Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T12:25:24.954Z Has data issue: false hasContentIssue false

Friction drag model for axial turbulent flow along the surface of a circular cylinder based on the universal characteristics of wall turbulence

Published online by Cambridge University Press:  25 November 2024

Takashi Ohta*
Affiliation:
CFD Research Group, Department of Mechanical and System Engineering, University of Fukui, 3-9-1 Bunkyo, Fukui 910-8507, Japan
Futaro Shirahata
Affiliation:
CFD Research Group, Department of Mechanical and System Engineering, University of Fukui, 3-9-1 Bunkyo, Fukui 910-8507, Japan
*
†Email address for correspondence: t-ohta@u-fukui.ac.jp

Abstract

The friction drag of the axial flow along the outer surface of a cylinder varies with the cylinder radius and flow conditions. This study included direct numerical simulations of the axial turbulent flow along a circular cylinder under different conditions for obtaining the turbulence statistics and wall friction coefficient. Then the characteristics of velocity streaks were observed from a geometrical perspective of turbulence structures around the circular cylinder, and compared with the characteristics of the turbulence structures in a boundary layer on a flat plate. The results showed that the velocity streak spacing and the distance between the velocity streak and the cylinder surface in the viscous length scale do not vary substantively with the radius of the cylinder, and are the same as those of the turbulent flow along a flat plate. Therefore, they can be considered geometrical characteristics of the turbulence structure independent of the cylinder radius. Moreover, the friction coefficient per pair of high- and low-speed velocity streaks is the same as that of flat-plate turbulent flow, independent of the cylinder radius, and can be regarded as a dynamical characteristic for a pair of velocity streaks. Two equations were derived based on the characteristics of wall turbulence. The characteristics of the turbulence predicted by the two formulae were consistent with the simulation results. Consequently, we showed that the wall friction coefficient and number of the velocity streak pairs, which are statistical and structural characteristics of wall turbulence, can be predicted appropriately by specifying the radius Reynolds number.

Information

Type
JFM Papers
Copyright
© The Author(s), 2024. Published by Cambridge University Press
Figure 0

Figure 1.Schematics of the computational domain and boundary conditions.

Figure 1

Table 1.Computational domain and grid sizes at each radius Reynolds number $\textit {Re}_a$. The sizes are normalised with the viscous length scale. Information on the different sizes used in a previous study (Ohta 2017) is shown for comparison.

Figure 2

Figure 2.Comparison of the mean velocity profiles at radius Reynolds numbers $\textit {Re}_a=1500, 750, 300, 120$. The logarithmic law and wall law for flat-plate turbulent flow, and the results of past studies for turbulent flow along a circular cylinder at $\textit {Re}_a=311$ and $120$, are also included to validate the reliability of the simulations.

Figure 3

Figure 3.Comparison of the velocity fluctuation intensities. The results of previous studies for turbulent flow along a circular cylinder at $\textit {Re}_a=311$ and $120$ are shown to validate the reliability of the simulations.

Figure 4

Figure 4.Comparison of the streamwise vorticity fluctuation intensities. The results of previous studies for turbulent flow along a circular cylinder at $\textit {Re}_a=311$ and $120$ are also shown to validate the reliability of the simulations.

Figure 5

Figure 5.Variation in the wall friction velocity depending on the radius Reynolds number $\textit {Re}_a$. The wall friction velocity is normalised with that of the flat-plate turbulent flow.

Figure 6

Figure 6.Instantaneous structures of high- and low-speed velocity streaks and quasi-streamwise vortices around each circular cylinder at radius Reynolds numbers (a) $\textit {Re}_a=1500$, (b) $\textit {Re}_a=750$, (c) $\textit {Re}_a=300$, and (d) $\textit {Re}_a=120$. The velocity streaks are visualised with the isosurfaces of the streamwise velocity fluctuation (blue for $v'^+_z=-2.4$, red for $v'^+_z=+2.4$), and the vortices are visualised with the isosurfaces of the streamwise vorticity fluctuation (green for ${\omega }'^+_z= \pm 0.2$).

Figure 7

Figure 7.Instantaneous distributions of the streamwise velocity fluctuation around a circular cylinder on a plane normal to the axial direction at radius Reynolds numbers (a) $\textit {Re}_a=1500$, (b) $\textit {Re}_a=750$, (c) $\textit {Re}_a=300$, and (d) $\textit {Re}_a=120$. The numbers of the velocity streak pairs observed on the planes at $\textit {Re}_a=1500, 750, 300, 120$ are $5, 3, 2, 1$, respectively.

Figure 8

Figure 8.Circumferential angular two-point correlation of the streamwise velocity fluctuation at the radius Reynolds numbers $\textit {Re}_a=1500, 750, 300, 120$. The distance to the first minimum of the correlation is the mean spacing between adjacent opposite-sign streaks.

Figure 9

Figure 9.Variation of the average number of high- and low-speed velocity streak pairs depending on the radius Reynolds number $\textit {Re}_a$. The number of velocity streak pairs was estimated from the mean spacing between the same-sign streaks.

Figure 10

Figure 10.Schematic models of velocity streak distribution around a circular cylinder in the cases (a) $N=1$, (b) $N=2$, and (c) $N \geq 3$. The spacing between velocity streaks around a circular cylinder in the model is defined depending on the number of velocity streak pairs.

Figure 11

Figure 11.Comparison of the mean streak spacing normalised with the viscous length scale depending on the radius Reynolds number $\textit {Re}_a$. The mean streak spacing for turbulent channel flow is shown for comparison.

Figure 12

Figure 12.Comparison of the mean distance between the streaks and the wall surface normalised with the viscous length scale depending on the radius Reynolds number $\textit {Re}_a$. Vertical bars indicate the standard errors for the magnitude of the scatter in each case. The mean streak spacing for the turbulent channel flow is shown for comparison.

Figure 13

Figure 13.Friction coefficient for each streak pair number estimated from the radius Reynolds number $\textit {Re}_a$ with the proposed formula (4.9), and the DNS results with the mean streak pair number $N$. Predictions by the models of White (1972) ($z/a=500$), Gould & Smith (1980) and Alam (2020) are shown as blue solid, dashed and dotted lines, respectively, for comparison. Also, a prediction of White (1972) ($z/a=100$) is shown as a red solid line. The results of Willmarth et al. (1976), Luxton et al. (1984) and Neves et al. (1994) are plotted as blue circle, triangle and filled circle symbols, respectively.

Figure 14

Figure 14.Relationship among the radius Reynolds number $\textit {Re}_a$, mean velocity streak pair number $N$, and wall friction coefficient $C_f$ estimated using the proposed formula. The DNS results are shown for comparison.

Figure 15

Figure 15.Comparison of the friction coefficient per pair of high- and low-speed velocity streaks depending on the radius Reynolds number $\textit {Re}_a$. The friction coefficient per velocity streak pair for turbulent boundary-layer flow along a flat plate is shown for comparison.

Figure 16

Figure 16.Relationship among the radius Reynolds number $\textit {Re}_a$, mean velocity streak pair number $N$, and wall friction coefficient $C_f$ estimated by the combination of the two equations. The DNS results are shown for comparison.

Figure 17

Figure 17.Relationship among the radius Reynolds number $\textit {Re}_a$, mean velocity streak pair number $N$, and wall friction coefficient $C_f$ estimated by the combination of the two formulae over a wide range of $\textit {Re}_a$. The DNS results are also shown for comparison. The friction coefficient for flat-plate turbulent flow can be predicted by combining the formulae at $\textit {Re}_a \rightarrow \infty$.

Figure 18

Table 2.Comparison of the average numbers of the wall friction coefficient and velocity streak pairs estimated by the present DNS and the proposed model at each radius Reynolds number. The relative errors of the model predictions to the DNS and results of the previous studies are shown to verify the prediction accuracy of the model. The results of the previous studies (White 1972; Gould & Smith 1980; Willmarth et al.1976; Luxton et al.1984; Neves et al.1994) are also compared with the model estimates.