Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T02:42:14.684Z Has data issue: false hasContentIssue false

Three-dimensional wake transition of a diamond-shaped cylinder

Published online by Cambridge University Press:  14 May 2021

Hongyi Jiang*
Affiliation:
School of Engineering, The University of Western Australia, 35 Stirling Highway, Perth, WA 6009, Australia
*
†Email address for correspondence: hongyi.jiang@uwa.edu.au

Abstract

Three-dimensional (3-D) wake transition for flow past a diamond cylinder is investigated numerically. Detailed 3-D direct numerical simulations (DNS) show that the wake is represented by mode A with global vortex dislocations for Reynolds numbers Re = 121–150, followed by a mode swapping between modes A and B for Re = 160–210 and increasingly disordered mode B for Re ≥ 220. In the mode swapping regime, different characteristics of the dislocation and non-dislocation periods are revealed by decomposing flow properties (e.g. the root-mean-square lift coefficient) into the values corresponding to the dislocation and non-dislocation periods. Such decomposition helps to explain some major differences observed for the cases of a diamond and a circular cylinder. In addition to DNS, Floquet stability analyses are conducted to identify the 3-D wake instability modes of a diamond cylinder up to Re = 300. Phase-averaged base flow is used to eliminate the quantitative uncertainties induced by the aperiodic secondary vortex street of the base flow. Interestingly, a subharmonic instability mode is identified at Re ≥ 285, whereas mode B is absent. The origin of the subharmonic mode is explained. The disagreement between the DNS and the Floquet analysis regarding the existence of mode B and the subharmonic mode is also explained. It is found that the natural 3-D flow involves complex interactions between the streamwise and spanwise vortices, as well as between the 3-D wake transition and the two-dimensional base-flow transition, which excite mode B and suppress the subharmonic mode.

Information

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Figure 1.(a) Schematic model of the computational domain (not to scale), and (b) close-up view of the 2-D mesh near the cylinder.

Figure 1

Table 1.Mesh dependence check of some major flow properties for Re = 250. The results other than the reference case are shown by the relative differences with respect to those of the reference case.

Figure 2

Figure 2.Mesh dependence check of the velocity profiles sampled at a few streamwise locations for Re = 250: (a) time-averaged streamwise velocity profiles, (b) time-averaged transverse velocity profiles, (c) root-mean-square streamwise velocity profiles and (d) root-mean-square transverse velocity profiles. The velocity profiles were also averaged over the cylinder span.

Figure 3

Figure 3.Floquet stability analysis results: (a) dependence of the dominant Floquet multiplier μ on the spanwise wavenumber β, and (b) the neutral instability curve of mode A.

Figure 4

Figure 4.Instantaneous vorticity fields in the near wake of a diamond cylinder for (a–f) Re = 125 with t* = 80, 120, 320, 400, 480 and 520, (g–i) Re = 150 with t* = 1605, 1645 and 1675, (j–k) Re = 190 with t* = 1360 and 1380 and (l) Re = 240 with t* = 2125. The translucent iso-surfaces represent spanwise vortices with ωz = ±1.0, while the opaque iso-surfaces represent streamwise vortices with ωx = ±0.02 for panels (a,b), ωx = ±0.3 for panel (c), ωx = ±0.5 for panels (d–f), ωx = ±0.8 for panels (g–i), and ωx = ±1.0 for panels (j–l). Dark grey and light yellow denote positive and negative vorticity values, respectively. The flow is from left to right past the cylinder on the left.

Figure 5

Figure 5.Quantification of the intermittent appearance of global vortex dislocations in the range of Re = 150–220. The shaded and clear blocks indicate dislocation and non-dislocation time periods, respectively.

Figure 6

Figure 6.Probability of occurrence of vortex dislocation for Re over the mode swapping regime.

Figure 7

Figure 7.Time histories of the lift coefficient for Re = 160–210, overlaid with shaded and clear regions representing dislocation and non-dislocation time periods, respectively.

Figure 8

Figure 8.(a) The ${C^{\prime}_L}\text{--}Re$ relationship, and (b) the $\varepsilon_x\text{--}Re$ and $\varepsilon_y\text{--}Re$ relationships (integrated over x/h = 0–20) over the wake transition regimes.

Figure 9

Figure 9.(a) The ${C^{\prime}_L}\text{--}Re$ relationship, and (b) the $\varepsilon_x\text{--}Re$ relationship (integrated over x/D = 0–10) over the wake transition regimes for flow past a circular cylinder.

Figure 10

Figure 10.Frequency spectra of CL for Re = 140–240.

Figure 11

Figure 11.Frequency spectra of CL for (a) flow past a diamond cylinder at Re = 180, and (b) flow past a circular cylinder at Re = 250.

Figure 12

Figure 12.The St–Re relationship over the wake transition regimes.

Figure 13

Figure 13.The $\overline {{C_D}}\text{--}Re$ relationship over the wake transition regimes.

Figure 14

Figure 14.The ratio between the pressure drag and the total drag for different cylinders. The red vertical bars indicate the onset of three-dimensionality.

Figure 15

Figure 15.Characteristics of the 2-D base flow for Re = 300: (a) instantaneous vorticity field at t* = 1400, (b) instantaneous vorticity field at t* = 1400 + T*, (c) locations of the vortex centres extracted from 19 snapshots of the vorticity field (at t* = 1000 to 2800 with an interval of 100) and (d) time-averaged transverse velocity field. The vertical dashed lines mark the two transition locations, while the horizontal dashed line in panels (c,d) marks the wake centreline.

Figure 16

Figure 16.The |μ|−β relationships for Re = 300, predicted through the Floquet analysis using different base flows. The horizontal dashed line marks the neutral instability of |μ| = 1.0.

Figure 17

Figure 17.Illustration of T-periodic base flows for Re = 300. Panels (a,b) show instantaneous vorticity fields for the phase-averaged base flow at two phases of T/2 apart, while panels (c,d) show instantaneous vorticity fields for the stabilised base flow at two phases of T/2 apart. The base flows in panels (a,c) are shown at the same phase as figure 15(a,b). The vertical dashed lines mark the two transition locations for the original aperiodic 2-D flow.

Figure 18

Figure 18.The neutral instability curves for mode A and the subharmonic mode. The Floquet analyses for Re ≥ 160 are performed based on the phase-averaged base flow.

Figure 19

Figure 19.Instantaneous ωz (a,c,e) and ωx (b,d,f) fields at the plane z/h = 0.1 for the 3-D DNS case of Re = 300 and Lz/h = 1.4. Panels (a,b) are shown at an arbitrary time instant in the fully developed flow, while panels (c,d) and (e,f) are shown at time evolutions of T and 2T, respectively.

Figure 20

Figure 20.Instantaneous vorticity fields for Re = 300 predicted by the 3-D DNS using (a) Lz/h = 3 and (b) Lz/h = 6. The translucent iso-surfaces represent spanwise vortices with ωz = ±2, while the opaque iso-surfaces represent streamwise vortices with ωx = ±0.4 for panel (a) and ωx = ±2 for panel (b). Dark grey and light yellow denote positive and negative vorticity values, respectively. The flow is from left to right past the cylinder on the left.

Figure 21

Table 2.Wake structures for Re = 300 predicted by the 3-D DNS under different Lz/h constraints.

Figure 22

Figure 21.Span-averaged spanwise vorticity fields for Re = 300, obtained from (a) the instantaneous 3-D flow field shown in figure 20(a) computed with Lz/h = 3, and (b) the phase-averaged 3-D flow computed with Lz/h = 6.

Figure 23

Figure 22.The |μ|−β relationship for Re = 300, predicted through the Floquet analysis using the modulated base flow. The horizontal dashed line marks the neutral instability of |μ| = 1.0.

Figure 24

Figure 23.Streamwise perturbation vorticity fields for Re = 300: (a) mode A predicted by βh = 1.8 of the modulated base flow, (b) mode B predicted by βh = 7 of the modulated base flow, (c) mode A predicted by βh = 1.4 of the phase-averaged base flow and (d) the subharmonic mode predicted by βh = 3.2 of the phase-averaged base flow. Red and blue denote positive and negative vorticity values, respectively.