Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T06:53:54.969Z Has data issue: false hasContentIssue false

Effects of Susceptor Geometry on Gan Growth on Si(111) with a New MOCVD Reactor

Published online by Cambridge University Press:  13 June 2014

Yungeng Gao
Affiliation:
Department of Chemical Engineering and Condensed Matter and Surface Science Program, Ohio University, Athens, OH 45701
Daniel A. Gulino
Affiliation:
Department of Chemical Engineering and Condensed Matter and Surface Science Program, Ohio University, Athens, OH 45701
Ryan Higgins
Affiliation:
Condensed Matter and Surface Science Program, Ohio University, Athens, OH 45701

Abstract

High quality GaN films on AlN buffer layers were grown on Si(111) with a new, commercial, two-injector vertical rotating disk MOCVD reactor (CVD, Inc.). It was found that the geometry of the susceptor greatly affected the structural quality of the epilayers on Si. For the original susceptor geometry, though single crystal GaN films could be obtained, the films were dark gray in appearance with a rough morphology, and the best x-ray rocking curve FWHM was 2.33°. After modifying the susceptor geometry, transparent, mirror-like single crystal GaN films were obtained with the best x-ray rocking curve FWHM being 0.24°. Photoluminescence (PL) and infrared reflectance (IR) spectra of the grown films were compared. The film growth rate was found to increase with decrease of the growth pressure. A 2-D simulation of the flow, heat transfer, and chemical species transport in the reactor showed a more symmetric flow, larger velocity gradient, and lower upward velocity with the modified susceptor, which may be the main reason for the improvement of the structural quality of the films.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Figure 1.(a) schematic of the MOCVD reaction chamber. (b) original susceptor shape. (c) modified susceptor shape.

Figure 1

Figure 2.X-ray rocking curves on the GaN (0002) reflection. The curves for samples 1 and 4 are labeled.

Figure 2

Figure 3.Photoluminescence spectra of the samples.

Figure 3

Figure 4.IR transmittance spectra.

Figure 4

Figure 5.IR absorbance spectra.

Figure 5

Figure 6.Vertical velocity contours for the original susceptor model.

Figure 6

Figure 7.Vertical velocity contours for the modified susceptor model.