Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T12:47:13.666Z Has data issue: false hasContentIssue false

Investigations on the turbulent${\boldsymbol{/}}$non-turbulent interface in supersonic compressible plate turbulent boundary layer

Published online by Cambridge University Press:  03 June 2024

Shuhuai Su
Affiliation:
Fluid Mechanics Key Laboratory of Education Ministry, Beihang University, Beijing 100191, PR China
Yanguang Long
Affiliation:
Fluid Mechanics Key Laboratory of Education Ministry, Beihang University, Beijing 100191, PR China
Jinjun Wang*
Affiliation:
Fluid Mechanics Key Laboratory of Education Ministry, Beihang University, Beijing 100191, PR China
Xinliang Li
Affiliation:
LHD, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, PR China
*
†Email address for correspondence: jjwang@buaa.edu.cn

Abstract

The turbulent boundary layer (TBL) is a widely existing flow phenomenon in nature and engineering applications. Its strong mixing effect can achieve more sufficient material mixing, heat transport, etc. The understanding of the entrainment process and mechanism of irrotational fluids entering the turbulent region can be promoted by studying the geometric and dynamic characteristics of turbulent${/}$non-turbulent interfaces (TNTI). In compressible flow, it is unclear whether the properties of TNTI will change and whether the entrainment will show different features due to the influence of compressibility. Based on the direct numerical simulation results of supersonic compressible plate TBLs with Mach number of 2.9, the geometric and dynamic characteristics of TNTI are investigated in this paper. The interface is identified by the enstrophy method, and the height, thickness, fractal dimension, enstrophy transportation and entrainment characteristics of the interface are investigated. It is found that for the enstrophy transportation in a TBL, the contribution of compressibility-related terms accounts for approximately 13.4 % of the total enstrophy transportation, which tends to transfer the enstrophy of turbulence near the interface to both directions vertical to the interface. This promotes the expansion of the turbulent region towards the non-turbulent region, and the mean height, thickness and entrainment velocity are increased by approximately 3.7 %, 7.0 % and 8.5 %, respectively, while the fractal dimension is basically unaffected. Different from the incompressible flow, the contribution of the compressibility-related terms to the entrainment velocity is independent of the local curvature, and the intense entrainment process is more likely to occur on a highly curved concave surface.

Information

Type
JFM Papers
Copyright
© The Author(s), 2024. Published by Cambridge University Press
Figure 0

Figure 1.Instantaneous streamwise velocity, temperature and density fields. (a) Streamwise velocity field normalized by incoming velocity. (b) Temperature field normalized by incoming flow temperature. (c) Density field normalized by incoming flow density.

Figure 1

Figure 2.The streamwise variation of thickness and shape factor of the boundary layer: blue line with diamonds for thickness and red line with squares for shape factor.

Figure 2

Figure 3.Mean profiles of streamwise velocity at different streamwise positions of the developing region.

Figure 3

Figure 4.Mean profile of streamwise velocity of turbulent region corrected by van Driest transformation at $Re_x=2.29\times 10^6$.

Figure 4

Figure 5.The streamwise variation of skin friction coefficient.

Figure 5

Figure 6.Normalized r.m.s. velocity and Reynolds stress at different positions compared with previous results. Inner scale $y^+$ is used in (a,c) while semilocal scale $y^*$ is used in (b,d).

Figure 6

Figure 7.Mean profile of spanwise gradient of the streamwise velocity at $Re_x=2.0\times 10^6$.

Figure 7

Figure 8.The mean profile of turbulent Mach number at $Re_x=2.29 \times 10^6$.

Figure 8

Figure 9.Threshold selection. (a) Probability density distribution of enstrophy. (b) Volume fractions and the first derivative of it plotted against threshold selection.

Figure 9

Figure 10.Volume fractions and the first derivative of it plotted against threshold selection at different positions. Solid lines represent the volume fractions while dash lines are used to represent the first derivative.

Figure 10

Figure 11.Instantaneous enstrophy contour plot and instantaneous TNTI recognized by enstrophy method and UMZ method.

Figure 11

Figure 12.Streamwise variation of mean and r.m.s. interface height.

Figure 12

Table 1.Comparison of mean and r.m.s. height with previous works.

Figure 13

Figure 13.Establishment of interface coordinate axis (Watanabe et al.2018).

Figure 14

Figure 14.Conditioned mean profile of enstrophy field and its derivative with respective to interface coordinate $y_{I}$.

Figure 15

Figure 15.Comparison of interface thickness with the works by Zhang et al. (2018b, 2023).

Figure 16

Figure 16.The fractal characteristic of TNTI. (a) Interface fractal dimension in the range of $Re_{x}=1.95\times 10^6$–$2.23 \times 10^6$. (b) The streamwise variation of fractal dimension.

Figure 17

Figure 17.Comparison of fractal dimension results between present work and previous works.

Figure 18

Figure 18.Conditional mean profiles of production, viscous diffusion and viscous dissipation.

Figure 19

Figure 19.Conditional mean profiles of enstrophy transport components.

Figure 20

Figure 20.The influence of compressibility. (a) Comparison of total enstrophy transportation and the contribution of compressibility irrelevant items. The changes near the interface are magnified. (b) Proportion of compressibility-related terms plotted against different locations in the interface coordinate system.

Figure 21

Figure 21.Convergence verification of compressibility effect. (a) The variation of minimum percentage plotted against the number of samples. (b) The position of the minimum percentage in the interface coordinate plotted against the number of samples.

Figure 22

Figure 22.(a) Probability density function of entrainment velocity. (b) Probability density function of the contribution of different components to the entrainment velocity.

Figure 23

Figure 23.Joint p.d.f.s of local curvature and (a) production term, (b) viscous diffusion, (c) viscous dissipation, (d) compressibility independent term.

Figure 24

Figure 24.Joint p.d.f.s of local curvature and (a) the dilatation term, (b) the baroclinic term, (c) the density gradient term, (d) the entrainment velocity.

Figure 25

Figure 25.Probability density function of velocity divergence.

Figure 26

Figure 26.Local entrainment mass flux plotted against velocity divergence. Here $\bar {\theta }$ is the mean momentum thickness.

Figure 27

Figure 27.The instantaneous contour plots of dilatation terms $\varOmega _{II}$ and $\lambda _{ci}$.

Figure 28

Figure 28.Local details of instantaneous contour plots of $\varOmega _{II}$ and $\lambda _{ci}$.

Figure 29

Figure 29.Conditional mean profiles of local minimum and maximum values of dilatation term.

Figure 30

Figure 30.The conditional mean profile of the $|\boldsymbol {\nabla } \varOmega |$ plotted against the dilatation term.