Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T09:12:01.712Z Has data issue: false hasContentIssue false

Phase-based control of periodic flows

Published online by Cambridge University Press:  29 September 2021

Aditya G. Nair*
Affiliation:
Department of Mechanical Engineering, University of Nevada, Reno, NV 89557, USA
Kunihiko Taira
Affiliation:
Department of Mechanical and Aerospace Engineering, University of California, Los Angeles, CA 90095, USA
Bingni W. Brunton
Affiliation:
Department of Biology, University of Washington, Seattle, WA 98195, USA
Steven L. Brunton
Affiliation:
Department of Mechanical Engineering, University of Washington, Seattle, WA 98195, USA
*
†Email address for correspondence: adityan@unr.edu

Abstract

Unsteady bluff-body flows exhibit dominant oscillatory behaviour owing to periodic vortex shedding. The ability to manipulate this vortex shedding is critical to improving the aerodynamic performance of bodies in a flow. This goal requires a precise understanding of how the perturbations affect the asymptotic behaviour of the oscillatory flow and of the ability to control transient dynamics. In this work, we develop an energy-efficient flow-control strategy to alter the oscillation phase of time-periodic fluid flows rapidly. First, we perform a phase-sensitivity analysis to construct a reduced-order model for the response of the flow oscillation to impulsive control inputs at various phases. Next, we introduce a real-time optimal phase-control strategy based on the phase-sensitivity function obtained by solving the associated Euler–Lagrange equations as a two-point boundary-value problem. Our approach is demonstrated for the incompressible laminar flow past a circular cylinder and an airfoil. We show the effectiveness of phase control with different actuation inputs, including blowing and rotary control. Moreover, our control approach is a sensor-based approach without the need for access to high-dimensional measurements of the entire flow field.

Information

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Figure 1.Overview of phase-reduction analysis: (a) introduction of impulse flow perturbation, (b) baseline and perturbed lift coefficient trajectories (left, phase portrait of oscillations in $\dot {C}_L\text {-}C_L$ plane; right, time history) and (c) phase-sensitivity function $\boldsymbol {Z}(\theta )$. Overview of energy-optimal phase control: (d) design of optimal control input $u(t)$ for desired phase shift $\Delta \theta$ and (e) controlled flow with the forcing $\boldsymbol {f}(t)$; (f) transient and steady-state response of lift coefficient on application of control.

Figure 1

Figure 2.Summary of the examples considered in this work for optimal phase control: (a) SL oscillator, (b) unsteady flow over a cylinder at $Re = 100$ with rotary and blowing/suction ($x$-direction) actuation, (c) unsteady two-dimensional flow over an airfoil at $Re = 1000$ and angle of attack of $\alpha = 9^\circ$ with blowing/suction actuation.

Figure 2

Figure 3.Overview of phase reduction and optimal phase control for the SL oscillator: (a) baseline trajectories; (b) analytical phase-sensitivity function and optimal control design for desired phase shifts of $-2{\rm \pi} /5 \leqslant \Delta \theta \leqslant 2{\rm \pi} /5$; (c) phase-coordinate dynamics; (d) dynamics of the Lagrange multiplier; and (e) the optimal control input from the Euler–Lagrange equations.

Figure 3

Figure 4.Optimal phase control (using Euler–Lagrange equation) of the SL oscillator with (a) no noise ($\sigma = 0$) and (b) stochastic dynamics $\sigma = 0.05$. Model predictive control of SL oscillator with (c) no noise ($\sigma = 0$) and (d) stochastic dynamics $\sigma = 0.05$. For each case, the control input $u(t)$, trajectory $y(t)$ and radial amplitude $r(t)$ are shown.

Figure 4

Figure 5.Overview of phase reduction and optimal phase control for cylinder flow using rotary actuation: (a) lift coefficient ($C_L$) of baseline cylinder flow with respect to the phase coordinate $\theta$, (b) phase-sensitivity function and (c) its gradient (right) for impulse perturbation introduced at an actuator located near the top separation point in the $\hat {e}_x$ direction, (d) energy-optimal control input required to shift the phase of oscillation (with associated cost function in inset), (e) lift and ( f) drag characteristics after application of forcing in direct numerical simulations, and (g) instantaneous flow fields immediately after control is turned off ($t = T^*$). The colour of the lines corresponds to the cases with desired phase shift $\Delta \theta$, $\Delta \theta = 0$ indicates baseline.

Figure 5

Figure 6.Overview of phase reduction and optimal phase control for cylinder flow using a momentum injection: (a) lift coefficient ($C_L$) of baseline cylinder flow with respect to the phase coordinate $\theta$, (b) phase-sensitivity function and (c) its gradient (right) for impulse perturbation introduced at an actuator located near the top separation point in the $\hat {e}_x$ direction, (d) the energy-optimal control input required to shift the phase of oscillation (with associated cost function in inset), (e) lift and ( f) drag characteristics after application of forcing in direct numerical simulations, and (g) instantaneous flow fields immediately after control is turned off ($t = T^*$). The colour of the lines corresponds to the cases with desired phase shift $\Delta \theta$, with $\Delta \theta = 0$ indicating the baseline.

Figure 6

Figure 7.Comparison of control performance for rotary actuation and momentum injection: (a) maximum lift coefficient, (b) lift impulse and (c) error in asymptotic phase shift for varying desired phase shifts.

Figure 7

Figure 8.Vorticity flux comparison with respect to the baseline for (a) rotary control and (b) momentum injection.

Figure 8

Figure 9.Overview of phase reduction and optimal phase control for flow over an airfoil using momentum injection: (a) lift coefficient ($C_L$) of baseline cylinder flow with respect to the phase coordinate $\theta$, (b) phase-sensitivity function and (c) its gradient (right) for impulse perturbation introduced at an actuator located near the top separation point in the $\hat {e}_x$ direction, (d) energy-optimal control input required to shift the phase of oscillation (with associated cost function in inset), (e) lift characteristics after application of forcing in direct numerical simulations for negative and positive phase shifts (shown separately) and ( f) instantaneous flow fields after control is turned off ($t = 2T^*$). The colour of the lines corresponds to the cases with desired phase shift $\Delta \theta$, $\Delta \theta = 0$ indicates baseline. For visual clarity, the fluctuations in the controlled lift trajectories are shown as shaded areas relative to the baseline lift coefficient.

Figure 9

Figure 10.Evaluation of control performance: (a) maximum lift coefficient and (b) lift impulse for varying phase shifts.

Figure 10

Figure 11.(a) Schematic of the MPC structure and (b) receding horizon framework (adapted from Kaiser, Kutz & Brunton 2018).