Hostname: page-component-74656f9884-2dmjx Total loading time: 0 Render date: 2026-11-07T13:15:10.134Z Has data issue: false hasContentIssue false
  • English
  • Français

Editorial of the special issue: innovative robot design for special applications

Published online by Cambridge University Press:  30 January 2024

Alessandro Gasparetto Open the ORCID record for Alessandro Gasparetto [Opens in a new window] ,
Yukio Takeda Open the ORCID record for Yukio Takeda [Opens in a new window]  and
Giulio Rosati
Alessandro Gasparetto
Affiliation:
Polytechnic Department of Engineering and Architecture, University of Udine, Udine, Italy
Yukio Takeda
Affiliation:
Tokyo Institute of Technology, Tokyo, Japan
Giulio Rosati
Affiliation:
Department of Industrial Engineering, University of Padua, Padua, Italy
Rights & Permissions [Opens in a new window]

Abstract

An abstract is not available for this content. As you have access to this content, full HTML content is provided on this page. A PDF of this content is also available in through the ‘Save PDF’ action button.

Information

Type
Editorial
Information
Robotica , Volume 42 , Issue 6 , June 2024 , pp. 1712 - 1714
Copyright
© The Author(s), 2024. Published by Cambridge University Press

Nowadays, robots are employed not only in traditional domains (such as industrial factories) but also in many other fields, where they can substitute or help human operators. Special applications are envisaged, and innovative robots to carry out these tasks should be designed. Novel approaches and techniques are therefore needed, in order to be able to build robotic devices that can deal with new issues and nonstandard requirements.

What has been mentioned above is one of the most crucial problems in robotics nowadays, and it has been discussed in many conferences and workshops of the robotic community, such as the International Conference of IFToMM Italy (IFIT).

Some of the papers published in this Special Issue are, indeed, extended versions of works presented at the 4th International Conference of IFToMM Italy (IFIT 2022), held in Naples (Italy) on September 7–9, 2022.

The topic of Innovative Robot Design for Special Applications encompasses many aspects, such as the functional design of robotic devices, the kinematic and dynamic modeling of mechanisms, the planning of profiles and trajectories, the study of vibrations, the control of mechanical systems, only to mention some.

The papers of this Special Issue deal with many of the above mentioned topics. Paper [Reference Stretti, Fanghella, Berselli and Bruzzone1] discusses the analytical expressions of a motion profile characterized by elliptic jerk and compares it with other motion laws, such as trapezoidal velocity, trapezoidal acceleration, cycloidal, sinusoidal jerk, and modified sinusoidal jerk. It is shown that the proposed motion law provides a good compromise between different performance indexes, namely settling time, and maximum absolute values of velocity and acceleration.

Issues related with the design of special robots are considered in ref. [Reference Emet, Gür and Dede2], where the design and kinematic representation of a soft robot in a simulation environment is carried out. Modeling soft robots is indeed a challenging task, since classical modeling techniques are suitable for rigid link mechanisms, that have a limited number of degrees of freedom (DOFs), while robots with flexible links have an infinite number of DOFs. The authors propose a novel procedure for modeling of soft robots, based on the piecewise constant curvature approach, which is then validated through application to a soft biomimetic robotic squid designed for underwater manipulation.

The design of a complex robot for special tasks is carried out in ref. [Reference Fuge, Herron, Beiter, Kalita and Leonessa3], where a new humanoid robotic platform implementing additive manufacturing techniques is considered. Joint configurations, as well as the range of motion, of the lower body of the humanoid robot are discussed. Moreover, finite element analysis is performed to check the structural integrity and to avoid structural failures in the robot.

Paper [Reference Ju, Li, Kang, Zhang and Song4] deals with another issue related to robots for special applications, namely the design of nonlinear stiffness elastic actuators (NSEAs). In this paper, a general design method of torsional compliant mechanism through given discrete torque-deflection points is proposed, then the dimensional parameters of proposed compliant mechanism are designed satisfying the condition of the given torque-deflection points. The method is finally validated by means of dedicated experiments on a NSEA built by the authors.

When designing new robots, a fundamental issue is the singularity of the kinematic chain. In ref. [Reference Demjen, Lovasz, Ceccarelli, Sticlaru, Lupuţi, Oarcea and Silaghi-Perju5], the kinematic analysis and the synthesis of a five-bar linkage with symmetrical structure and singularity-free dexterous workspace is carried out. A complete model is developed, which allows to design a singularity-free mechanism, which is then built and experimentally tested with success.

Paper [Reference Prasad and Ganesh6] studies a new load-balancing method, based on a passive damper mechanism, to overcome the problems arising when a heavy load is applied to the parallel manipulators, in particular inaccuracies while positioning the end-effector or unbalanced dynamic forces in the legs. The designed mechanism compensates the inertia effects, while countering the static inaccuracies in the parallel mechanism.

Mobile robotics is a field where many special applications can be envisaged, hence a lot of scientific research is aimed at studying innovative techniques to be applied to mobile platforms and autonomous navigation. In this Special Issue, paper [Reference Fasiolo, Scalera and Maset7] proposes a comparison of open-source LiDAR and inertial measurement unit-based simultaneous localization and mapping approaches for 3D robotic mapping, both for indoor and for outdoor navigation.

In ref. [Reference Grazioso, Ugenti, Galati, Mantriota and Reina8], the multibody model of a new passive articulated suspension tracked robot is presented. This multibody model allows the system performance to be evaluated in advance for fine-tuning of the design parameters and using different configurations, for example, with active and locked suspension. The digital twin is then validated through experimental tests.

Paper [Reference Cosenza, Niola, Pagano and Savino9] studies a modified rocker-bogie suspension for robotic rovers, designed for overcoming the problems due to the variation of the operation conditions of the rover (such as sloping ground, uneven ground surface, or different payload position), which can seriously affect the weight distribution. The proposed suspension can regulate the distribution of vertical loads among the wheels by means of a torsion spring, with adjustable preload, arranged between rocker and bogie.

Autonomous navigation issues are not limited to mobile robots, but are also relevant in special application of other types of robots. In ref. [Reference Sun, Ishida, Makino, Shibayama and Terada10], a novel collision avoidance system designed for the motion planning of Quad-SCARA in multipoint grasping state is proposed. The system, based on buffered Voronoi cells, is validated through complex experimental tests, such as folding and spreading a handkerchief.

Cable robots are often used for special applications, such as rehabilitation of injured patients. In ref. [Reference Zuccon, Doria, Bottin, Minto and Rosati11], the forced vibrations of cable-suspended rehabilitation robots, generated by rehabilitation exercises, are investigated. A two-cable planar model for the study of transverse vibrations is developed, taking into account stiffness and damping of the patient’s arm. It is found that the cable system exhibits a simple linear behavior when excited by robot motion and a non-linear behavior when excited by cable motion.

Paper [Reference Khadem, Inel, Carbone and Tich Tich12] presents a novel cable-driven parallel robot with the aim of rehabilitating/exercising young and disabled children in drawing and writing tasks. The robot has a pyramidal topology, so as to provide the required three active translational DOFs with a redundant set of five cables in a compact portable shape. Moreover, the robot has several attractive features: it is inexpensive, easy to control, easy to move to any place at home or school as it is fitting a home desk or classroom table; in addition, it has a specific user interface allowing both continuous and intermittent trajectories.

A medical robotic application is considered in ref. [Reference Zubair, Kansal and Mukherjee13], where instrumentation development and results for evaluating implant performance in the stabilized cranio-vertebral junction (CVJ) after surgical procedures are reported. Pose estimation of the CVJ region is estimated using a monocular vision-based setup, so as to evaluate the performance of vision-based intervertebral motion estimation of the CVJ in the Indian population, particularly in older people.

The last paper of this Special Issue [Reference Zhong, Wang, Hu and Han14] describes the design and the prototyping of an automatic wire stripping robot for use in a 10 kV power grid. High-voltage cable stripping is mostly done manually, which is inefficient and poses serious safety risks. The mechanical structure of the stripping robot is designed for installation on the insulating rod based on the working environment of 10 kV overhead cables.

References

Stretti, D., Fanghella, P., Berselli, G. and Bruzzone, L., “Analytical expression of motion profiles with elliptic jerk,” Robotica 41(7), 1976–1990 (2023). doi: 10.1017/S0263574723000255.CrossRefGoogle Scholar
Emet, H., Gür, B. and Dede, M.İ.C., “The design and kinematic representation of a soft robot in a simulation environment,” Robotica 42(1), 139–152 (2024). doi: 10.1017/S026357472300139X.CrossRefGoogle Scholar
Fuge, A. J., Herron, C. W., Beiter, B. C., Kalita, B. and Leonessa, A., “Design, development, and analysis of the lower body of next-generation 3D-printed humanoid research platform: PANDORA,” Robotica 41(7), 2177–2206 (2023). doi: 10.1017/S0263574723000395.CrossRefGoogle Scholar
Ju, W., Li, B., Kang, R., Zhang, S. and Song, Z., “Design of a torsional compliant mechanism with given discrete torque-deflection points for nonlinear stiffness elastic actuator,” Robotica 41(9), 2571–2587 (2023). doi: 10.1017/S0263574723000528.CrossRefGoogle Scholar
Demjen, T., Lovasz, E.-C., Ceccarelli, M., Sticlaru, C., Lupuţi, A.-M.-F., Oarcea, A. and Silaghi-Perju, D.-C., “Design of the five-bar linkage with singularity-free workspace,” Robotica 41(11), 3361–3379 (2023). doi: 10.1017/S0263574723001042.CrossRefGoogle Scholar
Prasad, A. X. R. and Ganesh, M., “Design, static analysis, and dynamic system modeling of 3-PPRS parallel manipulator with load-balancing UPS leg,” Robotica 41(9), 2735–2753 (2023). doi: 10.1017/S0263574723000632.CrossRefGoogle Scholar
Fasiolo, D. T., Scalera, L. and Maset, E., “Comparing LiDAR and IMU-based SLAM approaches for 3D robotic mapping,” Robotica 41(9), 2588–2604 (2023). doi: 10.1017/S026357472300053X.CrossRefGoogle Scholar
Grazioso, A., Ugenti, A., Galati, R., Mantriota, G. and Reina, G., “Modeling and validation of a novel tracked robot via multibody dynamics,” Robotica 41(10), 3211–3232 (2023). doi: 10.1017/S0263574723000966.CrossRefGoogle Scholar
Cosenza, C., Niola, V., Pagano, S. and Savino, S., “Theoretical study on a modified rocker-bogie suspension for robotic rovers,” Robotica 41(10), 2915–2940 (2023). doi: 10.1017/S0263574723000656.CrossRefGoogle Scholar
Sun, X., Ishida, K., Makino, K., Shibayama, K. and Terada, H., “Development of the “Quad-SCARA” platform and its collision avoidance based on Buffered Voronoi Cell,” Robotica 41(12), 3687–3701 (2023). doi: 10.1017/S0263574723001236.CrossRefGoogle Scholar
Zuccon, G., Doria, A., Bottin, M., Minto, R. and Rosati, G., “Vibrations of cable-suspended rehabilitation robots,” Robotica 41(12), 3702–3723 (2023). doi: 10.1017/S0263574723001248.CrossRefGoogle Scholar
Khadem, M., Inel, F., Carbone, G. and Tich Tich, A. S., “A novel pyramidal cable-driven robot for exercising and rehabilitation of writing tasks,” Robotica 41(11), 3463–3484 (2023). doi: 10.1017/S026357472300111X.CrossRefGoogle Scholar
Zubair, M., Kansal, S. and Mukherjee, S., “Investigating the vision-based intervertebral motion estimation of the Cadaver’s craniovertebral junction,” Robotica 41(10), 2907–2914 (2023). doi: 10.1017/S0263574723000644.CrossRefGoogle Scholar
Zhong, J., Wang, Z., Hu, S. and Han, Z., “A novel 10 kV high-voltage cable stripping robot’s mechanism design and analysis,” Robotica 41(9), 2605–2624 (2023). doi: 10.1017/S0263574723000565.CrossRefGoogle Scholar