Hostname: page-component-7b7567c8c-jswmv Total loading time: 0 Render date: 2026-11-15T12:44:05.284Z Has data issue: false hasContentIssue false

The instability nature of the Vogel–Escudier flow

Published online by Cambridge University Press:  09 February 2015

Miguel A. Herrada*
Affiliation:
E.S.I., Universidad de Sevilla, Camino de los Descubrimientos s/n 41092, Spain
Vladimir N. Shtern
Affiliation:
Shtern Research and Consulting, Houston, TX 77096, USA
M. M. Torregrosa
Affiliation:
E.S.I., Universidad de Sevilla, Camino de los Descubrimientos s/n 41092, Spain
*
†Email address for correspondence: herrada@us.es
Rights & Permissions [Opens in a new window]

Abstract

The instability of the steady axisymmetric flow in a sealed elongated cylinder, driven by a rotating end disk, is studied with the help of numerical simulations. It is argued that this instability is of the shear-layer type, being caused by the presence of an inflection point in the radial distribution of axial velocity of the base circulatory flow. The disturbance kinetic energy is localized in both the radial and axial directions, reaching its peak near the rotating disk, where the magnitude of base-flow axial velocity is close to its maximum. The critical Reynolds number, $\mathit{Re}_{cr}$ , is found to be nearly $h$ -independent for $h>5$ ; $h$ is the cylinder length-to-radius ratio. It is shown that the sidewall co-rotation suppresses the instability. As the co-rotation increases, the centrifugal instability becomes the most dangerous, i.e. determines $\mathit{Re}_{cr}$ . Physical explanations are given for the stabilizing effect of the co-rotation, which is stronger (weaker) for the shear-layer (centrifugal) instability.

Information

Type
Papers
Copyright
© 2015 Cambridge University Press 
Figure 0

Figure 1.Schematic of the problem.

Figure 1

Figure 2.Development of global counterflow as Re increases at $h=10$; $\mathit{Re}=1$ (a), 2000 (b), 4000 (c), and 5000 (d).

Figure 2

Figure 3.Dependence of $L$ (see figure 2a) on the Reynolds number. The dotted discrete points represent the linear approximation of the numerical data (solid curve).

Figure 3

Figure 4.Development of a local maximum of angular velocity ${\it\Omega}_{a}$ on the axis as Re (shown near the curves) increases; the dashed curve corresponds to the Kármán boundary layer.

Figure 4

Figure 5.Velocity on the axis near the rotating disk at $\mathit{Re}=500$; the dashed curve corresponds to the Kármán boundary layer.

Figure 5

Figure 6.Pressure contours near the rotating disk for $\mathit{Re}=1$ (a) and 500 (b). The pressure minimum location on the axis, $r=0$, shifts for larger $z$ as Re increases.

Figure 6

Figure 7.Azimuthal vorticity (a) and stream function (b) contours at $\mathit{Re}=3100$ and $h=8$. The dark contours are positive and the light contours negative.

Figure 7

Figure 8.Distribution of velocity $w_{a}$, angular velocity ${\it\Omega}_{a}$, and pressure $p$, as labelled, at the axis for $\mathit{Re}=3100$.

Figure 8

Figure 9.Critical values of (a) Reynolds number ($\mathit{Re}_{cr}$) and (b) disturbance frequency (${\it\omega}$) for cylinder aspect ratio $3.2. Letters mark our (M) and Sorensen et al.’s (S) results, respectively. Numbers next to ‘M’ and ‘S’ indicate helix value $m$.

Figure 9

Table 1.Dependence of critical stability characteristics on aspect ratio $h$.

Figure 10

Figure 10.Contours of constant kinetic energy $E_{d}$ of critical disturbance for $h=5.5$ (a), 6 (b), 6.5 (c), 7 (d), 7.5 (e), and 8 (f) at $\mathit{Re}=3100$.

Figure 11

Figure 11.$z$-dependence of base flow velocity, $w_{a}$, at axis $r=0$, and kinetic energy of critical disturbance, $E_{d}$, at $r=0.52$; for $h=8$ and $\mathit{Re}=\mathit{Re}_{cr}$.

Figure 12

Figure 12.$r$-dependence of base-flow velocities $u,v,w$, and kinetic energy of critical disturbance $E_{d}$ at $z=2.3$, for $h=8$ and $\mathit{Re}=\mathit{Re}_{cr}$.

Figure 13

Figure 13.Neutral curves of $z$-independent base flow for the $m$ values shown near the curves.

Figure 14

Table 2.Marginal and critical (bold) stability parameters for $z$-independent flow.

Figure 15

Table 3.Dependence of marginal and critical (bold) parameters on sidewall co-rotation ${\it\Omega}_{s}$ for shear-layer instability at $h=8$.

Figure 16

Figure 14.Effect of sidewall co-rotation on $z$-dependence of (a) base-flow velocity $w_{a}$, (b) angular velocity ${\it\Omega}_{a}$, and (c) pressure $p$ on axis $r=0$; for ${\it\Omega}_{s}=0$, 0.01, 0.02 and 0.025 at critical parameters listed in table 3.

Figure 17

Figure 15.Dependence on sidewall angular velocity ${\it\Omega}_{s}$ of marginal and critical Reynolds numbers for the shear-layer (K) and centrifugal (T) instabilities at $h=8$. Azimuthal wavenumbers $m$ of marginal disturbances are shown next to T and K.

Figure 18

Figure 16.Energy contours for marginal disturbance at ${\it\Omega}_{s}=0.03$,$\mathit{Re}=4633$, and $m=4$.

Figure 19

Figure 17.$r$-dependence of base-flow velocities $u$, $v$ and $w$ at $z=1.85$ for $h=8$,${\it\Omega}_{s}=0.03$, and $\mathit{Re}=4633$.

Figure 20

Figure 18.$r$-dependence of base-flow squared angular momentum $(rv)^{2}$ and energy $E_{d}$ of marginal disturbance at $z=1.85$ for ${\it\Omega}_{s}=0.03$, $\mathit{Re}=4633$, $m=4$, and $h=8$.

Figure 21

Table 4.Dependence of marginal and critical (bold) parameters on sidewall co-rotation ${\it\Omega}_{s}$ for centrifugal instability at $h=8$.

Figure 22

Figure 19.Energy contours for critical disturbance at $\mathit{Re}=5192$,${\it\Omega}_{s}=0.1$, and $m=5$.