Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-17T23:13:40.006Z Has data issue: false hasContentIssue false

New Materials-Theory-Based Model for Output Characteristics of AlGaN/GaN Heterostructure Field Effect Transistors

Published online by Cambridge University Press:  13 June 2014

J.D. Albrecht
Affiliation:
Department of Electrical and Computer Engineering, University of Minnesota, Minneapolis, MN 55455, U.S.A.Electronic Science and Technology Division, U.S. Naval Research Laboratory, Washington, DC 20375, U.S.A.
P.P. Ruden
Affiliation:
Department of Electrical and Computer Engineering, University of Minnesota, Minneapolis, MN 55455, U.S.A.
M.G. Ancona
Affiliation:
Electronic Science and Technology Division, U.S. Naval Research Laboratory, Washington, DC 20375, U.S.A.

Abstract

A new model is used to examine the DC output characteristics of AlGaN/GaN heterostructure field effect transistors. The model is based on the charge-control/gradual-channel approximation and takes into account the non-linear current vs. voltage characteristics of the ungated AlGaN/GaN heterostructure channel regions. The model also includes thermal effects associated with device self-heating. For the power dissipation levels considered for many applications, the thermal degradation of the carrier drift velocity is shown to cause a negative output conductance in saturation. The temperature is incorporated self-consistently into the model through the field and temperature dependent mobility obtained from Monte Carlo transport simulations for electron transport in GaN. Calculated results presented for the DC output characteristics of several AlGaN/GaN field effect transistors show a strong dependence on the thermal properties of the substrate material. The substrate materials considered in this work are sapphire, SiC, AlN, and GaN.

Information

Type
Research Article
Copyright
Copyright © 1996 Materials Research Society
Figure 0

Figure 1:Schematic HFET structure.

Figure 1

Table I:Structural thermal impedance parameters obtained from two-dimensional heat flow simulations.

Figure 2

Figure 2:Calculated DC output characteristics for HFET devices on Al2O3 (solid), GaN (dashed), AlN (dotted), and SiC (dashed-dotted) are shown.VT=−4.0 Rc=0.5Ωmm (2a): HFET I-Vs LGS=LG=LGD=1.0μm The groups of curves correspond to VGS equal to 0V, −1V, −2V, and −3V. (2b,c): Maximum current and average output conductance as functions of gate position. VGS=0V LG=1.0μm LGS+LGD=2.0μm

Figure 3

Figure 3:Calculated current vs. voltage characteristics for a scaled HFET device on Al2O3 (solid), GaN (dashed), AlN (dotted), and SiC (dashed-dotted) are shown. The curves correspond to VGS=0V. VT=−4.0, Rc=0.5Ωmm, LGS=LG=LGD=0.5μm.