Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T02:45:37.735Z Has data issue: false hasContentIssue false

Automatic Collection of Tilt and Strain Data from Tabular Icebergs

Published online by Cambridge University Press:  20 January 2017

Monica Kristensen
Affiliation:
Scott Polar Research Institute, University of Cambridge, Cambridge CB2 1 ER, England
Vernon A. Squire
Affiliation:
Scott Polar Research Institute, University of Cambridge, Cambridge CB2 1 ER, England
Rights & Permissions [Opens in a new window]

Abstract

Drift tracks of Antarctic tabular icebergs have been studied by means of satellite-tracked buoys since the early 1970s. More recently, a growing interest in the possibility of using Antarctic icebergs to supply fresh water to arid areas has made resources available for more sophisticated experiments, and in 1978 three prototype stations were designed to measure interactions between tabular icebergs and the ocean. These stations were deployed in late 1979, and in early 1981.

The purpose of this paper is, firstly, to communicate some of our experiences with an earlier type of automatic data collection platform, and, secondly, to show that the substantial amount of tilt and strain data available from this station is unsuitable for data analysis. We discuss aspects of the data collected by the first of the three automatic stations, paying particular attention to the quality of the recorded strain and tilt data. It is shown that an unfortunate choice of instrument sensitivity and range severely limits the usefulness of the collected data, and that limitations in the data sampling regime make data analysis by conventional statistical methods very difficult. Several changes are proposed for the design of future data collection platforms for tabular icebergs, and some suggestions are made about data sampling. As this paper only concerns iceberg research, we do not discuss investigations of sea-ice drift made in the same area.

Information

Type
Research Article
Copyright
Copyright © International Glaciological Society 1983
Figure 0

Fig. 1.Position of deployment and subsequent drift of platform ID 1080, placed on a tabular iceberg in the Weddell Sea area (after Orheim and others 1982).

Figure 1

Table 1.Sensor Performance On Automatic Data Collection Platform Id 1080

Figure 2

Fig. 2.Different sensors employed in the automatic stations, and their relative positions after deployment (after Bø and others 1979).

Figure 3

Fig. 3.Examples of short records of pitch, roll and strain. The magnitudes of the pitch and roll motions in this illustration are particularly large compared with most of the recorded data.

Figure 4

Fig. 4.Histograms showing distributions of RRPs of pitch, roll and strain motions for the period to 27 February 1979.

Figure 5

Fig. 5.PDFs for pitch, roll and strain for comparison with Gaussian distribution.

Figure 6

Fig. 6.Examples showing large tilt variations seen on two occasions during the life of station ID 1080. (a): an event occurs in both trends on 25 February.1979. (b): the tilt variations and the temperature records from sensors T3 and T4 frotfi 5 to 23 February 1980. (Figure redrawn from data obtained from Norsk Polarinstitutt, Oslo.)