Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T19:57:11.927Z Has data issue: false hasContentIssue false

MBE Growth of Nitride-Arsenide Materials for long Wavelength Opto-electronics

Published online by Cambridge University Press:  13 June 2014

Sylvia G. Spruytte
Affiliation:
Solid State and Photonics Lab, Stanford University, Stanford, CA 94305, U.S.A.
Christopher W. Coldren
Affiliation:
Solid State and Photonics Lab, Stanford University, Stanford, CA 94305, U.S.A.
Ann F. Marshall
Affiliation:
Center for Materials Research, Stanford University, Stanford, CA 94305, U.S.A.
Michael C. Larson
Affiliation:
Lawrence Livermore National Laboratory, P.O. Box 808, L-222, Livermore, CA. 94551, U.S.A.
James S. Harris
Affiliation:
Solid State and Photonics Lab, Stanford University, Stanford, CA 94305, U.S.A.

Abstract

Nitride-Arsenide materials were grown by molecular beam epitaxy (MBE) using a radio frequency (rf) nitrogen plasma. The plasma conditions that maximize the amount of atomic nitrogen versus molecular nitrogen were determined using the emission spectrum of the plasma. Under constant plasma source conditions and varying group III flux, the nitrogen concentration in the film is inversely proportional to the group III flux (i. e. the nitrogen sticking coefficient is unity). The relationship between nitrogen concentration in the film and lattice parameter of the film is not linear for nitrogen concentrations above 2.9 mole % GaN, indicating that some nitrogen is incorporated on other locations than the group V lattice sites. For films with these higher nitrogen concentrations, XPS indicates that the nitrogen exists in two configurations: a Gallium-Nitrogen bond and another type of nitrogen complex in which nitrogen is less strongly bonded to Gallium atoms. Annealing removes this nitrogen complex and allows some of the nitrogen to diffuse out of the film. Annealing also improves the crystal quality of GaAsN quantum wells.

Information

Type
Research Article
Copyright
Copyright © 1996 Materials Research Society
Figure 0

Figure 1.Emission spectrum of the rf nitrogen plasma for an nitrogen supply of 0.25 sccm and power of 300 W.

Figure 1

Figure 2.Concentration of nitrogen in GaNAs films as function of the GaAs growth rate. The nitrogen concentration was measured by HRXRD, SIMS, and electron microprobe analysis. The nitrogen plasma was operated with a power of 300 W and a nitrogen flow of 0.25 sccm.

Figure 2

Figure 3.Lattice parameter of different GaNAs films as function of nitrogen concentration The lattice parameter of the films was determined using HRXRD in a Philips Materials Research Diffractometer. The nitrogen concentration was measured by SIMS in an CAMECA IMS 4.5f instrument.

Figure 3

Figure 4.XPS signal from N(1s) peak from an annealed and an not annealed GaN0.06As0.94 film measured in an PHI 5800 instrument. The Gallium Auger peak around 398 eV was removed by dividing the obtained spectrum by the spectrum of a GaAs reference sample. Annealing was done for 30 seconds at 775°C in an AG heatpulse 310.

Figure 4

Figure 5.HRXRD rocking curve from an annealed and not annealed 6 period 70 Å GaN0.05As0.95/130 Å GaAs superlattice. Annealing was done for 10 seconds at 775°C in an AG heatpulse 310.