Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T00:50:21.511Z Has data issue: false hasContentIssue false

Composition of resolvents enhanced by random sweeping for large-scale structures in turbulent channel flows

Published online by Cambridge University Press:  07 February 2023

Ting Wu
Affiliation:
The State Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, PR ChinaSchool of Engineering Sciences, University of Chinese Academy of Sciences, Beijing 100049, PR China
Guowei He*
Affiliation:
The State Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, PR ChinaSchool of Engineering Sciences, University of Chinese Academy of Sciences, Beijing 100049, PR China
*
†Email address for correspondence: hgw@lnm.imech.ac.cn

Abstract

Composite sweeping-enhanced resolvents, referred to as the ${\boldsymbol {R}}_s^2$ model, are proposed to predict the space–time statistics of large-scale structures in turbulent channel flows. This model incorporates two key mechanisms: (i) eddy damping is introduced to represent random sweeping decorrelation caused by nonlinear forcing, leading to a sweeping-enhanced resolvent ${{\boldsymbol {R}}_s}$; and (ii) the sweeping-enhanced resolvent ${{\boldsymbol {R}}_s}$ is composited into its iterations ${\boldsymbol {R}}_s^2$ to yield non-zero Taylor time microscales. The resulting ${\boldsymbol {R}}_s^2$ model can correctly predict the frequency spectra and two-point cross-spectra of large-scale structures. This model is compared numerically with eddy-viscosity-enhanced resolvent models. The latter are designed to represent energy transfer instead for time decorrelation, and thus underpredict the characteristic decay time scales. The ${\boldsymbol {R}}_s^2$ model correctly yields the characteristic decay time scales in turbulent channel flows.

Information

Type
JFM Papers
Copyright
© The Author(s), 2023. Published by Cambridge University Press
Figure 0

Figure 1.Characteristic length scale ${\lambda _{y}}({\boldsymbol {k}},y)$ of the turbulent channel flows at ${\boldsymbol {k}}h = (2,4)$ for large-scale structures. (a) Plots for ${Re_\tau } = 180$, where the red solid line shows the DNS result, and the blue dashed line shows $0.075\sqrt {{h^2} - {y^2}}$. (b) Plots for ${Re_\tau } = 550$, where the red solid line shows the DNS result, and the blue dashed line shows $0.046\sqrt {{h^2} - {y^2}}$.

Figure 1

Table 1.Summary of the resolvent-based models used in the present study.

Figure 2

Figure 2.Frequency spectral distributions in the wall-normal direction, $\varPhi ({\boldsymbol {k}},\omega,y)/{\varPhi _I}({\boldsymbol {k}})$, at ${\boldsymbol {k}}h = (2,4)$ for large-scale structures at $Re_\tau = 180$: (a) DNS, (b) $\nu$ model, (c) B model, (d) W model, (e) $\lambda$ model, ( f) ${\boldsymbol {R}}_s^2$ model.

Figure 3

Figure 3.Frequency spectral distributions in the wall-normal direction, $\varPhi ({\boldsymbol {k}},\omega,y)/{\varPhi _I}({\boldsymbol {k}})$, at ${\boldsymbol {k}}h = (2,4)$ for large-scale structures at ${Re_\tau } = 550$: (a) DNS, (b) $\nu$ model, (c) B model, (d) W model, (e) $\lambda$ model, ( f) ${\boldsymbol {R}}_s^2$ model.

Figure 4

Figure 4.Hellinger distance ${d_H}({\boldsymbol {k}},y)$ at ${\boldsymbol {k}}h = (2,4)$ for large-scale structures: (a) ${Re_\tau } = 180$, (b) ${Re_\tau } = 550$.

Figure 5

Figure 5.Amplitude of the time correlations $|R({\boldsymbol {k}},\tau,y)|$ at ${\boldsymbol {k}}h = (2,4)$ for large-scale structures and at three wall-normal locations at ${Re_\tau } = 180$. Red solid lines, ${y^ + } = 180$; blue dashed lines, ${y^ + } = 50$; brown dash-dotted lines, ${y^ + } = 5$. (a) DNS, (b) $\nu$ model, (c) B model, (d) W model, (e) $\lambda$ model, ( f) ${\boldsymbol {R}}_s^2$ model.

Figure 6

Figure 6.Amplitude of the time correlations $|R({\boldsymbol {k}},\tau,y)|$ at ${\boldsymbol {k}}h = (2,4)$ for large-scale structures and at three wall-normal locations at ${Re_\tau } = 550$. Red solid lines, ${y^ + } = 550$; blue dashed lines, ${y^ + } = 92$; brown dash-dotted lines, ${y^ + } = 5$. (a) DNS, (b) $\nu$ model, (c) B model, (d) W model, (e) $\lambda$ model, ( f) ${\boldsymbol {R}}_s^2$ model.

Figure 7

Figure 7.Comparison of the characteristic decay time scales obtained by the resolvent-based models with the DNS at ${\boldsymbol {k}}h = (2,4)$ for ${Re_\tau } = 180$. Red solid lines, the DNS results; blue dashed lines, the results of the (a) $\nu$ model, (b) B model, (c) W model, (d) $\lambda$ model, and (e) ${\boldsymbol {R}}_s$ model; brown dash-dotted lines, the results of the (a) ${\nu ^2}$ model, (b) B$^2$ model, (c) W$^2$ model, (d) ${\lambda ^2}$ model, and (e) ${\boldsymbol {R}}_s^2$ model. The inset in (e) shows an enlarged view of the result of the ${\boldsymbol {R}}_s$ model.

Figure 8

Figure 8.Comparison of the characteristic decay time scales obtained by the resolvent-based models with the DNS at ${\boldsymbol {k}}h = (2,4)$ for ${Re_\tau } = 550$. Red solid lines, the DNS results; blue dashed lines, the results of the (a) $\nu$ model, (b) B model, (c) W model, (d) $\lambda$ model, and (e) ${\boldsymbol {R}}_s$ model; brown dash-dotted lines, the results of the (a) ${\nu ^2}$ model, (b) B$^2$ model, (c) W$^2$ model, (d) ${\lambda ^2}$ model, and (e) ${\boldsymbol {R}}_s^2$ model. The inset in (e) shows an enlarged view of the result of the ${\boldsymbol {R}}_s$ model.

Figure 9

Figure 9.Comparison of the Taylor time microscales ${\lambda _T}({\boldsymbol {k}},y)$ from the ${\boldsymbol {R}}_s^2$ model with the DNS results at ${\boldsymbol {k}}h = (2,4)$. Red solid lines, the DNS results; blue dashed lines, the results of the ${\boldsymbol {R}}_s^2$ model. Plots for (a) ${Re_\tau } = 180$, (b) ${Re_\tau } = 550$.

Figure 10

Figure 10.Comparison of the integral time scales ${T_I}$ from the ${\boldsymbol {R}}_s^2$ model with the DNS results at ${\boldsymbol {k}}h = (2,4)$. Red solid lines, the DNS results; blue dashed lines, the results of the ${\boldsymbol {R}}_s^2$ model. Plots for (a) ${Re_\tau } = 180$, (b) ${Re_\tau } = 550$.

Figure 11

Figure 11.Amplitude of the cross-spectral distribution $|\varPhi ({\boldsymbol {k}},{\omega _p},y,y')|/{\varPhi _I} ({\boldsymbol {k}})$ of the streamwise velocity modes at ${\boldsymbol {k}}h = (2,4)$ for large-scale structures and the peak frequency ${\omega _p}h/{U_b} = 2.1$ for ${Re_\tau } = 180$: (a) DNS, (b) $\nu$ model, (c) B model, (d) W model, (e) $\lambda$ model, ( f) ${\boldsymbol {R}}_s^2$ model.

Figure 12

Figure 12.Amplitude of the cross-spectral distribution $|\varPhi ({\boldsymbol {k}},{\omega _p},y,y')|/{\varPhi _I} ({\boldsymbol {k}})$ of the streamwise velocity modes at ${\boldsymbol {k}}h = (2,4)$ for large-scale structures and the peak frequency ${\omega _p}h/{U_b} = 2$ for ${Re_\tau } = 550$: (a) DNS, (b) $\nu$ model, (c) B model, (d) W model, (e) $\lambda$ model, ( f) ${\boldsymbol {R}}_s^2$ model.

Figure 13

Figure 13.Errors ${E_c}({\boldsymbol {k}},{\omega _p},y)$ in the cross-spectral distributions obtained by different models relative to the DNS results at ${\boldsymbol {k}}h = (2,4)$: (a) ${Re_\tau } = 180$, (b) ${Re_\tau } = 550$. Two vertical lines are shown at $|y/h| = 0.63$ to indicate the peaks of the cross-spectral distributions.

Figure 14

Figure 14.Frequency spectral distributions at (a,c) ${\boldsymbol {k}}h = (1,2)$ and (b,d) ${\boldsymbol {k}}h = (4,8)$ in the turbulent channel flows at ${Re_\tau } = 180$: (a,b) DNS results; (c,d) Results of the ${\boldsymbol {R}}_s^2$ model.

Figure 15

Figure 15.Frequency spectral distributions at (a,c) ${\boldsymbol {k}}h = (1,2)$ and (b,d) ${\boldsymbol {k}}h = (4,8)$ in the turbulent channel flows at ${Re_\tau } = 550$: (a,b) DNS results; (c,d) Results of the ${\boldsymbol {R}}_s^2$ model.

Figure 16

Figure 16.Comparison of the characteristic decay time scales obtained using the ${\boldsymbol {R}}_s^2$ model with the DNS at (a) ${\boldsymbol {k}}h = (1,2)$ and (b) ${\boldsymbol {k}}h = (4,8)$ for ${Re_\tau } = 180$. Red solid lines: the DNS results. Blue dashed lines: the results of the ${\boldsymbol {R}}_s^2$ model.

Figure 17

Figure 17.Comparison of the characteristic decay time scales obtained using the ${\boldsymbol {R}}_s^2$ model with the DNS at (a) ${\boldsymbol {k}}h = (1,2)$ and (b) ${\boldsymbol {k}}h = (4,8)$ for ${Re_\tau } = 550$. Red solid lines: the DNS results. Blue dashed lines: the results of the ${\boldsymbol {R}}_s^2$ model.

Figure 18

Figure 18.Frequency spectral distributions using the models at ${\boldsymbol {k}}h = (2,4)$ for large-scale structures at ${Re_\tau } = 1000$: (a) $\nu$ model, (b) B model, (c) W model, (d) $\lambda$ model, (e) ${\boldsymbol {R}}_s^2$ model.

Figure 19

Figure 19.Characteristic decay time scales obtained using the models at ${\boldsymbol {k}}h = (2,4)$ for large-scale structures at ${Re_\tau } = 1000$: (a) $\nu$ model, (b) B model, (c) W model, (d) $\lambda$ model, (e) ${\boldsymbol {R}}_s^2$ model.

Figure 20

Figure 20.Frequency spectral distributions of the spanwise velocity fluctuations at ${Re_\tau } = 180$: (a–c) DNS results; (d–f) results of the ${\boldsymbol {R}}_s^2$ model. Plots for (a,d) ${\boldsymbol {k}}h = (1,2)$, (b,e) ${\boldsymbol {k}}h = (2,4)$, (c, f) ${\boldsymbol {k}}h = (4,8)$.

Figure 21

Figure 21.Frequency spectral distributions of the spanwise velocity fluctuations at ${Re_\tau } = 550$: (a–c) DNS results; (d–f) results of the ${\boldsymbol {R}}_s^2$ model. Plots for (a,d) ${\boldsymbol {k}}h = (1,2)$, (b,e) ${\boldsymbol {k}}h = (2,4)$, (c, f) ${\boldsymbol {k}}h = (4,8)$.

Figure 22

Figure 22.Frequency spectral distributions of the wall-normal velocity fluctuations at ${Re_\tau } = 180$: (a–c) DNS results; (d–f) results of the ${\boldsymbol {R}}_s^2$ model. Plots for (a,d) ${\boldsymbol {k}}h = (1,2)$, (b,e) ${\boldsymbol {k}}h = (2,4)$, (c, f) ${\boldsymbol {k}}h = (4,8)$.

Figure 23

Figure 23.Frequency spectral distributions of the wall-normal velocity fluctuations at ${Re_\tau } = 550$: (a–c) DNS results; (d–f) results of the ${\boldsymbol {R}}_s^2$ model. Plots for (a,d) ${\boldsymbol {k}}h = (1,2)$, (b,e) ${\boldsymbol {k}}h = (2,4)$, (c, f) ${\boldsymbol {k}}h = (4,8)$.

Figure 24

Figure 24.Comparison of the characteristic decay time scales of the spanwise velocity fluctuations obtained using the ${\boldsymbol {R}}_s^2$ model with the DNS at ${Re_\tau } = 180$. Red solid lines, the DNS results; blue dashed lines, the results of the ${\boldsymbol {R}}_s^2$ model. Plots for (a) ${\boldsymbol {k}}h = (1,2)$, (b) ${\boldsymbol {k}}h = (2,4)$, (c) ${\boldsymbol {k}}h = (4,8)$.

Figure 25

Figure 25.Comparison of the characteristic decay time scales of the spanwise velocity fluctuations obtained using the ${\boldsymbol {R}}_s^2$ model with the DNS at ${Re_\tau } = 550$. Red solid lines, the DNS results; blue dashed lines, the results of the ${\boldsymbol {R}}_s^2$ model. Plots for (a) ${\boldsymbol {k}}h = (1,2)$, (b) ${\boldsymbol {k}}h = (2,4)$, (c) ${\boldsymbol {k}}h = (4,8)$.

Figure 26

Figure 26.Comparison of the characteristic decay time scales of the wall-normal velocity fluctuations obtained using the ${\boldsymbol {R}}_s^2$ model with the DNS at ${Re_\tau } = 180$. Red solid lines, the DNS results; blue dashed lines, the results of the ${\boldsymbol {R}}_s^2$ model. Plots for (a) ${\boldsymbol {k}}h = (1,2)$, (b) ${\boldsymbol {k}}h = (2,4)$, (c) ${\boldsymbol {k}}h = (4,8)$.

Figure 27

Figure 27.Comparison of the characteristic decay time scales of the wall-normal velocity fluctuations obtained using the ${\boldsymbol {R}}_s^2$ model with the DNS at ${Re_\tau } = 550$. Red solid lines, the DNS results; blue dashed lines, the results of the ${\boldsymbol {R}}_s^2$ model. Plots for (a) ${\boldsymbol {k}}h = (1,2)$, (b) ${\boldsymbol {k}}h = (2,4)$, (c) ${\boldsymbol {k}}h = (4,8)$.