Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T22:49:19.341Z Has data issue: false hasContentIssue false

Photoelectrochemical Etching of InxGa1−xN

Published online by Cambridge University Press:  13 June 2014

Hyun Cho
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville FL 32611
S.M. Donovan
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville FL 32611
C.R. Abernathy
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville FL 32611
S.J. Pearton
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville FL 32611
F. Ren
Affiliation:
Department of Chemical Engineering, University of Florida, Gainesville FL 32611
J. Han
Affiliation:
Sandia National Laboratories, Albuquerque NM 87185
R.J. Shul
Affiliation:
Sandia National Laboratories, Albuquerque NM 87185

Abstract

A comparison of KOH, NaOH and AZ400K solutions for UV photo-assisted etching of undoped and n+ GaN is discussed. The etching is diffusion-limited (Ea < 6kCal·mol−1) under all conditions and is significantly faster with bias applied to the sample during light exposure. No etching of InN was observed, due to the very high n-type background doping (> 1020cm−3) in the material.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Figure 1.Temperature dependence of GaN PEC etch rate either with or without 1.5V bias in different molarity (0.05 or 0.1M) KOH solutions.

Figure 1

Figure 2.Arrhenius plot of GaN PEC etch rate either with or without 1.5V bias in different molarity (0.05 or 0.1M) KOH solutions.

Figure 2

Figure 3.Normalized surface roughness (control has a value of 1) of PEC etched undoped or n+ GaN in KOH solutions at 25 °C as a function of solution molarity.

Figure 3

Figure 4.Etch rate of undoped or n+ GaN either with or without 1.5V bias in NaOH solutions at 25°C as a function of solution molarity.

Figure 4

Figure 5.Temperature dependence of GaN PEC etch rate either with or without 1.5V bias in different molarity (0.05 or 0.1M) NaOH solutions.

Figure 5

Figure 6.Arrhenius plot of GaN PEC etch rate either with or without 1.5V bias in different molarity (0.05 or 0.1M) KOH solutions.

Figure 6

Figure 7.SEM micrograph of features etched into GaN with 1.5V bias using a Ti mask and 0.02M NaOH solution.

Figure 7

Figure 8.Temperature dependence of GaN PEC etch rate either with or without 1.5V bias in H2O:AZ400K solutions.

Figure 8

Figure 9.Arrhenius plot of GaN PEC etch rate either with or without 1.5V bias in H2O:AZ400K solutions