Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T03:11:43.433Z Has data issue: false hasContentIssue false

Wavy Marangoni effect and strategic slip-pattern-driven species transport in micro-confined sandwiched liquid films

Published online by Cambridge University Press:  06 December 2023

Shubham Agrawal
Affiliation:
Hydrodynamics and Thermal Multiphysics Lab (HTML), Department of Mechanical Engineering, Indian Institute of Technology Kharagpur, West Bengal 721302, India
Prasanta Kumar Das*
Affiliation:
Department of Mechanical Engineering, Indian Institute of Technology Kharagpur, West Bengal 721302, India
Purbarun Dhar*
Affiliation:
Hydrodynamics and Thermal Multiphysics Lab (HTML), Department of Mechanical Engineering, Indian Institute of Technology Kharagpur, West Bengal 721302, IndiaDepartment of Mechanical Engineering, Indian Institute of Technology Kharagpur, West Bengal 721302, India
*
† Email addresses for correspondence: purbarun@mech.iitkgp.ac.in, pkd@mech.iitkgp.ac.in
† Email addresses for correspondence: purbarun@mech.iitkgp.ac.in, pkd@mech.iitkgp.ac.in

Abstract

In microfluidic systems, analyte/reagent mixing is essential to achieve rapid chemical/biochemical reactions. The low Reynolds number (Re) flow, however, makes passive mixing difficult and necessitates the use of some external stimulus to cause disturbance in the system. Here, we report how a periodic thermocapillary effect may interact with strategically patterned wall wettability and boost the mixing dynamics in a micro-confined ternary-liquid film system. Approximate, yet without compromise on the physics involved, analytical solutions to the energy and Navier–Stokes equations under creeping flow conditions are obtained to comprehend the thermal and hydrodynamic characteristics of the thermo-capillarity. In the binary fluid limit, our model is validated with the findings of Pendse & Esmaeeli (Intl J. Therm. Sci., vol. 49, 2010, pp. 1147–1155), and good agreement is found. The flow characteristics in the ternary-liquid system due to discrete wall temperatures is also demonstrated via finite-element-based numerical simulations, and agreement with the semi-analytical solution is noted. The qualitative study of the flow pattern reveals that enhanced mixing is obtained as a result of vortical motion created by the interplay of the periodic thermo-capillarity-driven interfacial flow and wall slip. The observation is further consolidated from the numerical simulation of the species transport equation. The species distribution so obtained is compared with fully developed laminar flow for the same inlet concentration. Our study further investigates the effects of the fluids’ relative thermal conductivity, wall slip length, relative film thickness and thermal (or slip) phase differences on the mixing efficiency of the proposed arrangement. While wall slip, relative film thickness and relative thermal conductivity regulate mixing in the top and bottom layers, phase difference determines how well the middle fluid layer mixes. Slip at the walls creates vortex distortions to get a strong churning effect. The lower thermal conductivity of the top and bottom fluids weakens the thermocapillary flow; however, the dominance of the patterned slip improves mixing in such cases.

Information

Type
JFM Papers
Copyright
© The Author(s), 2023. Published by Cambridge University Press
Figure 0

Table 1.Details of immiscible ternary-liquid system.

Figure 1

Figure 1.The ternary-liquid layers in a micro-conduit with periodic thermal stimuli applied at the channel walls. Here, coordinate axes $\bar{x}$ and $\bar{y}$ represent the axial and the lateral directions of the microchannel, respectively, and $\bar{a},\bar{b},\bar{c}$ denote the thicknesses of the fluid layers. The expressions for wall temperature and slip velocities are shown in the figure.

Figure 2

Table 2.Modified boundary conditions for the temperature field.

Figure 3

Table 3.Expressions for different terms of the temperature field.

Figure 4

Table 4.General forms for the different terms of the streamfunction.

Figure 5

Table 5.The term-wise governing differential equations of the streamfunction.

Figure 6

Table 6.Boundary conditions available to solve species transport equation.

Figure 7

Figure 2.Validation of the mathematical formulations made in the present study for (a) the thermal, (b) the hydrodynamic and (c) the species transport analysis.

Figure 8

Figure 3.Thermal contours in the microchannel for different values of the phase difference between the wall thermal stimuli: (a) $\theta = 0$, (b) $\theta = {\rm \pi}/2$ and (c) $\theta = {\rm \pi}$. Here, $T = (\bar{T} - \overline {{T_{min}}} )/(\overline {{T_{max}}} - \overline {{T_{min}}} )$. Parametric detail: $\overline {{T_l}} = 300\ \textrm{K},\overline {{T_u}} = 310\ \textrm{K},\alpha = 2{\rm \pi} ,$ $a:b:c = 1:1:1,{\lambda _a}:{\lambda _b}:{\lambda _c} = 1:1:1\ \textrm{and}\ {\delta _l} = {\delta _u} = 0.1$.

Figure 9

Figure 4.Interfacial temperatures for the ternary-liquid system for different values of the phase difference between the wall thermal stimuli at (a) the upper interface and (b) the lower interface. Here, $T = (\bar{T} - \overline {{T_{min}}} )/(\overline {{T_{max}}} - \overline {{T_{min}}} )$. Parametric detail: $\overline {{T_l}} = 300\ \textrm{K},\overline {{T_u}} = 310\ \textrm{K},\alpha = 2{\rm \pi} ,$ $a:b:c = 1:1:1,{\lambda _a}:{\lambda _b}:{\lambda _c} = 1:1:1\ \textrm{and}\ {\delta _l} = {\delta _u} = 0.1$.

Figure 10

Figure 5.Streamfunction distribution in the microchannel, and its dependence on the phase difference and wall slip. Here, $\psi = (\bar{\psi } - \overline {{\psi _{min}}} )/(\overline {{\psi _{max}}} - \overline {{\psi _{min}}} )$. Parametric detail: $\overline {{T_l}} = 300\ \textrm{K},\overline {{T_u}} = 310\ \textrm{K},\alpha = 2{\rm \pi} ,a:b:c $ $= 1:1:1,{\lambda _a}:{\lambda _b}:{\lambda _c} = 1:1:1,{\sigma _T} ={-} {10^{ - 4}}\ \textrm{N}\ \textrm{m}{\textrm{K}^{ - 1}},$ ${\mu _a}:{\mu _b}:{\mu _c} = 1:1:1,\mathrm{\epsilon } = {10^{ - 3}}\ \textrm{and}\ {\delta _l} = {\delta _u} = 0.1$.

Figure 11

Figure 6.Streamfunction distribution in the microchannel, and its dependence on the film thickness ratio of the three liquid layers and wall slip conditions. Here, $\psi = (\bar{\psi } - \overline {{\psi _{min}}} )/(\overline {{\psi _{max}}} - \overline {{\psi _{min}}} )$. Parametric detail: $\overline {{T_l}} = 300\ \textrm{K},\overline {{T_u}} = 310\ \textrm{K},\alpha = 2{\rm \pi} ,$ $\theta = {\rm \pi}/2,{\lambda _a}:{\lambda _b}:{\lambda _c} = 1:1:1,{\sigma _T} ={-} {10^{ - 4}}\ \textrm{N}\ \textrm{m}{\textrm{K}^{ - 1}},$ ${\mu _a}:{\mu _b}:{\mu _c} = 1:1:1,\mathrm{\epsilon } = {10^{ - 3}}\ \textrm{and}\ {\delta _l} = {\delta _u} = 0.1$.

Figure 12

Figure 7.Interfacial velocity profiles and their dependence on the film thickness ratio of the three liquid layers and wall slip conditions: (a) upper interface and (b) lower interface. Here, $U = \bar{u}/\overline {{U_{max}}}$. Parametric detail: ${\mu _a}:{\mu _b}:{\mu _c} = 1:1:1,\mathrm{\epsilon } = {10^{ - 3}}\ \textrm{and}\ {\delta _l} = {\delta _u} = 0.1$ ${\mu _a}:{\mu _b}:{\mu _c} = 1:1:1,\mathrm{\epsilon } = {10^{ - 3}}\ \textrm{and}\ {\delta _l} = {\delta _u} = 0.1$.

Figure 13

Figure 8.Streamfunction distribution in the microchannel, and its dependence on the thermal conductivity ratio of the three liquid layers and wall slip conditions. Here, $\psi = (\bar{\psi } - \overline {{\psi _{min}}} )/(\overline {{\psi _{max}}} - \overline {{\psi _{min}}} )$. Parametric detail: $\overline {{T_l}} = 300\ \textrm{K},\overline {{T_u}} = 310\ \textrm{K},\alpha = 2{\rm \pi} ,\theta = {\rm \pi} /2,a:b:c$ $= 1:1:1,{\sigma _T} ={-} {10^{ - 4}}\ \textrm{N}\ \textrm{m}{\textrm{K}^{ - 1}},{\mu _a}:{\mu _b}:{\mu _c}$ $= 1:1:1,\mathrm{\epsilon } = {10^{ - 3}}\ \textrm{and}\ {\delta _l} = {\delta _u} = 0.1$.

Figure 14

Figure 9.Interfacial velocity profiles and its dependence on the relative thermal conductivity of the three liquid layers and wall slip conditions: (a) upper interface and (b) lower interface. Here, $U = \bar{u}/\overline {{U_{max}}} $. Parametric detail: $\overline {{T_l}} = 300\ \textrm{K},\overline {{T_u}} = 310\ \textrm{K},\alpha = 2{\rm \pi} ,\theta$ $= {\rm \pi}/2,a:b:c = 1:1:1,{\sigma _T} ={-} {10^{ - 4}}\ \textrm{N}\ \textrm{m}{\textrm{K}^{ - 1}},$ ${\mu _a}:{\mu _b}:{\mu _c} = 1:1:1,\mathrm{\epsilon } = {10^{ - 3}}\ \textrm{and}\ {\delta _l} = {\delta _u} = 0.1$.

Figure 15

Figure 10.Streamfunction distribution in the microchannel, and its dependence on the phase difference $(\theta )$ and wall slip conditions in a binary-liquid system. Here, $\psi = (\bar{\psi } - \overline {{\psi _{min}}} )/(\overline {{\psi _{max}}} - \overline {{\psi _{min}}} )$. Parametric detail: $\overline {{T_l}} = 300\ \textrm{K},\overline {{T_u}} = 310\ \textrm{K},\alpha = 2{\rm \pi} ,a:c$ $= 1:1,{\lambda _a}:{\lambda _c} = 1:1,{\sigma _T} ={-} {10^{ - 4}}\ \textrm{N}\ \textrm{m}{\textrm{K}^{ - 1}},$ ${\mu _a}:{\mu _c} = 1:1,\mathrm{\epsilon } = {10^{ - 3}}\ \textrm{and}\ {\delta _l} = {\delta _u} = 0.1$.

Figure 16

Figure 11.Streamfunction distribution in the microchannel, and its dependence on the film thickness ratio $(a:c)$ and wall slip conditions in a binary-liquid system. Here, $\psi = (\bar{\psi } - \overline {{\psi _{min}}} )/(\overline {{\psi _{max}}} - \overline {{\psi _{min}}} )$. Parametric detail: $\overline {{T_l}} = 300\ \textrm{K},\overline {{T_u}} = 310\ \textrm{K},\alpha = 2{\rm \pi} ,\theta = {\rm \pi}/2,a:c = 1:1,{\sigma _T}$ $={-} {10^{ - 4}}\ \textrm{N}\ \textrm{m}{\textrm{K}^{ - 1}},{\mu _a}:{\mu _c} = 1:1,\mathrm{\epsilon } = {10^{ - 3}}\ \textrm{and}\ {\delta _l} = {\delta _u} = 0.1$.

Figure 17

Figure 12.Streamfunction distribution in the microchannel, and its dependence on the relative thermal conductivity of the participating fluids $({\lambda _a}:{\lambda _c})$ and wall slip conditions in a binary-liquid system. Here, $\psi = (\bar{\psi } - \overline {{\psi _{min}}} )/(\overline {{\psi _{max}}} - \overline {{\psi _{min}}} )$. Parametric detail: $\overline {{T_l}} = 300\ \textrm{K},\overline {{T_u}} = 310\ \textrm{K},\alpha = 2{\rm \pi} ,\theta = {\rm \pi}/2,{\lambda _a}:{\lambda _c} = 1:1,{\sigma _T}$ $={-} {10^{ - 4}}\ \textrm{N}\ \textrm{m}{\textrm{K}^{ - 1}},{\mu _a}:{\mu _c} = 1:1,\mathrm{\epsilon } = {10^{ - 3}}\ \textrm{and}\ {\delta _l} = {\delta _u} = 0.1$.

Figure 18

Figure 13.Interfacial deformation and its dependence on the relative film thickness of the three liquid layers and wall slip conditions: (a) upper interface and (b) lower interface. Here, ${y_i} = {\bar{y}_i}/\overline {{l_c}}$, where $i = l,u$. Parametric detail: $\overline {{T_l}} = 300\ \textrm{K},\overline {{T_u}} = 310\ \textrm{K},\alpha = 2{\rm \pi} ,\theta = {\rm \pi}/2,{\lambda _a}:{\lambda _b}:{\lambda _c}$ $= 1:1:1,{\sigma _T} ={-} {10^{ - 4}}\ \textrm{N}\ \textrm{m}{\textrm{K}^{ - 1}},{\mu _a}:{\mu _b}:{\mu _c}$ $= 1:1:1,\mathrm{\epsilon } = {10^{ - 3}}\ \textrm{and}\ {\delta _l} = {\delta _u} = 0.1$.

Figure 19

Figure 14.Comparison of the steady-state species distribution in a fully developed laminar flow and the Marangoni flow. Here, $C = (\bar{C} - \overline {{C_{min}}} )/(\overline {{C_{max}}} - \overline {{C_{min}}} )$. Other parametric detail: $\overline {{T_l}} = 300\ \textrm{K},\overline {{T_u}} = 310\ \textrm{K},\alpha = 2{\rm \pi} ,\theta = {\rm \pi}/2,a:b:c = 1:1:1,{\lambda _a}:{\lambda _b}:{\lambda _c}$ $= 1:1:1,{\sigma _T} ={-} {10^{ - 4}}\ \textrm{N}\ \textrm{m}{\textrm{K}^{ - 1}},{\mu _a}:{\mu _b}:{\mu _c} = 1:1:1,{l_s}$ $= 0.1,\mathrm{\epsilon } = {10^{ - 3}}\ \textrm{and}\ {\delta _l} = {\delta _u} = 0.1$.

Figure 20

Figure 15.Species concentration distribution in the middle liquid layer across the microchannel length at different axial locations. Here, $\bar{x}$ is in μm, ${y^\ast } = \bar{y}/\bar{b}$ and $C = (\bar{C} - \overline {{C_{min}}} )/(\overline {{C_{max}}} - \overline {{C_{min}}} )$. Other parametric detail: $\overline {{T_l}} = 300\ \textrm{K},\overline {{T_u}} = 310\ \textrm{K},\alpha = 2{\rm \pi} ,\theta = {\rm \pi}/2,a:b:c = 1:1:1,{\lambda _a}:{\lambda _b}:{\lambda _c} $ $= 1:1:1,{\sigma _T} ={-} {10^{ - 4}}\ \textrm{N}\ \textrm{m}{\textrm{K}^{ - 1}},{\mu _a}:{\mu _b}:{\mu _c}$ $= 1:1:1,{l_s} = 0.1,\mathrm{\epsilon } = {10^{ - 3}}\ \textrm{and}\ {\delta _l} = {\delta _u} = 0.1$.

Figure 21

Figure 16.Validation of the mathematical formulations with the numerical simulations: (a) thermal result, (b) hydrodynamic result. Parametric detail: $\overline {{T_l}} = \overline {{T_u}} = 300\ \textrm{K},{\delta _l} = {\delta _u} = 0.1,\alpha = 2{\rm \pi} ,\theta = 0,x = 0.3$.

Figure 22

Figure 17.Velocity contours in the ternary-liquid system for the discrete wall temperature conditions, obtained from numerical solutions. The colour bar shown is in logarithmic scale. Parametric detail: bottom and top layers are kerosene oil, middle layer is water, $\overline {{T_l}} = 300\ \textrm{K},\overline {{T_u}} = \left\{{\begin{array}{@{}c} {340\ \textrm{K}\ \textrm{for}\ N + 0.75 < x < N + 1.25}\\ {315 \ \textrm{K}\ \textrm{for}\ N + 0.25 < x < N + 0.75} \end{array}} \right.\!\!\!\!.$

Figure 23

Figure 18.Interfacial temperatures of the ternary-liquid system for the discrete wall temperature conditions: (a) the upper interface and (b) the lower interface. Here, $T = (\bar{T} - \overline {{T_{min}}} )/(\overline {{T_{max}}} - \overline {{T_{min}}} )$. Parametric detail: bottom and top layers are kerosene oil, middle layer is water, $\overline {{T_l}} = 300\ \textrm{K}, \overline {{T_u}} = \left\{ {\begin{array}{@{}c} {340\ \textrm{K}\ \textrm{for}\ N + 0.75 < x < N + 1.25}\\ {315\ \textrm{K}\ \textrm{for}\ N + 0.25 < x < N + 0.75} \end{array}} \right.\!\!\!\!.$

Figure 24

Figure 19.Interfacial velocities of the ternary-liquid system for the discrete wall temperature conditions: (a) the upper interface and (b) the lower interface. Here, $U = \bar{u}/\overline {{U_{max}}} $. Parametric detail: bottom and top layers are kerosene oil, middle layer is water, $\overline {{T_l}} = 300\ \textrm{K},\overline {{T_u}} = \left\{ {\begin{array}{@{}c} {340\ \textrm{K}\ \textrm{for}\ N + 0.75 < x < N + 1.25}\\ {315\ \textrm{K}\ \textrm{for}\ N + 0.25 < x < N + 0.75} \end{array}} \right.\!\!\!\!.$

Figure 25

Figure 20.Species concentration distribution in the middle liquid layer: (a) contour plot of C, (b) transverse variation of C at different axial locations. Here, ${x^\ast } = \bar{x}/\bar{b}$, ${y^\ast } = \bar{y}/\bar{b}$ and $C = (\bar{C} - \overline {{C_{min}}} )/(\overline {{C_{max}}} - \overline {{C_{min}}} )$. Parametric detail: bottom and top layers are kerosene oil, middle layer is water, $\overline {{T_l}} = 300\ \textrm{K}, \overline {{T_u}} = \left\{ {\begin{array}{@{}c@{}} {340\ \textrm{K}\ \textrm{for}\ N + 0.75 < x < N + 1.25}\\ {315\ \textrm{K}\ \textrm{for}\ N + 0.25 < x < N + 0.75} \end{array}} \right.$.

Figure 26

Table 7.The boundary conditions to obtain solutions for $g_j^i(\kern0.7pt y)$.

Figure 27

Table 8.The boundary conditions to obtain solutions for $h_j^i(\kern0.7pt y)$.