Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T02:11:20.948Z Has data issue: false hasContentIssue false

Wet Etching of Ion-implanted GaN Crystals by AZ-400K Photoresist

Published online by Cambridge University Press:  13 June 2014

C.A. Carosella
Affiliation:
Naval Research Laboratory, Washington DC 20375
B. Molnar
Affiliation:
Naval Research Laboratory, Washington DC 20375
S. Schiestel
Affiliation:
George Washington University, Washington, DC
J.A. Sprague
Affiliation:
Naval Research Laboratory, Washington DC 20375

Abstract

The photoresist developer AZ-400K, commonly used to remove AlN encapsulant layers on GaN crystalline films, is found to also etch certain as-grown GaN films. Even as-grown GaN films, which can not be etched in AZ-400K, however can be etched if amorphized by ion implantation. Etch rates of as high as 450 Å/min. were observed. The etching proceeds linearly in GaN in the first few minutes to a depth corresponding to the depth of the amorphous region. Subsequently, the etching rate saturates. Annealing of the highly amorphized samples up to 1000°C for one minute in a N2/H2 gas mixture does not reduce the etch rate, but for lower doses we observed a reduction of the etch rate. Observations of etching depth under various ion-implanted conditions could be correlated with the number of displacements per atoms (dpa) required for amorphization.

Information

Type
Research Article
Copyright
Copyright © 1996 Materials Research Society
Figure 0

Table 1:Different types of GaN samples used for etching experiments in AZ-400K, and their etching behavior.

Figure 1

Fig.1:Dependence of etching depth on etching time for the implantation of 100 keV Ar ions at different ion doses.

Figure 2

Fig.2:Damage calculations for the implantation of 100 keV Ar ions at different ion doses. The dpa to amorphize GaN is the approximate threshold from references [11] and [13].

Figure 3

Fig.3:Dependence of etching depth on etching time for different Ar ion energies.

Figure 4

Fig.4:SEM and profilometer scan of ion implanted and etched GaN