Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T15:23:09.786Z Has data issue: false hasContentIssue false

Formation of corner waves in the wake of a partially submerged bluff body

Published online by Cambridge University Press:  21 April 2015

P. Martínez-Legazpi
Affiliation:
Fluid Mechanics Group, Universidad Carlos III de Madrid, 28911 Leganés, Spain
J. Rodríguez-Rodríguez*
Affiliation:
Fluid Mechanics Group, Universidad Carlos III de Madrid, 28911 Leganés, Spain
A. Korobkin
Affiliation:
School of Mathematics, University of East Anglia, Norwich NR4 7TJ, UK
J. C. Lasheras
Affiliation:
Department of Mechanical and Aerospace Engineering, University of California, San Diego, La Jolla, CA 92093-0411, USA
*
†Email address for correspondence: javier.rodriguez@uc3m.es

Abstract

We study theoretically and numerically the downstream flow near the corner of a bluff body partially submerged at a deadrise depth ${\rm\Delta}h$ into a uniform stream of velocity $U$ , in the presence of gravity, $g$ . When the Froude number, $\mathit{Fr}=U/\sqrt{g{\rm\Delta}h}$ , is large, a three-dimensional steady plunging wave, which is referred to as a corner wave, forms near the corner, developing downstream in a similar way to a two-dimensional plunging wave evolving in time. We have performed an asymptotic analysis of the flow near this corner to describe the wave’s initial evolution and to clarify the physical mechanism that leads to its formation. Using the two-dimensions-plus-time approximation, the problem reduces to one similar to dam-break flow with a wet bed in front of the dam. The analysis shows that, at leading order, the problem admits a self-similar formulation when the size of the wave is small compared with the height difference ${\rm\Delta}h$ . The essential feature of the self-similar solution is the formation of a mushroom-shaped jet from which two smaller lateral jets stem. However, numerical simulations show that this self-similar solution is questionable from the physical point of view, as the two lateral jets plunge onto the free surface, leading to a self-intersecting flow. The physical mechanism leading to the formation of the mushroom-shaped structure is discussed.

Information

Type
Papers
Copyright
© 2015 Cambridge University Press 
Figure 0

Figure 1.(a) Wake structure downstream from the stern of a dummy ship model for large $\mathit{Fr}$ numbers (courtesy of Drazen et al.2010). (b) Corner wave developing downstream from the corner of a plate in a finite-width recirculating water channel (see Martínez-Legazpi 2011 for experimental details). Interestingly, even though immediately downstream from the plate the flow does not correspond to our idealized model (which, strictly speaking, only applies to an infinitely long prismatic bar), still at intermediate distances the same wave pattern is observed. (c) Sketch of the flow configuration.

Figure 1

Figure 2.Sketch of the boundary conditions used to solve the leading order of the outer potential, ${\it\phi}^{(1)}$ ((3.9) and (3.10)).

Figure 2

Figure 3.(a) Rescaled free surface near the corner at the time steps corresponding to the symbols in figure 4(a) (black curves). The yellow (online)/lighter (in print) curve denotes the last time step of the simulation before the lateral jets impact onto the free surface. In this figure, $({\it\xi},{\it\eta})=(y,z)/t^{3/2}$ are rescaled Cartesian coordinates. (b) Snapshots of the jet at different time steps (with ${\rm\Delta}t\approx 0.03$ between them), with the uppermost one corresponding to the yellow/lighter curve in (a). Notice that the tips of the jetlets always move forward in a fixed reference frame, but backwards with respect to the base of the jet, which causes the overturning.

Figure 3

Figure 4.(a) Time-marching numerical evolution of the rescaled radial coordinate of the free surface, $r_{tip}/t^{3/2}$ (black circles), and the rescaled potential, ${\it\phi}_{tip}/t^{2}$ (red squares), at the tip of the jet (${\it\theta}=-{\rm\pi}/4$). The solid lines correspond to the asymptotic values of these magnitudes computed using (3.14) (black) and (3.13) (yellow (online)/lighter (in print)) respectively. (b) Far-field behaviour of the numerical solution (yellow (online)/lighter (in print)) compared with the asymptotic solution of the self-similar problem (black dashed line), ${\it\eta}=(1/3){\it\xi}^{-1/3}$. The yellow/lighter curve corresponds to the last time step of the simulation, shown also in red in figure 3(a). (c) Normal derivative of the modified velocity potential, $S$, at the free surface as a function of the arc-length parameter, $s$. The self-similar condition $\partial _{n}S=0$ is fulfilled fairly well, except in the region dominated by the jetlet, corresponding to the range between $s\approx 1$ and $s\approx 5$.

Figure 4

Figure 5.Top view of the flow downstream from a partially submerged plate, an experimental approximation to the studied problem. Two surface waves, A and B, remain attached to the corner of the plate (Martínez-Legazpi 2011).

Figure 5

Figure 6.(a) Free surface of the full problem computed numerically at a time when the corner jet has already developed. The inset shows a zoom of the jet region. (b) Logarithmic plot showing the evolution of the radius of the tip, $r_{tip}$ (black circles), and the potential at that location, ${\it\phi}_{tip}$ (red squares). The black and red solid lines have slopes $3/2$ and 2 respectively.