Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T01:00:01.073Z Has data issue: false hasContentIssue false

A numerical investigation of fluid flows induced by the oscillations of thin plates and evaluation of the associated hydrodynamic forces

Published online by Cambridge University Press:  15 July 2019

Artem N. Nuriev*
Affiliation:
The Research Institute for Mechanics, Lobachevsky State University of Nizhni Novgorod, 23, Gagarina pr., Nizhnii Novgorod, 603950, Russian Federation
Airat M. Kamalutdinov
Affiliation:
Lobachevskii Institute of Mathematics and Mechanics, Kazan (Volga region) Federal University, 18, Kremlyovskaya St., Kazan, Tatarstan 420008, Russian Federation
Andrey G. Egorov
Affiliation:
Lobachevskii Institute of Mathematics and Mechanics, Kazan (Volga region) Federal University, 18, Kremlyovskaya St., Kazan, Tatarstan 420008, Russian Federation
*
†Email address for correspondence: Artem.Nuriev@kpfu.ru

Abstract

The paper is devoted to the problem of harmonic oscillations of thin plates in a viscous incompressible fluid. The two-dimensional flows caused by the plate oscillations and their hydrodynamic influence on the plates are studied. The fluid motion is described by the non-stationary Navier–Stokes equations, which are solved numerically on the basis of the finite volume method. The simulation is carried out for plates with different thicknesses and shapes of edges in a wide range of control parameters of the oscillatory process: dimensionless frequency and amplitude of oscillations. For the first time in the framework of one model all two-dimensional flow regimes, which were found earlier in experimental studies, are described. Two new flow regimes emerging along the stability boundaries of symmetric flow regimes are localized. The map of flow regimes in the frequency–amplitude plane is constructed. The analysis of the hydrodynamic influence of flows on the plates allow us to establish new effects associated with the influence of the shape of the plates on the drag and inertia forces. Due to these effects, the values of hydrodynamic forces can differ by 90 % at the same parameters of the oscillation. The lower and upper estimates of hydrodynamic forces obtained in the work have a good agreement with the experimental data presented in the literature.

Information

Type
JFM Papers
Copyright
© 2019 Cambridge University Press 
Figure 0

Figure 1.Geometrical characteristics of plates.

Figure 1

Figure 2.The structure of the mesh in the vicinity of the plate edge.

Figure 2

Table 1.The main parameters of the meshes.

Figure 3

Figure 3.The pressure distribution along the surface of the rectangular plate (type I) with relative thickness of $\unicode[STIX]{x1D6E5}=0.1$ for $\unicode[STIX]{x1D6FD}=55,KC=7$ at time $t/T=40$. Solid (for $x<0$) and dashed (for $x>0$) lines correspond to the mesh $M_{3}$, round markers to the mesh $M_{2}$, triangular markers to the mesh $M_{1}$.

Figure 4

Figure 4.Comparison of instantaneous flow patterns at time $t/T=40$ near a rectangular plate (type I) with relative thickness $\unicode[STIX]{x1D6E5}=0.1$ at $\unicode[STIX]{x1D6FD}=55,KC=7$ obtained on meshes $M_{1}$ (a) and $M_{3}$ (b). The vorticity isolines $\unicode[STIX]{x1D6FA}_{z}=[-4,-2,-1,-0.5,0.5,1,2,4]$ are shown.

Figure 5

Figure 5.The flow regime map. The basic symmetric regime: ●, the symmetric regime with the attached vortices: ▪, the symmetric flow with vertical vortex shedding: ◂, regime with a C-shaped structure of the flow: ◃, regime with a V-shaped structure of the flow: ▫, one-sided diagonal regime: ▾, cyclic diagonal regime: ♦, the intermittent diagonal regime: ♢. The boundaries of the flow regimes according to previous research: — ⋅ —, Shrestha et al. (2018); ——, Singh (1979).

Figure 6

Table 2.The coefficients $C_{D}$ and $C_{M}$ of the in-line force acting on the plate with chamfered edges (type II) and relative thickness of $\unicode[STIX]{x1D6E5}=0.25$ for $\unicode[STIX]{x1D6FD}=200$ calculated on different meshes.

Figure 7

Figure 6.The basic symmetric flow regime at $\unicode[STIX]{x1D6FD}=300$, $KC=0.2$. (a) Instantaneous streamlines at $t/T-T_{0}=0$ ($T_{0}=30$), (b) streamlines of the secondary flow.

Figure 8

Figure 7.Visualization of the basic symmetric flow regime at $\unicode[STIX]{x1D6FD}=300$, $KC=0.5$ using dye. Flow structure at time moments $t/T-T_{0}$, where $T_{0}=30$.

Figure 9

Figure 8.Visualization of the symmetric flow with attached vortices at $\unicode[STIX]{x1D6FD}=20$, $KC=2.5$ using dye. Flow structure at time moments $t/T-T_{0}$, where $T_{0}=30$.

Figure 10

Figure 9.The symmetric flow with attached vortices at $\unicode[STIX]{x1D6FD}=25$, $KC=2.5$. (a) Instantaneous streamlines at $t/T-T_{0}=0$ ($T_{0}=30$), (b) streamlines of the secondary flow.

Figure 11

Figure 10.The symmetric flow with vertical vortex shedding at $\unicode[STIX]{x1D6FD}=300$, $KC=1$. (a) Instantaneous streamlines at $t/T-T_{0}=0$ ($T_{0}=30$), (b) streamlines of the secondary flow.

Figure 12

Figure 11.Visualization of the symmetric flow with vertical vortex shedding at $\unicode[STIX]{x1D6FD}=300$, $KC=1$ using dye. Flow structure at time moments $t/T-T_{0}$, where $T_{0}=30$.

Figure 13

Figure 12.Hydrodynamic forces acting on the plate in symmetric flow regimes. (a) $\unicode[STIX]{x1D6FD}=300$, $KC=0.5$, (b) $\unicode[STIX]{x1D6FD}=300$, $KC=1$; ——, results of calculation; ●, Morison approximation.

Figure 14

Figure 13.The dependence of drag and inertia coefficients on the period of oscillations in symmetric flow regimes: ●, $\unicode[STIX]{x1D6FD}=300$, $KC=0.5$; ▪, $\unicode[STIX]{x1D6FD}=300$, $KC=1$.

Figure 15

Figure 14.C-shaped flow regime at $\unicode[STIX]{x1D6FD}=500$, $KC=1$. (a) Instantaneous structure of flow obtained using dye; (b) secondary flow.

Figure 16

Figure 15.V-shaped flow regime at $\unicode[STIX]{x1D6FD}=20$, $KC=3.5$. (a) Instantaneous structure of flow obtained using dye; (b) secondary flow.

Figure 17

Figure 16.The one-sided diagonal flow regime at $\unicode[STIX]{x1D6FD}=300$, $KC=2.5$. Flow structure at time moments $t/T-T_{0}$, where $T_{0}=80$.

Figure 18

Figure 17.Hydrodynamic forces and moment acting on the plate in the one-sided diagonal regime at $\unicode[STIX]{x1D6FD}=300$, $KC=2.5$: ——, results of calculation; ●, Morison approximation.

Figure 19

Figure 18.The dependence of the drag and inertia coefficients on the period of oscillations in the one-sided diagonal regime at $\unicode[STIX]{x1D6FD}=300$, $KC=2.5$.

Figure 20

Figure 19.The stable cyclic diagonal regime; $\unicode[STIX]{x1D6FD}=300$, $KC=6$. Flow structure at time moments $t/T-T_{0}$, where $T_{0}=56$.

Figure 21

Figure 20.Hydrodynamic forces and moment acting on the plate in the cyclic diagonal regime at $\unicode[STIX]{x1D6FD}=300$, $KC=6$; ——, results of calculation; ●, Morison approximation.

Figure 22

Figure 21.The dependence of the drag and inertia coefficients on the period of the oscillations in the cyclic diagonal regime at $\unicode[STIX]{x1D6FD}=300$, $KC=6$.

Figure 23

Figure 22.Drag coefficient $C_{D}$ as a function of $KC$ for the plate of type II with $\unicode[STIX]{x1D6E5}=0.1$. (a) Graphs for different values of $\unicode[STIX]{x1D6FD}$, (b) comparison with the results of other studies.

Figure 24

Figure 23.Inertia coefficient $C_{M}$ as a function of $KC$ for the plate of type II with $\unicode[STIX]{x1D6E5}=0.1$. (a) Graphs for different values of $\unicode[STIX]{x1D6FD}$, (b) comparison with the results of other studies.

Figure 25

Figure 24.Force coefficients $C_{D}$ and $C_{M}$ as a function of $KC$ for $\unicode[STIX]{x1D6FD}=50$ obtained for plates of different types with relative thickness of $\unicode[STIX]{x1D6E5}=0.1$.

Figure 26

Figure 25.Comparison of flow structure and pressure distribution over the surface of plates at $\unicode[STIX]{x1D6FD}=55,KC=7$ between a plate of type II (instantaneous flow patterns in the left column, grey lines on the pressure distribution plot) and of type I (instantaneous flow patterns in the right column, black lines on the pressure distribution plot) with the same relative thickness $\unicode[STIX]{x1D6E5}=0.1$ for the time moments (from top to bottom) $t/T-T_{0}=0,1/7,2/7,3/7$. The dotted lines on the pressure distribution plot correspond to the left side of the plates ($x<0$), the solid lines correspond to the right side of the plates ($x>0$).

Figure 27

Figure 26.Flow separation from the edges of plates of different shapes: (a) type II, $\unicode[STIX]{x1D6E5}=0.1,\unicode[STIX]{x1D6FC}=60^{\circ }$; (b) type I, $\unicode[STIX]{x1D6E5}=0.1$; (c) type III, $\unicode[STIX]{x1D6E5}=0.1,R=0.1$; (d) type III, $\unicode[STIX]{x1D6E5}=0.1,R=0.5$.

Figure 28

Figure 27.Force coefficients $C_{D}$ and $C_{M}$ as a function of $KC$ for $\unicode[STIX]{x1D6FD}=200$ obtained for plates of type II with relative thicknesses of $\unicode[STIX]{x1D6E5}=0,0.1,0.25$.

Figure 29

Figure 28.The distribution of the true pressure over the surfaces of an infinitely thin plate (black lines) and a plate of type II with a thickness of $\unicode[STIX]{x1D6E5}=0.1$ (grey lines) for the oscillation parameters $\unicode[STIX]{x1D6FD}=200,KC=0.8$. Time moments $t/T-T_{0}$: (a) $0$, (b) $1/8$, (c) $2/8$, (d) $3/8$. Dotted lines correspond to the left side of the plates ($x<0$), solid lines to the right side of the plates ($x>0$).

Figure 30

Figure 29.The instantaneous flow patterns. (a) C-shaped flow regime at $\unicode[STIX]{x1D6FD}=64$, $KC=1$. Isosurfaces of the $z$ component of the vorticity vector $\unicode[STIX]{x1D6FA}_{z}=\pm [6,4.66,3.33,2,0.34]$ for the time moment $t/T=104$. (b) The one-sided diagonal flow regime at $\unicode[STIX]{x1D6FD}=64,KC=2$. Isosurfaces of the $z$ component of the vorticity vector $\unicode[STIX]{x1D6FA}_{z}=\pm [10,8,6,4,3]$ for the time moment $t/T=88$.

Figure 31

Figure 30.Comparison of the instantaneous flow patterns of two-dimensional flow (a) and span-averaged three-dimensional flow (b) in the $xOy$ plane. Scalar field $|\unicode[STIX]{x1D6FA}_{z}|$ visualization at the time moment $t/T=87$ for $\unicode[STIX]{x1D6FD}=64,KC=2$.

Figure 32

Figure 31.Forces acting on the plate in the one-sided diagonal regime for $\unicode[STIX]{x1D6FD}=64$,$KC=2$. Two-dimensional calculation (dotted line), three-dimensional calculation (solid line).

Figure 33

Figure 32.Cyclic diagonal flow regime at $KC=7$, $\unicode[STIX]{x1D6FD}=64$ (a), $\unicode[STIX]{x1D6FD}=200$ (b). Isosurfaces of the $z$ component of the vorticity vector $\unicode[STIX]{x1D6FA}_{z}=\pm [5.55,16.66,27.77,38.88,50]$ for the time moment $t/T=48$.

Figure 34

Figure 33.Comparison of the instantaneous flow patterns of 2-D flow (a) and spanwise-averaged 3-D flow (b) in the $xOy$ plane. Scalar field $|\unicode[STIX]{x1D6FA}_{z}|$ visualization at the time moment $t/T=47$ for $\unicode[STIX]{x1D6FD}=64,KC=7$.

Figure 35

Figure 34.Forces acting on the plate in cyclic diagonal flow regime for $\unicode[STIX]{x1D6FD}=64$,$KC=7$ (a,b) and $\unicode[STIX]{x1D6FD}=200,KC=7$ (c,d). Two-dimensional calculations (dotted lines), 3-D calculations (solid lines).

Figure 36

Table 3.The coefficients $C_{D}$ and $C_{M}$ for two- and three-dimensional cases.