Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-17T21:42:29.076Z Has data issue: false hasContentIssue false

Preparation and Characterization of Single-crystal Aluminum Nitride Substrates

Published online by Cambridge University Press:  13 June 2014

Leo J. Schowalter
Affiliation:
Rensselaer Polytechnic Institute Troy, NY 12180Crystal IS, Inc. Latham, NY 12110
J. Carlos Rojo
Affiliation:
Crystal IS, Inc. Latham, NY 12110
Nikolai Yakolev
Affiliation:
Rensselaer Polytechnic Institute Troy, NY 12180
Yuriy Shusterman
Affiliation:
Rensselaer Polytechnic Institute Troy, NY 12180
Katherine Dovidenko
Affiliation:
Rensselaer Polytechnic Institute Troy, NY 12180
Rungjun Wang
Affiliation:
Rensselaer Polytechnic Institute Troy, NY 12180
Ishwara Bhat
Affiliation:
Rensselaer Polytechnic Institute Troy, NY 12180
Glen A. Slack
Affiliation:
Rensselaer Polytechnic Institute Troy, NY 12180Crystal IS, Inc. Latham, NY 12110

Abstract

Large (up to 10mm diameter) aluminum nitride (AlN) boules have been grown by the sublimation-recondensation method to study the preparation of high-quality single crystal substrates. The growth mechanism of the boules has been studied using AFM. It has been determined that large single crystal grains in those boules grow with a density of screw dislocations below 5×104 cm−3 while edge dislocations are at lower density (none were observed). High-quality AlN single crystal substrates for epitaxial growth have been prepared and characterized using Chemical Mechanical Polishing (CMP) and AFM imaging, respectively. Also, the differential etching effect of KOH solutions on the N and Al-terminated faces of AlN on vicinal c-faces has been investigated. In order to identify the N or Al-terminated face, convergent beam electron diffraction has been used.

Information

Type
Research Article
Copyright
Copyright © 1996 Materials Research Society
Figure 0

Figure1.Example of AlN boule grown at Crystal IS.

Figure 1

Figure 2.AFM image of the step flow growth mechanism of (0001)

Figure 2

Figure 3.AFM image of a screw dislocation on a (0001) facet on the as-grown surface of AlN

Figure 3

Figure 4.Ion-channeling results obtained on the a-face after CMP process

Figure 4

Figure 5.AFM image on a 2x2 μm2 area of the N-terminated c-face of AlN after KOH etching. Each height division represents 0.5 μm

Figure 5

Figure 6.Typical TEM image of the crystal taken under g= 10 0 bright field conditions, the direction of g vector is shown by arrow.

Figure 6

Figure 7.Selected area electron diffraction pattern of the AlN crystal taken from the area of about 1.5 μm in diameter ([ 110 ] zone axis).

Figure 7

Figure 9.Calculated intensities (arbitrary units) of the 0002, 000 , 10 2 and 10 diffracted beams vs. sample thickness (Å) for [ 110 ] zone of wurtzite AlN crystal structure.

Figure 8

Figure 9.Convergent beam electron diffraction pattern taken from the thin (about 100 Å) region of the AlN crystal in [ 110 ] zone axis.