Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T09:43:03.395Z Has data issue: false hasContentIssue false

Study of Thin films Polarity of Group III Nitrides

Published online by Cambridge University Press:  13 June 2014

K. Dovidenko
Affiliation:
Center for Advanced Materials and Smart Structures, Dept. of Mat. Sci. & Eng., North Carolina State University, Raleigh, NC 27695, kddovide@eos.ncsu.edu
S. Oktyabrsky
Affiliation:
NYS Center for Advanced Thin Film Technology, State University of New York, Albany, NY 12203
J. Narayan
Affiliation:
Center for Advanced Materials and Smart Structures, Dept. of Mat. Sci. & Eng., North Carolina State University, Raleigh, NC 27695, kddovide@eos.ncsu.edu
M. Razeghi
Affiliation:
Center for Quantum Devices, Northwestern University, Evanston, Illinois 60208.

Abstract

Thin films of GaN grown by MOCVD on (0001) sapphire were studied by transmission electron microscopy in order to correlate the observed extended defects with crystal polarity of the films. We propose relatively simple and unambiguous method of polarity determination for wurtzite group III nitrides based on the dependence of the intensity of diffracted beams upon thickness of the specimen. Due to the dynamic scattering by polar structure, the convergent beam electron diffraction patterns lose inversion symmetry and become in fact fingerprints of the structure carrying information about crystal polarity. In this study, we have used the thinnest regions of the specimens (<15 nm) and multiple diffraction spots in high-symmetry orientation for polarity determination. The films were found to have Ga-polar surfaces, either being unipolar, or containing thin (10-30 nm in diameter) columnar inversion domains (IDs) of N-polarity. The occurrence of IDs was correlated with specific types of dislocation distribution in the films.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Fig. 1(a) Weak beam dark field cross-sectional TEM image of a GaN film grown on sapphire. The arrow indicates the inversion domain. The image is taken near the [110]GaN zone.(b) Schematic representation of a GaN crystal structure viewed in [110] direction.

Figure 1

Fig. 2.Calculated intensities (arbitrary units) of <0002> and <101> beams vs. sample thickness (Å) for [110] zone of wurtzite GaN crystal structure.

Figure 2

Fig. 3.CBED patterns obtained from (a) the GaN matrix; and (b) the inversion domain ID. The TEM image of the corresponding area of the cross-sectional GaN sample is shown in (c). Positions of the electron beam for taking the CBEDs are shown by circles. White arrow indicates the direction of film growth.

Figure 3

Fig. 4.Simulated convergent beam electron diffraction pattern obtained for 80 Å thickness of the [110] zone of GaN wurtzite structure. The reflections are indexed.