Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T08:29:00.840Z Has data issue: false hasContentIssue false

Rheological evaluation of colloidal dispersions using the smoothed profile method: formulation and applications

Published online by Cambridge University Press:  03 March 2016

John J. Molina*
Affiliation:
Fukui Institute for Fundamental Chemistry, Kyoto University, Kyoto 606-8103, JapanDepartment of Chemical Engineering, Kyoto University, Kyoto 615-8510, Japan
Kotaro Otomura
Affiliation:
Department of Physics, University of Tokyo, Tokyo 133-0033, Japan
Hayato Shiba
Affiliation:
Institute for Solid State Physics, University of Tokyo, Chiba 277-8581, Japan
Hideki Kobayashi
Affiliation:
Theoretical Soft Matter and Biophysics, Institute for Advanced Simulation, Forschungszentrum Jülich, 52425 Jülich, Germany
Masaki Sano
Affiliation:
Department of Physics, University of Tokyo, Tokyo 133-0033, Japan
Ryoichi Yamamoto
Affiliation:
Department of Chemical Engineering, Kyoto University, Kyoto 615-8510, Japan
*
†Email address for correspondence: john@cheme.kyoto-u.ac.jp

Abstract

The smoothed profile method is extended to study the rheological behaviour of colloidal dispersions under shear flow by using the Lees–Edwards boundary conditions. We start with a reformulation of the smoothed profile method, a direct numerical simulation method for colloidal dispersions, so that it can be used with the Lees–Edwards boundary condition, under steady or oscillatory-shear flow. By this reformulation, all the resultant physical quantities, including local and total shear stresses, become available through direct calculation. Three simple rheological simulations are then performed for (1) a spherical particle, (2) a rigid bead chain and (3) a collision of two spherical particles under shear flow. Quantitative validity of these simulations is examined by comparing the viscosity with that obtained from theory and Stokesian dynamics calculations. Finally, we consider the shear-thinning behaviour of concentrated colloidal dispersions.

Information

Type
Papers
Copyright
© 2016 Cambridge University Press 
Figure 0

Figure 1.Comparison of the peculiar fluid velocity $(1-{\it\phi}){\bf\xi}$ and normalized deviatoric Newtonian shear stress field ${\it\delta}{\it\sigma}^{12}/{\it\eta}_{f}\dot{{\it\gamma}}$ for a single spherical particle, under simple shear ($\dot{{\it\gamma}}=10^{-3}$), placed at the origin: (a,d) analytical solution (unbounded flow) and (b,e) numerical solution using the SPM (with periodic boundary conditions), (c,f) normalized shear stress difference $|{\it\delta}{\it\sigma}^{12}-{\it\delta}{\it\sigma}^{12}|/{\it\eta}_{f}\dot{{\it\gamma}}$. Solid lines show the particle surface assuming a sphere of radius $a$, dashed lines show the surface of the outer boundary $a^{\prime }=a+{\it\zeta}/2$ (the radius of the particle including the interfacial boundary layer). (a–c) Shows results for $a/{\it\Delta}=4$ (${\it\epsilon}=0.0625$), (d–f) for $a/{\it\Delta}=8$ (${\it\epsilon}=0.125$).

Figure 1

Figure 2.(a) Angular velocity ${\it\omega}_{z}$ and (b) intrinsic viscosity $[{\it\eta}]$ as a function of $Re$ for a single spherical particle under simple-shear flow, for ${\it\epsilon}=0.0625$ (filled circles). Results obtained by Mikulencak & Morris for two different system sizes ${\it\epsilon}=0.01$ (open squares) and ${\it\epsilon}=0.1$ (open circles), are also shown.

Figure 2

Figure 3.Schematic representation of a (rigid) linear chain with $n=5$ beads in simple-shear flow.

Figure 3

Figure 4.Jeffery’s orbits for a single spherical bead chain, of geometric aspect ratio $r=3$ and effective aspect ratio $r_{e}\simeq 2.8$. The Euler angles (${\it\psi},{\it\phi},{\it\theta}$) characterizing the orientation of the chain (see figure 3), are given in (a), (b) and (c), respectively, for one full period. The corresponding intrinsic viscosity is given in plot (d). Simulation data using our SPM model is represented using the filled symbols and Jeffery’s solution (using the effective aspect ratio $r_{e}$) is given by the dashed lines. For the intrinsic viscosity $[{\it\eta}]$, data obtained from SD calculations are also given (solid lines).

Figure 4

Figure 5.Particle shear stress $\unicode[STIX]{x1D634}^{12}$ for a single rigid bead chain of aspect ratio $r=3$ ($r_{e}\simeq 2.8$), for different orbit parameters: (a) $C=\infty$, (b) $C=1.0$, (c) $C=0.32$. Simulation data obtained using our SPM model, with a diffuse fluid/particle interface, is given by the solid symbols. Results from SD calculations using the same hard-sphere radius $a$ as the SPM simulations is given by the solid line, results obtained using a modified hard-sphere particle radius $a^{\prime }/a=0.95,1.05$, are given as dashed lines.

Figure 5

Figure 6.A pair of particles in a host fluid under shear flow is shown for three consecutive times $\dot{{\it\gamma}}t=-2.53,~-1.17,$ and $0.87$, for a shear rate $\dot{{\it\gamma}}=10^{-3}$. The peculiar velocity field ${\bf\xi}$ and deviatoric Newtonian shear stress ${\it\delta}{\it\sigma}^{12}/{\it\eta}_{f}\dot{{\it\gamma}}$ are displayed using the arrows and colour map, respectively.

Figure 6

Figure 7.Collision process for a pair of particles in linear shear flow. (a) The total deviatoric shear stress $\unicode[STIX]{x1D634}^{12}$ obtained from our simulations is shown with filled blue points, and the deviatoric shear stress $\unicode[STIX]{x1D634}_{H}^{12}$ is plotted with blue open circles, for particles of radius $a/{\it\Delta}=8$ (${\it\epsilon}=0.125$). SPM results for the shear stress are compared with Batchelor’s approximation (dashed–dotted lines), and SD calculations with (solid lines) and without (dashed lines) lubrication corrections. The pink and blue lines correspond to results obtained for an equivalent hard-sphere radius $a$ and an effective hard-sphere radius $a_{eff}/a=0.975$, respectively. (b) The surface-to-surface distance between the particles $\overline{r}-2a$, as well as the $x$ ($y$) components of their relative position $\overline{x}$ ($\overline{y}$).

Figure 7

Figure 8.Relative deviation of the particle contribution to the shear stress $\unicode[STIX]{x1D634}^{12}$ obtained by SPM with respect to Batchelor’s results is plotted as a function of particle resolution $a/{\it\Delta}$. This deviation is estimated in the time region $\dot{{\it\gamma}}t\simeq 2$ where $\unicode[STIX]{x1D668}^{SPM}=\unicode[STIX]{x1D668}_{H}^{DNS}$. The impact parameter is set as ${\rm\Delta}y=a$.

Figure 8

Figure 9.The viscosity of a dispersion of spherical colloidal particles as a function of Péclet number $Pe$, for various particle concentrations ${\it\Phi}$. The data obtained using the proposed Lees–Edwards SPM method (filled symbols), is compared with the data previously obtained data using an externally driven zig-zag shear flow (open symbol) by Iwashita & Yamamoto (2009). The dashed lines show the fit to the empirical formula given in (3.14). Error bars, representing the standard deviation of the mean, have been drawn for a selection of the simulation results.