Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T17:05:13.427Z Has data issue: false hasContentIssue false

On Richtmyer–Meshkov finger collisions in a light fluid layer under reshock conditions

Published online by Cambridge University Press:  02 December 2024

Xu Guo
Affiliation:
Advanced Propulsion Laboratory, Department of Modern Mechanics, University of Science and Technology of China, Hefei 230026, PR China
Zhouyang Cong
Affiliation:
Advanced Propulsion Laboratory, Department of Modern Mechanics, University of Science and Technology of China, Hefei 230026, PR China
Ting Si*
Affiliation:
Advanced Propulsion Laboratory, Department of Modern Mechanics, University of Science and Technology of China, Hefei 230026, PR China
Xisheng Luo
Affiliation:
Advanced Propulsion Laboratory, Department of Modern Mechanics, University of Science and Technology of China, Hefei 230026, PR ChinaState Key Laboratory of High Temperature Gas Dynamics, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, PR China
*
†Email address for correspondence: tsi@ustc.edu.cn

Abstract

The fingers known as bubbles (spikes) resulting from the penetration of light (heavy) fluids into heavy (light) fluids are significant large-scale features of Richtmyer–Meshkov instability (RMI). Through shock-tube experiments, we study finger collisions in light fluid layers under reshock conditions. Four unperturbed fluid layers with varying thicknesses are created to analyse the motion of waves and interfaces during finger collisions. The wave dynamics, sensitive to initial layer thicknesses, are characterized by a one-dimensional theory. Eight perturbed fluid layers, with four thicknesses and two interface phase combinations, are generated to explore the finger collision mechanism. It is shown that after reshock, the initial in-phase and anti-phase cases undergo spike–bubble rear-end collisions (SBCs) and spike–spike head-on collisions (SSCs), respectively. Compared with SBCs, SSCs significantly suppress spike growth, leading to the attenuation of perturbation growth, especially for larger thicknesses. As the initial thickness decreases, an SSC impedes the downstream interface from reversing its phase, resulting in abnormal RMI, thereby reducing the SSC's effectiveness in attenuating growth. The effects of rarefaction waves enhance both interfaces’ amplitudes and the whole layer's thickness, diminishing the intensity of finger collisions, while the second reshock exerts an opposing influence. Linear and nonlinear models, incorporating the influence of reshocks and rarefaction waves, are developed to predict the interface perturbation growth before and after finger collisions.

Information

Type
JFM Papers
Copyright
© The Author(s), 2024. Published by Cambridge University Press
Figure 0

Figure 1.Initial arrangements of the light fluid layer for the perturbed case with (a) in-phase and (b) anti-phase configurations. Here, I1 and I2 denote the upstream and downstream interfaces, respectively; $L_0$ and $L_{re}$ denote the initial fluid-layer thickness and the reflection distance, respectively.

Figure 1

Table 1.Initial parameters of the perturbed fluid-layer cases. $L_0$, the initial fluid-layer thickness; $a_0^{\rm {I1}}$ and $a_0^{\rm {I2}}$, the initial amplitudes of I1 and I2.

Figure 2

Figure 2.Schematic of the interface formation device. Here, ‘SHO coating’ indicates the super-hydrophobic-oleophobic coating, used to constrain the soap film to the designed shape.

Figure 3

Figure 3.Schlieren images (top) and corresponding sketches (bottom) for case L50-1D. Numbers denote time in $\mathrm {\mu }{\rm s}$.

Figure 4

Figure 4.(a) The $x\unicode{x2013}t$ diagram for case L50-1D. (b) Enlarged view of the shock–rarefaction–wall interactions marked with red dashed lines. Here, IS is the incident shock; RS$_1$ and RS$_2$ are the first and second reshocks; TS$_{a,b,c}$ and TS$_{1,2,3}$ are the transmitted shocks; RS$_{a,b,c,d}$ and RTS$^\prime _{1,2}$ are the reflected shocks; RW$_1$, RRW$_1^\prime$, RRW$_1$ and TRW$_a$ are the rarefaction waves.

Figure 5

Figure 5.Sketches of wave–interface interactions at $t_0$–$t_4$: (a) the moment when RS$_1$ arrives at I2; (b) the moment when RS$_d$ arrives at I1; (c) the moment when the head of RRW$_1$ arrives at I2; (d) the moment when RS$_2$ arrives at I2; (e) the moment when TS$_c$ arrives at I1. Here, $U_{f1}$ ($U_{f2}$ and $U_{f3}$) denotes the asymptotic velocity for both interfaces after multiple interactions of IS (RS$_1$ and RS$_2$) and its subsequent reverberating waves with the layer.

Figure 6

Table 2.Glossary for various physical quantities involved in this work.

Figure 7

Table 3.Values of the specific physical quantities for different cases determined by the 1-D theory ((3.1a)–(3.6c)). Here, $t_0$ denotes the time when RS$_1$ arrives at I2; $t_1$ denotes the time when RS$_d$ arrives at I1; $t_2$ denotes the time when the head of RRW$_1$ arrives at I2; $t_3$ denotes the time when RS$_2$ arrives at I2; $t_4$ denotes the time when TS$_c$ arrives at I1; $\Delta t^{\rm {I2}}_{RRW1}$ ($\Delta t^{\rm {I1}}_{TRWa}$) denotes the time of passage for RRW$_1$ (TRW$_a$) through I2 (I1); and $g^{\rm {I2}}_{RRW1}$ ($g^{\rm {I1}}_{TRWa}$) denotes the average acceleration imposed on I2 (I1) by RRW$_1$ (TRW$_a$).

Figure 8

Figure 6.(a) The $x\unicode{x2013}t$ diagram for case L10-1D. (b) Enlarged view of the shock–rarefaction–wall interactions marked with red dashed lines.

Figure 9

Figure 7.Schlieren images of interface evolution for cases (a) L50-IP, (b) L30-IP, (c) L10-IP and (d) L5-IP. Here, RS$_1$ and RS$_2$ are the first and second reshocks; ‘Sp’ and ‘Bu’ indicate spikes and bubbles; and SBC denotes the spike–bubble rear-end collision. Numbers outside and inside parentheses represent dimensional and dimensionless time, respectively, and similarly hereinafter. The unit of dimensional time is $\mathrm {\mu }{\rm s}$, and dimensionless time is expressed as $k\,\Delta U_f(t-t_1)$, which is introduced in § 4.2.

Figure 10

Figure 8.Schlieren images of interface evolution for cases (a) L50-AP, (b) L30-AP, (c) L10-AP and (d) L5-AP. Here, RS$_1$ and RS$_2$ are the first and second reshocks; ‘Sp’ and ‘Bu’ indicate spikes and bubbles; SSC denotes the spike–spike head-on collision; and ARMI denotes the abnormal RMI such that I2 cannot reverse its phase due to SSC, resulting in formations of two bubbles at I2, as observed in panels (c,d) at $t = 1253$ and $1240\ \mathrm {\mu }{\rm s}$.

Figure 11

Table 4.Summary of types of finger collisions in different cases. The symbols $\bigcirc$ and $\checkmark$ represent the absence or presence of abnormal RMI, respectively.

Figure 12

Figure 9.Dimensionless amplitude growth of I1 and I2 for the initial (a) in-phase and (b) anti-phase cases. The durations of TRW$_a$–I1 and RRW$_1$–I2 (TS$_c$–I1 and RS$_2$–I2) interactions in cases L50-IP and L50-AP are marked with purple (blue) dotted lines.

Figure 13

Figure 10.Dimensionless mixing width growth for different cases, scaled using (a) $\Delta U_f$ and (b) $v_h$ on the time axis. Here, $\Delta U = |U_{f2}-U_{f1}|$ characterizes the fluid-layer interface velocity change during the reshock–layer interaction process, and $v_h$ is the reshocked linear mixing width growth rate, obtained from linear fits of the experimental mixing width data.

Figure 14

Figure 11.Schematics of the vorticity distributions resulting from the interactions between the waves (RRW$_1$, TRW$_a$, RS$_2$ and TS$_c$) and the two interfaces for initial (a–c) in-phase and (d–f) anti-phase cases.

Figure 15

Table 5.Comparison of the theoretical and experimental amplitude growth rates: $v_{e}^{{\rm {I1}}}$ and $v_{e}^{{\rm {I2}}}$ are the experimental linear amplitude growth rates for I1 and I2; $v_{t}^{{\rm {I1}}}$ and $v_{t}^{{\rm {I2}}}$ are the theoretical linear amplitude growth rates for I1 and I2, obtained from (5.7a) and (5.7b); ${\mathrm {d} a^{\rm {I1}}}/{\mathrm {d} t}$ and ${\mathrm {d} a^{\rm {I2}}}/{\mathrm {d} t}$, the reshock-induced linear amplitude growth rates for I1 and I2, are obtained from (5.5a) and (5.5b); $v_{bf}^{\rm {I1}}$ and $v_{bf}^{\rm {I2}}$ are the experimental amplitude growth rates for I1 and I2 before reshock; $a_{\alpha }^{\rm {I1}}$, $a_{1}^{\rm {I1}}$, $a_{\alpha }^{\rm {I2}}$ and $a_{\beta }^{\rm {I2}}$ are the post-reshock amplitudes, as detailed in figures 12(b)–12(e). The units of velocities and lengths are ${\rm m}\ {\rm s}^{-1}$ and mm, respectively.

Figure 16

Figure 12.Schematics of the interactions between the shocks (RS$_1$, TS$_b$, RS$_c$ and RS$_d$) and the two perturbed interfaces: (a) the moment prior to the impact of RS$_1$; (b) the moment when RS$_1$ arrives at the centre of I2; (c) the moment when TS$_b$ completely passes through I1; (d) the moment when RS$_c$ completely passes through I2; (e) the moment when RS$_d$ completely passes through I1.

Figure 17

Figure 13.Comparison of the interface amplitude growths between experimental results and theoretical predictions in cases (a) L50-IP, (b) L50-AP, (c) L30-IP and (d) L30-AP. The durations of interactions of RRW$_1$, TRW$_a$, RS$_2$ and TS$_c$ with the interfaces are highlighted within the shaded areas.

Figure 18

Table 6.Comparison of the amplitude variations ($\Delta a^{\rm {I1}}_{RTS}$ and $\Delta a^{\rm {I1}}_{stretch}$) of I1 resulting from the RTS and the stretching effect.

Figure 19

Figure 14.Comparison of the interface amplitude growths between experimental results and theoretical predictions in cases (a) L10-IP, (b) L10-AP, (c) L5-IP and (d) L5-AP. Panel (b) includes a schlieren image illustrating the abnormal RMI phenomenon at I2, with further details provided in figures 8(c) and 8(d). The insets in (b,d) illustrate the prediction process for the nonlinear amplitude growth of I2 in cases L10-AP and L5-AP. Here, DR$_{hbu1}$ and DR$_{hbu2}$, corresponding to the bubble components of the DR model, are used to estimate the nonlinear amplitude growths for the bubble widths $h_{bu1}$ and $h_{bu2}$, and $({\rm DR}_{hbu1}-{\rm DR}_{hbu2})/2$ is used to predict the nonlinear amplitude growth of I2 after the occurrence of the abnormal RMI.