Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T15:15:50.681Z Has data issue: false hasContentIssue false

Linking turbulent waves and bubble diffusion in self-aerated open-channel flows: two-state air concentration

Published online by Cambridge University Press:  05 July 2023

Matthias Kramer*
Affiliation:
School of Engineering and Information Technology (SEIT), UNSW Canberra, Canberra, ACT 2610, Australia
Daniel Valero
Affiliation:
Institute for Water and River Basin Management (IWG), Karlsruhe Institute of Technology (KIT), 76131 Karlsruhe, GermanyWater Resources and Ecosystems, IHE Delft, 2611AX Delft, the Netherlands
*
†Email address for correspondence: m.kramer@adfa.edu.au

Abstract

High-Froude-number flows become self-aerated when the destabilizing effect of turbulence overcomes gravity and surface tension forces. Traditionally, the resulting air concentration profile has been explained using single-layer approaches that invoke solutions of the advection–diffusion equation for air in water, i.e. bubbles’ dispersion. Based on a wide range of experimental evidence, we argue that the complete air concentration profile shall be explained through the weak interaction of different canonical turbulent flows, namely a turbulent boundary layer (TBL) and a turbulent wavy layer (TWL). Motivated by a decomposition of the streamwise velocity into a pure wall flow and a free-stream flow (Krug et al., J. Fluid Mech., vol. 811, 2017, pp. 421–435), we present a physically consistent two-state formulation of the structure of a self-aerated flow. The air concentration is mathematically built upon a modified Rouse profile and a Gaussian error function, resembling vertical mass transport in the TBL and the TWL. We apply our air concentration theory to over 500 profiles from different data sets, featuring excellent agreement. Finally, we show that the turbulent Schmidt number, characterizing the momentum-mass transfer, ranges between 0.2 and 1, which is consistent with previous mass-transfer experiments in TBLs. Altogether, the proposed flow conceptualization sets the scene for more physically based numerical modelling of turbulent mass diffusion in self-aerated flows.

Information

Type
JFM Papers
Copyright
© The Author(s), 2023. Published by Cambridge University Press
Figure 0

Figure 1.Characteristic regions and modelling approaches of self-aerated open-channel flows: (a) snapshot of the self-aerated flow down a stepped chute (The University of Queensland) with clear distinction of the bubbly flow region and the wavy free-surface region; specific water discharge $q = 0.143$ m$^2$ s$^{-1}$, chute angle $\theta = 45^\circ$; step edges 5 to 7; (b) schools of thought in the modelling of air concentration distributions in self-aerated flows.

Figure 1

Figure 2.Two-state model for air concentration distribution: (a) representation of the TBL air concentration (teal line, (2.1)), TWL air concentration (blue line, (2.2)), interface position $y_i$ and two-state model $\hat {c}$; (b) probability distribution of interface position, centred around $y_\star$; (c) comparison of the convoluted profile (convolution operation indicated by the $\boldsymbol {*}$ symbol) with data from Straub & Anderson (1958, specific discharge $q=0.322$ m$^2$ s$^{-1}$; streamwise position $x = 13.88$ m).

Figure 2

Figure 3.Measured air concentration distributions in flows down a laboratory smooth chute; data from Straub & Anderson (1958, $q = 0.322$ m$^2$ s$^{-1}$; $x = 13.88$ m); (a–h) comparison of (2.1), (2.2) and (2.8) with measurements.

Figure 3

Table 1.Normalized parameters of the two-state convolution model for profiles shown in figure 3; as no detailed velocity measurements were available from Straub & Anderson (1958), we determined $y_\star$ first, and subsequently assumed $\delta = 1.25 y_\star$ (see § 3.2); measurements taken at $x = 13.88$ m from the flume inlet.

Figure 4

Figure 4.Determination of the transition point parameters $y_\star$ and $c_\star$: (a) exemplary air concentration profile, measured within the flow down a stepped spillway; $\theta = 45^\circ$; $q = 0.067$ m$^2$ s$^{-1}$; step edge 11; (b) corresponding normalized velocity profile and velocity fluctuations in the bed-normal direction; (c) ratio of $y_\star$ and boundary layer thickness $\delta$; and (d) air concentration at transition point vs mean air concentration.

Figure 5

Figure 5.Model parameters are a function of the mean air concentration: (a) Rouse number $\beta$; (b) relation of TWL mixture flow depth $y_{50_{TWL}}$ to $y_{90}$; (c) relation of TWL length scale $\mathcal {H}$ to $y_{90}$.

Figure 6

Figure 6.Measured turbulent diffusivities vs theoretical parabolic distribution for different turbulent Schmidt numbers.

Figure 7

Figure 7.Comparison of the proposed two-state formulation with common air concentration models for stepped chutes; data from Bung (2009) with $q = 0.07$ m$^2$ s$^{-1}$; step height $h = 0.06$ m; measurements taken at step edge 16.

Supplementary material: PDF

Kramer and Valero supplementary material

Kramer and Valero supplementary material

Download Kramer and Valero supplementary material(PDF)
PDF 3.2 MB