Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-17T22:49:15.196Z Has data issue: false hasContentIssue false

High-Temperature Reliability of GaN Electronic Devices

Published online by Cambridge University Press:  13 June 2014

Seikoh Yoshida
Affiliation:
Yokohama R&D Laboratories, The Furukawa Electric Co., Ltd., 2-4-3, Okano, Nishi-ku, Yokohama, 220-0073, Japan, seikoh@yokoken.furukawa.co.jp
Joe Suzuki
Affiliation:
Yokohama R&D Laboratories, The Furukawa Electric Co., Ltd., 2-4-3, Okano, Nishi-ku, Yokohama, 220-0073, Japan, seikoh@yokoken.furukawa.co.jp

Abstract

High-quality GaN was grown using gas-source molecular-beam epitaxy (GSMBE). The mobility of undoped GaN was 350 cm2/Vsec and the carrier concentration was 6×1016 cm−3 at room temperature. A GaN metal semiconductor field-effect transistor (MESFET) and an n-p-n GaN bipolar junction transistor (BJT) were fabricated for high-temperature operation. The high-temperature reliability of the GaN MESFET was also investigated. That is, the lifetime of the FET at 673 K was examined by continuous current injection at 673 K. We confirmed that the FET performance did not change at 673 K for over 1010 h. The aging performance of the BJT at 573 K was examined during continuous current injection at 573 K for over 850 h. The BJT performance did not change at 573 K. The current gain was about 10. No degradation of the metal-semiconductor interface was observed by secondary ion-mass spectrometry (SIMS) and transmission electron microscopy (TEM). It was also confirmed by using Si-ion implantation that the contact resistivity of the GaN surface and electrode materials could be lowered to 7×10−6 ohmcm2.

Information

Type
Research Article
Copyright
Copyright © 1996 Materials Research Society
Figure 0

Figure 1.Contact resistivities versus GaN carrier concentrations.

Figure 1

Figure 2.Cross-sectional TEM image of GaN after Si-ion implantation and annealing at 1123 K.

Figure 2

Figure 3.Aging property of Ids of a GaN MESFET during continuous-current injection at 673 K.

Figure 3

Figure 4.Current-voltage characteristics (Ids-Vds) of a GaN MESFET at 673 K. The gate voltages (Vgs) was changed from 0 V to −5 V in steps of −1 V.

Figure 4

Figure 5.Schematic drawing of the structure of an n-p-n bipolar junction transistor using a GaN.

Figure 5

Figure 6.Current (Ic) - voltage (Vc) characteristics as measured in the common-emitter mode at 573 K. The base current (Ib) was changed from 20 µA in steps of 50 µA.

Figure 6

Figure 7.p-n junction property between of the base and emitter electrodes at 573 K.

Figure 7

Figure 8.Aging property of GaN BJT at 573 K.