Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-18T09:28:59.330Z Has data issue: false hasContentIssue false

An Experimentally Derived Kinetic Model for Smectite-to-Illite Conversion and Its Use as a Geothermometer

Published online by Cambridge University Press:  28 February 2024

Wuu-Liang Huang
Affiliation:
Exxon Production Research Company, P.O. Box 2189, Houston, Texas 77252-2189
John M. Longo
Affiliation:
Exxon Production Research Company, P.O. Box 2189, Houston, Texas 77252-2189
David R. Pevear
Affiliation:
Exxon Production Research Company, P.O. Box 2189, Houston, Texas 77252-2189
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

The smectite-to-illite conversion during shale diagenesis has recently been used to constrain the estimate of a basin's thermal history. We have systematically investigated the kinetics for the conversion of a Na-saturated montmorillonite (SWy-1) to a mixed-layer smectite/illite as a function of KCl concentration (from 0.1 to 3 moles/liter) over a temperature range of 250° to 325°C at 500 bars in cold-seal pressure vessels using gold capsules. The results show that the conversion rate can be described by a simple empirical rate equation

-dS/dt = A · exp(-Ea/RT) · [K+] · S2

where S = fraction of smectite layers in the I/S, t = time in seconds, A = frequency factor = 8.08 × 10-4 sec-1, exp = exponential function, Ea = activation Energy = 28 kcal/mole, R = gas constant, 1.987 cal/deg-mole, T = temperature (degree Kelvin), [K+] = K+ concentration in molarity (M) in the fluid.

The results also show that Ca2+ in solutions barely affects the illitization rate, whereas Mg2+ significantly retards the rate. The retardation, however, is not as severe as previously reported. Na+ ion can significantly retard the rate only if the concentration is high.

We found that by assuming a range 0.0026-0.0052 moles/liter (100-200 ppm) of K+, concentrations similar to the value typically reported in oil field brines, the present kinetic model can reasonably predict the extent of the smectite-to-illite conversion for a number of basins from various depths and age. This narrow range of potassium concentrations, therefore, is used to model the smectite-to-illite conversion in shale when the actual chemical information of pore fluid is not available.

The kinetic equation has been tested using field data from a large variety of geologic settings worldwide (i.e., the Gulf of Mexico, Vienna Basin, Salton Trough Geothermal Area, East Taiwan Basin, Huasna Basin, etc). The results show that the equation reasonably predicts the extent of the reaction within our knowledge of the variables involved, such as burial history, thermal gradients, and potassium concentration.

Information

Type
Research Article
Copyright
Copyright © 1993, The Clay Minerals Society