Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T16:11:42.418Z Has data issue: false hasContentIssue false

Characteristics of Ti/Pt/Au Ohmic Contacts on p-type GaN/AlxGa1−xN Superlattices

Published online by Cambridge University Press:  13 June 2014

L. Zhou
Affiliation:
Microelectronics Laboratory, Department of Electrical and Computer Engineering, Univ. of Illinois, Urbana-Champaign, IL 61801, U.S.A.
F. Khan
Affiliation:
Microelectronics Laboratory, Department of Electrical and Computer Engineering, Univ. of Illinois, Urbana-Champaign, IL 61801, U.S.A.
A.T. Ping
Affiliation:
Microelectronics Laboratory, Department of Electrical and Computer Engineering, Univ. of Illinois, Urbana-Champaign, IL 61801, U.S.A.
A. Osinsk
Affiliation:
NZ Applied Technologies, Woburn, MA 01801, U.S.A.
I. Adesida
Affiliation:
Microelectronics Laboratory, Department of Electrical and Computer Engineering, Univ. of Illinois, Urbana-Champaign, IL 61801, U.S.A.

Abstract

Ti/Pt/Au metallization on p-type GaN/AlxGa1−xN (x=0.10 and 0.20) superlattices (SL) were investigated as ohmic contacts. Current-voltage and specific contact resistance measurements indicate enhanced p-type doping in the superlattice structures compared to that in GaN. Ti/Pt/Au is shown to be an effective ohmic metallization scheme on p-type GaN/AlxGa1−xN superlattices. A specific contact resistance of Rc = 4.6×10−4 ω-cm2 is achieved for unalloyed Ti/Pt/Au on GaN/Al0.2Ga0.8N SL. This is reduced to 1.3×10−4 ω-cm2 after annealing for 5 minutes at 300 °C.

Information

Type
Research Article
Copyright
Copyright © 1996 Materials Research Society
Figure 0

Figure 1.Current-voltage characteristics of as-deposited Ti/Pt/Au contacts on p-Type GaN/AlxGa1−xN superlattices (x=0.1 and 0.2)

Figure 1

Figure 2.Measured resistance vs. contact spacing plot for the as-deposited Ti/Pt/Au contacts on p-type GaN/AlxGa1−xN superlattices (x=0.1 and 0.2). Dotted lines are least-square best fits to the different data sets.

Figure 2

Table 1:Summary of results for as-deposited and annealed (at 300 °C for 5 minutes) Ti/Pt/Au contacts on p-type GaN and GaN/AlxGa1−xN superlattices (x=0.1 and 0.2).

Figure 3

Figure 3.AES depth profile of Ti/Pt/Au contacts after annealing for 5 minutes at 300°C. Inset shows AES depth profile of the as-grown p-type GaN/Al0.2Ga0.8N sample.