Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T19:27:45.046Z Has data issue: false hasContentIssue false

Patterning III-N Semiconductors by Low Energy Electron Enhanced Etching (LE4)

Published online by Cambridge University Press:  13 June 2014

H.P. Gillis
Affiliation:
Department of Chemistry and Biochemistry, UCLA, Los Angeles, CA 90095.
M.B. Christopher
Affiliation:
Department of Chemistry and Biochemistry, UCLA, Los Angeles, CA 90095.
K.P. Martin
Affiliation:
Microelectronics Research Center, Georgia Tech, Atlanta, GA 30332
D.A. Choutov
Affiliation:
Present Address: National Semiconductor, San Jose, CA

Abstract

Fabricating device structures from the III-N wide bandgap semiconductors requires anisotropoic dry etching processes that leave smooth surfaces with stoichiometric composition after transferring high-resolution patterns with vertical sidewalls. The purpose of this article is to describe results obtained by a new low-damage dry etching technique that provides an alternative to the standard ion-enhanced dry etching methods in meeting these demands for processing the III-N materials.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Fig.1.Anisotropic etching of GaN film with SiO2 mask patterned by RIE. The sample was etched in 6.6 Pa of chlorine for 20 minutes at a current density of 150 mA/cm2. (Ref.28)

Figure 1

Fig.2Deep etching of GaN film with SiO2 mask defined by photolithography and wet etching. The sample was etched in 6.6 Pa of chlorine, with current density of 150 ma/cm2.