Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T15:46:49.755Z Has data issue: false hasContentIssue false

The Effect of Al in Plasma-assisted MBE-grown GaN

Published online by Cambridge University Press:  13 June 2014

Otto Zsebök
Affiliation:
Applied Semiconductor Physics Department of Microelectronics and Nanoscience Physics and Engineering Physics Chalmers University of Technology and Göteborg University SE-412 96 Göteborg, Sweden
Jan V. Thordson
Affiliation:
Applied Semiconductor Physics Department of Microelectronics and Nanoscience Physics and Engineering Physics Chalmers University of Technology and Göteborg University SE-412 96 Göteborg, Sweden
Qingxiang Zhao
Affiliation:
Applied Semiconductor Physics Department of Microelectronics and Nanoscience Physics and Engineering Physics Chalmers University of Technology and Göteborg University SE-412 96 Göteborg, Sweden
Ulf Södervall
Affiliation:
Applied Semiconductor Physics Department of Microelectronics and Nanoscience Physics and Engineering Physics Chalmers University of Technology and Göteborg University SE-412 96 Göteborg, Sweden
Lars Ilver
Affiliation:
Applied Semiconductor Physics Department of Microelectronics and Nanoscience Physics and Engineering Physics Chalmers University of Technology and Göteborg University SE-412 96 Göteborg, Sweden
Thorvald G. Andersson
Affiliation:
Applied Semiconductor Physics Department of Microelectronics and Nanoscience Physics and Engineering Physics Chalmers University of Technology and Göteborg University SE-412 96 Göteborg, Sweden

Abstract

We have grown GaN, with addition of a 0.10 to 0.33 % Al, on sapphire(0001) substrates by solid-source RF-plasma assisted MBE. The Al-concentration was determined by secondary ion-mass spectrometry and Auger-electron spectroscopy, while the layer quality was assessed by photoluminescence and high-resolution scanning electron microscopy. Microscopy revealed a meandering pattern and a surface roughness varying with Al-content. The smallest surface roughness was obtained at 0.10 % Al. Photoluminescence revealed two main peaks attributed to the neutral donor-bound exciton. Its energy increased slightly with Al-concentration, which established a correlation between the Al-concentration and the band gap.

Information

Type
Research Article
Copyright
Copyright © 1996 Materials Research Society
Figure 0

Figure 1.Low-temperature photoluminescence spectra for a) pure GaN and b) (Al)GaN with 0.17% Al. Since the spectra clearly contain a low energy tail, especially for GaN, the peaks have been deconvoluted into 4 (Al)GaN or 5 (GaN) Gaussian peaks. The high-energy peaks were assigned to the (D1°,X), (D2°,X) and (A°,X), respectively. Peak A is from the recombination of a free hole with an electron bound on an impurity centre, identified with oxygen, while peak B is related to excitons deeply bound to defect centres at dislocations.

Figure 1

Figure 2.The extracted peak positions as a function of Al-concentration. The lines represent the change of the (D1°,X), (D2°,X) and (A°,X) peaks which is parallel with the increase of the AlGaN-alloy band gap. The dashed line is the PL-peak position, while the dotted line represents the position of peak A.

Figure 2

Figure 3. High-resolution scanning electron microscopy images of the sample surfaces with increasing Al-content from GaN to (Al)GaN with 0.17% Al. In general there is an improvement of the surface morphology with Al-content in the layers.