Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T02:50:59.400Z Has data issue: false hasContentIssue false

Buoyant displacement flows in slightly non-uniform channels

Published online by Cambridge University Press:  22 April 2016

R. Mollaabbasi
Affiliation:
Department of Chemical Engineering, Université Laval, Québec, QC G1V 0A6, Canada
S. M. Taghavi*
Affiliation:
Department of Chemical Engineering, Université Laval, Québec, QC G1V 0A6, Canada
*
†Email address for correspondence: Seyed-Mohammad.Taghavi@gch.ulaval.ca

Abstract

We consider displacement flows in slightly diverging or converging plane channels. The two fluids are miscible and buoyancy is significant. We assume that the channel is oriented close to horizontal. Employing a classical lubrication approximation, we simplify the governing equations to furnish a semi-analytical solution for the flux functions. Then, we demonstrate how the non-uniformity of the displacement flow geometry can affect the propagation of the interface between the heavy and light fluids in time, for various parameters studied, e.g. the viscosity ratio, a buoyancy number and rheological features. By setting the molecular diffusion effects to zero, certain solution behaviours at longer times can be practically predicted through the associated hyperbolic problem, using which it becomes possible to directly compute the interfacial features of interest, e.g. leading and trailing front heights and speeds. For a Newtonian displacement flow in a converging or uniform channel, as the buoyancy number increases from zero, we are able to classify three flow regimes based on the behaviour of the trailing front near the top of the channel: a no-back-flow regime, a stationary interface flow regime, and a sustained back-flow regime. For the case of a diverging channel flow, the sustained back-flow regime is replaced by an eventually stationary interface flow regime. In addition, as the displacement flow progresses, the leading front speed typically increases (decreases) in a converging (diverging) channel, while the opposite is usually true for the front height. For the no-back-flow regime (i.e. with small buoyancy), the solution of the displacement flow at long times in all the geometries considered converges to a similarity form, while no similarity form is found for the other flow regimes. As the displacement flow develops, frontal diffusive effects are reduced (enhanced) in a converging (diverging) channel and multiple fronts are progressively less (more) present in a converging (diverging) channel. Regarding non-Newtonian effects, a shear-thinning fluid displacing a Newtonian fluid exhibits an increasingly fast front that has a short height in a converging channel. When a yield stress is present in the displaced fluid, it is possible to find residual wall layers of displaced fluid that are completely static. These layers disappear at a certain critical downstream distance in a converging channel while they appear at a critical distance in a diverging channel. Finally, the combination of strong buoyant and yield-stress effects can modify the destiny of a second front that follows the leading front.

Information

Type
Papers
Copyright
© 2016 Cambridge University Press 
Figure 0

Figure 1.Schematic of the displacement flow geometry considered. Here ${\it\alpha}$ is negative so that the heavy fluid displaces the light one in a slightly converging channel. For a positive value of ${\it\alpha}$, the channel would be slightly diverging. Note that $|{\it\alpha}|\ll 1$.

Figure 1

Figure 2.Examples of contours of $q$ versus $h$ and $X$ for ${\it\chi}=20$ and $h_{X}=0$, for Newtonian displacements. In each row, ${\it\alpha}$ is fixed: 0 (a–c), $-0.01$ (d–f), 0.01 (g–i). In each column, $m$ is fixed: 0.1 (a,d,g), 1 (b,e,h), 10 (c,f,i).

Figure 2

Figure 3.Examples of contours of $q$ versus $h$ and $X$ for $m=1$, ${\it\chi}=20$ and $h_{X}=0$, for non-Newtonian displacements. In each row, ${\it\alpha}$ is fixed: $-0.01$ (a–d), 0.01 (e–h). In each column, $[n_{H},n_{L},B_{H},B_{L}]$$=$$[0.25,1,0,0]$ (a,e), $[1,0.25,0,0]$ (b,f), $[1,1,20,0]$ (c,g), $[1,1,0,20]$ (d,h).

Figure 3

Figure 4.Dependence of the interface evolution on mesh size in a converging channel: (a) a Newtonian fluid displacing another Newtonian fluid; (b) a Newtonian fluid displacing a yield-stress fluid with $B_{L}=5$ and $n_{L}=1$; (c) a Newtonian fluid displacing a shear-thinning fluid with $n_{L}=0.5$. The other parameters used are ${\it\alpha}=-0.01$, $m=1$, ${\it\chi}=-20$ at $T=35$, with mesh steps $\text{d}X=0.02$ (dash-dotted line), $\text{d}X=0.05$ (dashed line) and $\text{d}X=0.1$ (solid line). The time step is fixed to $dT=0.001$ in all panels. The insets are zoomed at the fronts.

Figure 4

Figure 5.Examples of Newtonian displacements for ${\it\chi}=0$ and $T=0,3,\ldots ,30$. In each row, ${\it\alpha}$ is fixed: 0 (a–c), $-0.01$ (d–f), 0.01 (g–i). In each column, $m$ is fixed: 0.1 (a,d,g), 1 (b,e,h), 10 (c,f,i). The dashed lines illustrate the front height predictions of (4.4) for long times.

Figure 5

Figure 6.Interface evolution in time, $T=0,3,\ldots ,27,30$, for $m=1$. In each row, ${\it\alpha}$ is fixed: 0 (a–c), $-$0.01 (d–f), 0.01 (g–i). In each column, ${\it\chi}$ is fixed: 20 (a,d,g), 70 (b,e,h), 100 (c,f,i). The dashed lines illustrate the front height predictions of (4.4) for long times. For panel (f) only, a very small artificial diffusion has been added to stabilize the numerical method.

Figure 6

Figure 7.Superposition of the interface heights in Newtonian displacements for ${\it\chi}=0$ and $T=3,\ldots ,30$ by plotting $h/(1+{\it\alpha}X)$ as a function of $(X+{\it\alpha}X^{2}/2)/T$ for ${\it\alpha}=-0.01$ (solid line), ${\it\alpha}=0$ (dashed line) and ${\it\alpha}=0.01$ (dash-dotted line): $m=0.1$ (a), 1 (b) and 10 (c). Note that the same parameters as in figure 5 have been used. The insets are for $T=0.3,0.6,\ldots ,3$.

Figure 7

Figure 8.The same as figure 6 but plotted versus the similarity variable.

Figure 8

Figure 9.Local base flow velocity profiles and fluxes in a converging channel (${\it\alpha}=-0.01$) at $X=0$ (solid line), $X=20$ (dashed line) and $X=50$ (dash-dotted line) using the rescaled dimensionless groups for ${\it\chi}^{\ast }=15$, $m^{\ast }=0.1$. (a) Newtonian displacement: local base flow velocity profiles at for $h^{\ast }=0.7$. (b) Newtonian displacement: local fluxes versus $h^{\ast }=h/(1+{\it\alpha}X)$. (c) Non-Newtonian displacement: local base flow velocity profiles for $h^{\ast }=0.7$, $B_{H}^{\ast }=2$, $B_{L}^{\ast }=5$, $n_{H}=n_{L}=0.5$. (d) Non-Newtonian displacement: local fluxes versus $h^{\ast }=h/(1+{\it\alpha}X)$ with the parameters of panel (c). The interface slope is zero in all the panels.

Figure 9

Figure 10.Parameter regime in the ($m,{\it\chi}$) plane in which there exists multiple fronts of displacements (marked by the shaded area). Elsewhere there is only a single front. In each row, ${\it\alpha}$ is fixed: $-$0.01 (a–c), 0.01 (d–f). In each column, $X_{f}$ is fixed: 5 (a,d), 20 (b,e), 50 (c,f). The insets show the interface at different $X_{f}$ for the same ${\it\chi}$ and $m$.

Figure 10

Figure 11.Example front shapes in the moving frame of reference, computed from (4.16) for ${\it\chi}=0$ and $m=1$ at different distances, i.e. $X_{f}=0$ (solid line), $X_{f}=20$ (dashed line) and $X_{f}=50$ (dash-dotted line): ${\it\alpha}=-0.01$ (a), 0 (b), 0.01 (c).

Figure 11

Figure 12.(a) Variation of ${\it\chi}_{es}$ versus $X_{es}$ for large viscosity ratios (i.e. $m=10$) showing the numerical solution of (4.17) and (4.18) (solid line) and (4.20) (dashed line). (b) Variation of ${\it\chi}_{c}$ versus $X_{es}$ for small viscosity ratios (i.e. $m=0.1$) showing the numerical solution of (4.17) and (4.18) (solid line) and (4.21) (dashed line). (c) Variation of ${\it\chi}_{c}$ versus $X_{es}$ for large viscosity ratios (i.e. $m=1$) using (4.19). Black circles show the simulation results. The insets are explained in the text.

Figure 12

Figure 13.Examples showing a shear-thinning fluid displacing a Newtonian fluid for ${\it\chi}=0$, $m=1$ and $T=0,3,\ldots ,30$ for ${\it\alpha}=-0.01$: $n_{H}=0.75$ (a), 0.5 (b), 0.25 (c).

Figure 13

Figure 14.Interface evolution in time for $T=0,3,\ldots ,30$ with $m=1$, ${\it\chi}=0$ and $n_{L}=1$. In each row, ${\it\alpha}$ is fixed: 0 (a–c), $-$0.01 (d–f), 0.01 (g–i). In each column, $B_{L}$ is fixed: 5 (a,d,g), 20 (b,e,h), 40 (c,f,i). The displacing fluid is Newtonian.

Figure 14

Figure 15.Examples of Bingham fluids ($B_{L}=20$, $n_{L}=1$) displaced by Newtonian fluids for ${\it\chi}=200$, $m=1$ and $T=0,3,\ldots ,30$; ${\it\alpha}=0$ (a), $-$0.01 (b), 0.01 (c).

Figure 15

Figure 16.Maximal static residual wall layer thickness, $Y_{static}$, with contours spaced at intervals $Y_{static}=0.05$ for $\tilde{{\it\chi}}=1$ and $n_{H}=1$. In each row, ${\it\alpha}$ is fixed: $-0.01$ (a–c), 0.01 (d–f). In each column, $X$ is fixed: 10 (a,d), 50 (b,e), 90 (c,f).