Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T22:49:14.150Z Has data issue: false hasContentIssue false

Inductively Coupled Plasma Etching of III-Nitrides in Cl2/Xe, Cl2/Ar and Cl2/He

Published online by Cambridge University Press:  13 June 2014

Hyun Cho
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville FL 32611
Y.B. Hahn
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville FL 32611
D.C. Hays
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville FL 32611
K.B. Jung
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville FL 32611
S.M. Donovan
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville FL 32611
C.R. Abernathy
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville FL 32611
S.J. Pearton
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville FL 32611
R.J. Shul
Affiliation:
Sandia National Laboratories, Albuquerque NM 87185

Abstract

The role of additive noble gases He, Ar and Xe to Cl2-based Inductively Coupled Plasmas for etching of GaN, AlN and InN were examined. The etch rates were a strong function of chlorine concentration, rf chuck power and ICP source power. The highest etch rates for InN were obtained with Cl2/Xe, while the highest rates for AlN and GaN were obtained with Cl2/He. Efficient breaking of the III-nitrogen bond is crucial for attaining high etch rates. The InN etching was dominated by physical sputtering, in contrast to GaN and AlN. In the latter cases, the etch rates were limited by initial breaking of the III-nitrogen bond. Maximum selectivities of ∼ 80 for InN to GaN and InN to AlN were obtained.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Figure 1.Effect of chlorine concentration on etch rates of InN (top), AlN (center) and GaN (bottom) with Cl2/He, Cl2/Ar and Cl2/Xe plasma chemistries (750W source power, 250W rf chuck power, 5mTorr).

Figure 1

Figure 2.Effect of rf chuck power on etch rates of InN (top), AlN (center) and GaN (bottom) with 2Cl2/13He, 2Cl2/13Ar and 2Cl2/13Xe plasma chemistries (750W source power, 5mTorr).

Figure 2

Figure 3.Effect of rf chuck power on the ion fluxes generated by capacitive discharge and inductively coupled discharge with 2Cl2/13He, 2Cl2/13Ar and 2Cl2/13Xe plasma chemistries (750W source power, 5mTorr).

Figure 3

Figure 4.Effect of ICP source power on etch rates of InN (top), AlN (center) and GaN (bottom) with 2Cl2/13He, 2Cl2/13Ar and 2Cl2/13Xe plasma chemistries (250W rf chuck power, 5mTorr).

Figure 4

Figure 5.Effect of rf chuck power on the selectivity for InN over GaN and AlN (750W source power, 5mTorr, 2Cl2/13 noble gas).