Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T02:59:06.930Z Has data issue: false hasContentIssue false

Evolution of truncated and bent gravity wave solitons: the Mach expansion problem

Published online by Cambridge University Press:  29 December 2020

Samuel Ryskamp
Affiliation:
Department of Applied Mathematics, University of Colorado, Boulder, CO 80309, USA
Michelle D. Maiden
Affiliation:
Department of Applied Mathematics, University of Colorado, Boulder, CO 80309, USA
Gino Biondini
Affiliation:
Department of Mathematics, State University of New York, Buffalo, NY 14260-2900, USA
Mark A. Hoefer*
Affiliation:
Department of Applied Mathematics, University of Colorado, Boulder, CO 80309, USA
*
†Email address for correspondence: hoefer@colorado.edu

Abstract

The dynamics of initially truncated and bent line solitons for the Kadomtsev–Petviashvili (KPII) equation modelling internal and surface gravity waves is analysed using modulation theory. In contrast to previous studies on obliquely interacting solitons that develop from acute incidence angles, this work focuses on initial value problems for the obtuse incidence of two or three partial line solitons, which propagate away from one another. Despite counterpropagation, significant residual soliton interactions are observed with novel physical consequences. The initial value problem for a truncated line soliton – describing the emergence of a quasi-one-dimensional soliton from a wide channel – is shown to be related to the interaction of oblique solitons. Analytical descriptions for the development of weak and strong interactions are obtained in terms of interacting simple wave solutions of modulation equations for the local soliton amplitude and slope. In the weak interaction case, the long-time evolution of truncated and large obtuse angle solitons exhibits a decaying, parabolic wave profile with temporally increasing focal length that asymptotes to a cylindrical Korteweg–de Vries soliton. In contrast, the strong interaction case of slightly obtuse interacting solitons evolves into a steady, one-dimensional line soliton with amplitude reduced by an amount proportional to the incidence slope. This strong interaction is identified with the ‘Mach expansion’ of a soliton with an expansive corner, contrasting with the well-known Mach reflection of a soliton with a compressive corner. Interestingly, the critical angles for Mach expansion and reflection are the same. Numerical simulations of the KPII equation quantitatively support the analytical findings.

Information

Type
JFM Papers
Copyright
© The Author(s), 2020. Published by Cambridge University Press
Figure 0

Figure 1.Contour plot of a line soliton solution and its slope parametrisation. The soliton propagation slope is $q = \tan \varphi$.

Figure 1

Figure 2.Schematic of Mach (a) and regular (b) reflection of a soliton impinging upon a compressive corner.

Figure 2

Figure 3.(a,c) Diagram of Mach expansion for a front encountering a reverse wedge boundary with small $\varphi$ (a,b) and large $\varphi$ (c,d). Note the emergence of a new, smaller amplitude line soliton along the boundary when $\varphi$ is small. (b,d) Bent soliton initial conditions are identical for the purposes of analysis.

Figure 3

Figure 4.Initial data corresponding to a truncated line soliton (a), a bent-stem soliton (b) and a bent soliton (c).

Figure 4

Figure 5.(a–c) Numerical simulation of partial soliton evolution for $t \in (0,60,300)$. (d,e) Comparison of characteristic speeds of the upper (d) and lower (e) edges of the partial soliton rarefaction wave. The plot displays the predicted front speeds as reference lines (dash-dotted, blue) with slopes from the solution (3.2), the numerically extracted front positions (solid, black) and a least squares linear fit (dashed, red) whose slope determines the measured speeds.

Figure 5

Figure 6.Simple waves and their interaction in the characteristic $Y$–$T$$((y/\ell)-(t/\ell))$ plane for the truncated soliton initial data (3.3). The solid lines are simple wave characteristics. The shaded region corresponds to interacting simple waves bounded by the dashed curves from (3.11).

Figure 6

Figure 7.(a–c) Numerical evolution of truncated soliton initial data (B 6a,b) according to the KPII equation for $t \in (0,150,500)$ and $\ell = 300$. (d,e) Modulated soliton amplitude $a$ and slope $q$ at noted times extracted from the numerical simulation (solid curves) and the modulation solution (3.4a,b), (3.12) (dashed curves) with the slightly different, fitted initial soliton length $\ell = 280$. The dash-dotted blue lines correspond to the long-time asymptotic predictions (3.14) evaluated at $t = 500$.

Figure 7

Figure 8.(a–c) Numerical evolution of the partially bent soliton according to the KPII equation for $t \in (0,150,400)$ and $\sqrt {a_0} = 0.7$, $q_0 = 0.3$. (d,e) Comparison of the characteristic speeds of the upper (d) and lower (e) edges of the partially bent soliton rarefaction wave. The plot displays the predicted front speeds from the modulation solution (4.3) as reference lines (dash-dotted, blue), the numerically extracted front positions from the numerical simulation (solid, black) and a least squares linear fit (dashed, red) whose slope determines the measured speeds.

Figure 8

Figure 9.Characteristic plots of interacting simple waves for the bent-stem soliton initial data (4.4a,b); (a) $0 < a_0 \leqslant \frac {1}{4}$, resulting in an infinite region of interaction for two simple waves in $(y,t)$-plane, (b) $\frac {1}{4} < a_0 < 1$, resulting in a bounded interaction region. See main text for description.

Figure 9

Table 1.Dynamics of the bent-stem soliton initial data (4.4a,b).

Figure 10

Figure 10.(a–c) Numerical simulation of the bent-stem soliton for $\sqrt {a_0}=0.8$ and $q_0=0.2$ with $t \in (0,80,400)$ showing the emergence of a straight line soliton. The interaction region closing time is predicted to be $t = \ell T_{c} = 236$ (cf. figure 9b). (d–f) Numerical simulation of the bent-stem soliton for $\sqrt {a_0}=0.3$ and $q_0=0.7$ with $t \in (0,80,400)$ leading to a decaying parabolic soliton. In both cases, $\ell = 100$.

Figure 11

Figure 11.Comparison between numerical simulation (solid line) and the modulation solution (dashed line) of the bent-stem amplitude decay at $y=0$ for the parameters in figures 10(a) and 10(f). In order to account for the smooth initial data, the modulation solution is ‘fitted’ by choosing $\ell =80$.

Figure 12

Figure 12.Modulation solution phase (dashed) overlaid on contour plots for weakly (a–c) and strongly (d–f) bent-stem initial conditions when $t \in (100,200,400)$. The initial conditions are the same as in figure 10.

Figure 13

Figure 13.Space–time contour plots of amplitude modulation solutions for bent soliton initial data. (a) The strong interaction case (4.15a,b) with $a_0 = 1 > q_0 = 0.3$. (b) The weak interaction case (4.20) with $a_0 = 1 < q_0 = 1.4$. The two cases are similar but note the non-zero central amplitude for strong interaction.

Figure 14

Figure 14.Numerical simulation of bent solitons for the strong interaction when $a_0=1$, $q_0=0.3$ for $t \in (0,150,400)$ in (a–c) and the weak interaction when $a_0=1$, $q_0=1.4$ when $t \in (0,60,220)$ in (d–f).

Figure 15

Figure 15.Modulated soliton amplitude $a$ and slope $q$ extracted from the numerical simulation in the strong interaction case of figure 14(a–c) (solid curves) and the modulation solution (4.17) (dashed curves) at different times.

Figure 16

Figure 16.Comparison of bent-stem soliton modulation with small stem $\ell = 12$ (dashed, red) and no stem $\ell \to 0$ (dash-dotted, blue) to numerical simulation (solid, black) of the weakly interacting bent soliton evolution in figure 14(d–f).

Figure 17

Table 2.Soliton-expansive corner initial-boundary value problem.

Figure 18

Figure 17.Synthetic aperture radar image of internal solitary waves generated at the Columbia River plume front. Reproduced with permission from Pan et al. (2007) copyright 2007 by the American Geophysical Union.

Figure 19

Figure 18.Convergence of Y-shaped soliton (a) in space (b) and time (c). These simulations were run on the domain $[-128,128] \times [-64,64]$ with ${\rm \Delta} x = {\rm \Delta} y$. For (b) we fixed ${\rm \Delta} t = 10^{-3}$, and for (c) we fixed ${\rm \Delta} x = {\rm \Delta} y = 1/4$.

Figure 20

Figure 19.Full initial conditions for simulation of truncated (a) and bent-stem solitons (b), satisfying the constraint $\int u_{yy}\,\mathrm {d} x = 0$.