Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T18:29:10.434Z Has data issue: false hasContentIssue false

Fast Lateral Epitaxial Overgrowth of Gallium Nitride by Metalorganic Chemical Vapor Deposition Using a Two-Step Process

Published online by Cambridge University Press:  13 June 2014

H. Marchand
Affiliation:
ECE Dept., University of California, Santa Barbara, CA 93106
J.P. Ibbetson
Affiliation:
ECE Dept., University of California, Santa Barbara, CA 93106
P.T. Fini
Affiliation:
Materials Department, University of California, Santa Barbara, CA 93106
X.H. Wu
Affiliation:
Materials Department, University of California, Santa Barbara, CA 93106
S. Keller
Affiliation:
ECE Dept., University of California, Santa Barbara, CA 93106
S.P. DenBaars
Affiliation:
Materials Department, University of California, Santa Barbara, CA 93106
J.S. Speck
Affiliation:
Materials Department, University of California, Santa Barbara, CA 93106
U.K. Mishra
Affiliation:
Materials Department, University of California, Santa Barbara, CA 93106

Abstract

We demonstrate a two-step process wherein the lateral epitaxial growth (LEO) of GaN from <100>-oriented stripes is initiated at a low V/III ratio to produce smooth, vertical <110> sidewalls, and where the V/III ratio is subsequently raised in order to increase the lateral growth rate. We find that the formation of the <101> facets is inhibited using this two-step process, and that it is possible to maintain the <110> sidewalls while achieving a large lateral growth rate. The ratio of lateral to vertical growth rate has been increased by up to factor of 2.6 using this approach relative to identical growth conditions without the initiation at low V/III ratio. The effect of lateral growth rate on the structural properties of the stripes is discussed.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Figure 1SEM micrographs of sample A (a: plan view, b: cross-section) and Sample B (c: plan view, d: cross-section) for a fill factor of 0.25. The edges of the mask are indicated by dark markers in (d).

Figure 1

Figure 2Ratio of lateral to vertical growth as a function of fill factor for samples A-D. The lateral growth is defined as the width of the GaN growth above the mask opening. The data points for a given curve are results from a single growth on a sample patterned with the various fill factors. The solid symbols indicate jagged sidewalls (<100> facets).

Figure 2

Figure 3Plan view TEM micrographs of (a) Sample A2 and (b) Sample B2 (bright field, g=210).

Figure 3

Figure 4Room-temperature PL of samples A-D.