Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T02:30:07.024Z Has data issue: false hasContentIssue false

Pulsing in the Ahu‘ail$\bar{{\textbf{a}}}$‘au pond–spillway system during the 2018 K$\unicode{x012B}$lauea eruption: a dynamical systems perspective

Published online by Cambridge University Press:  10 May 2024

David M.R. Hyman*
Affiliation:
Center for the Study of Active Volcanoes, University of Hawai‘i at Hilo, Hilo, HI 96720, USAUS Geological Survey, Cascades Volcano Observatory, Vancouver, WA 98683, USA
Roger P. Denlinger
Affiliation:
US Geological Survey, Cascades Volcano Observatory, Vancouver, WA 98683, USA
Hannah R. Dietterich
Affiliation:
US Geological Survey, Alaska Volcano Observatory, Anchorage, AK 99508, USA
Matthew R. Patrick
Affiliation:
US Geological Survey, Hawaiian Volcano Observatory, Hilo, HI 96720, USA
*
†Email address for correspondence: dhyman@usgs.gov

Abstract

During the 2018 K$\unicode{x012B}$lauea lower East Rift Zone eruption, lava from 24 fissures inundated more than 8000 acres of land, destroying more than 700 structures over three months. Eruptive activity eventually focused at a single vent characterized by a continuously fed lava pond that was drained by a narrow spillway into a much wider, slower channelized flow. The spillway exhibited intervals of ‘pulsing’ behaviour in which the lava depth and velocity were observed to oscillate on time scales of several minutes. At the time, this was attributed to variations in vesiculation originating at depth. Here, we construct a toy fluid dynamical model of the pond–spillway system, and present an alternative hypothesis in which pulsing is generated at the surface, within this system. We posit that the appearance of pulsing is due to a supercritical Hopf bifurcation driven by an increase in the Reynolds number. Asymptotics for the limit cycle near the bifurcation point are derived with averaging methods and compare favourably with the cycle periodicity. Because oscillations in the pond were not observable directly due to the elevation of the cone rim and an obscuring volcanic plume, we model the observations using a spatially averaged Saint-Venant model of the spillway forced by the pond oscillator. The predicted spillway cycle periodicity and waveforms compare favourably with observations made during the eruption. The unusually well-documented nature of this eruption enables estimation of the viscosity of the erupting lava.

Information

Type
JFM Papers
Creative Commons
To the extent this is a work of the US Government, it is not subject to copyright protection within the United States. Published by Cambridge University Press.
Copyright
© U.S. Geological Survey, 2024.
Figure 0

Figure 1.(a) The Ahu‘ailā‘au pond–spillway system on 29 July 2018. The rapid reduction in incandescence past the spillway is due mainly to smoother surface flow conditions limiting the breakup of a thin surface cooling crust (dark grey/silver). Arrow indicates north, view is east. (b) Modelled version of the pond–spillway system with symbols corresponding to those in the text.

Figure 1

Figure 2.(a) Lava level in the spillway at the onset of a pulsing episode from video taken from the spillway monitoring station (Patrick et al.2019c). (b) Spectral power (fast Fourier transform, FFT) of pulsing signals in 1-minute real-time seismic-amplitude measurement from station KLUD, and their average (thick dashed black line). The FFT of pulsing in (a) is shown as a thick red line. Each spectrum is denoted by the midpoint time of its pulsing episode. All times are local (HST).

Figure 2

Figure 3.(a) Real and imaginary parts of the eigenvalues (solid and dashed, respectively) of the three equilibria (with $\sigma = 1$). Colours correspond to equilibria at $(1,1)$ (black), $(\mathcal {H}_+,1)$ (cyan) and $(\mathcal {H}_-,1)$ (magenta). Vertical lines mark the Hopf (black) and pitchfork (green) bifurcations, as well as the transition from unstable node to unstable spiral for $(\mathcal {H}_+,1)$ (cyan) and $(\mathcal {H}_+,1)$ (magenta). (b) Nullclines of $\dot {\mathcal {H}}$ (blue) and $\dot {\mathcal {Q}}$ (red) near the pitchfork bifurcation. Equilibria are colour-coded as in (a). Semi-transparent plane is $\mathcal {Q} = 1$. (c) Schematic flow near the slow manifold (green) after the pitchfork ($b=3.5$, yellow-shaded slice in b). Unstable manifolds are dashed. Trajectories are shown schematically (black).

Figure 3

Figure 4.Summary of the Hopf bifurcation for $a=1.0$. (a–c) Phase portraits for three values (0.4, 0.5, 0.6) of the parameter $b$ showing the flow (grey), example orbits (magenta), the limit cycle (bold, black), the $\mathcal {H}$ and $\mathcal {Q}$ nullclines (blue and red dashed, respectively). Equilibrium stability indicated by marker fill. (d) Same as (c), colour-coded by local cycle speed $\sqrt {\dot {\mathcal {H}}^2+\dot {\mathcal {Q}}^2}$. (e) Dependence of the limit cycle on $b$. (f) Bifurcation diagram showing the $\mathcal {H}$ and $\mathcal {Q}$ cycle extrema (blue and red, respectively), the stable node (black), and the unstable node (dashed black). (g) Comparison of cycle-averaged radius from averaging theory (magenta) and numerical integration (green dots).

Figure 4

Figure 5.Pond limit cycle forcing on spillway dynamics using the parametrization $a=\sigma b$ with $\sigma =0.4$. (a) Limit cycles for various values of the parameter $b$ showing the pond cycles (dotted) and the resulting forced cycles in the spillway (solid). (b) Forced spillway cycles for values of $b$ bracketing the pulsing data of Patrick et al. (2019c). Grey bars represent measurement error. (c) Spillway cycle waveform ($b=0.515$) for comparison with (d) depth and discharge data. All data are scaled using $Q_0=1000\ {\rm m}^{3}\ {\rm s}^{-1}$ and $h_c=5.5$ m.

Figure 5

Figure 6.Reduced dynamics in the limit as $a\rightarrow 0$. (a) Transcritical bifurcation (black) and its ghost (red, blue) due to the saddle–node bifurcation. Curves show stable (solid) and unstable (dashed) nodes for $\mathcal {H}_0=0.99$ (red), $\mathcal {H}_0=1$ (black) and $\mathcal {H}_0=1.01$ (blue). Arrows show the sense of the flow in the vicinity of the saddles and nodes. (b) The saddle–node bifurcation. In the open region, a saddle and a stable node exist. In the grey hatched region, these fixed points disappear, and $\dot {\mathcal {Q}}>0$ only, causing escape to infinity. Red, black and blue vertical lines show values of $\mathcal {H}_0$ in (a).

Figure 6

Figure 7.Effects of including laminar–turbulent transition in a friction model on phase portrait using $(a,b) = (\sigma, 1)\,\gamma \,Re_0^{4/3}$, with $\sigma = 0.4$ and $\gamma =0.0012$: (a) laminar-only and (b) transitional models for $Re_0=100$ ($a=0.22$, $b=0.55$). (c–f) Transitional model for larger Reynolds numbers: (c) $Re_0=150$ ($a=0.38$, $b=0.94$), (d) $Re_0=200$ ($a=0.55$, $b=1.39$), (e) $Re_0=250$ ($a=0.75$, $b=1.87$), (f) $Re_0=300$ ($a=0.95$, $b=2.38$). Nullclines for $\dot {\mathcal {H}}$ (blue) and $\dot {\mathcal {Q}}$ (red) are also shown.