Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T08:18:26.413Z Has data issue: false hasContentIssue false

Characterization of Be-Implanted GaN Annealed at High Temperatures

Published online by Cambridge University Press:  13 June 2014

C. Ronning
Affiliation:
North Carolina State University, Department of Materials Science and Engineering, Box 7919, Raleigh, NC, 27695, USAUniversity of Göttingen, II. Physical Institute, Bunsenstr. 7-9, D-37073 Göttingen, Germany
K.J. Linthicum
Affiliation:
North Carolina State University, Department of Materials Science and Engineering, Box 7919, Raleigh, NC, 27695, USA
E.P Carlson
Affiliation:
North Carolina State University, Department of Materials Science and Engineering, Box 7919, Raleigh, NC, 27695, USA
P.J. Hartlieb
Affiliation:
North Carolina State University, Department of Materials Science and Engineering, Box 7919, Raleigh, NC, 27695, USA
D.B. Thomson
Affiliation:
North Carolina State University, Department of Materials Science and Engineering, Box 7919, Raleigh, NC, 27695, USA
T. Gehrke
Affiliation:
North Carolina State University, Department of Materials Science and Engineering, Box 7919, Raleigh, NC, 27695, USA
R.F. Davis
Affiliation:
North Carolina State University, Department of Materials Science and Engineering, Box 7919, Raleigh, NC, 27695, USA

Abstract

Single crystalline (0001) gallium nitride layers were implanted with beryllium and subsequently annealed within the range of 300-1100 °C for 10-60 minutes under a flux of atomic nitrogen obtained using a rf plasma source. The nitrogen flux protected the GaN surface from decomposition in vacuum at high temperatures. SIMS measurements revealed that no long range diffusion of the implanted Be occurred at 900 or 1100 °C. XRD spectra showed defect-related peaks in the as-implanted samples; these peaks disappeared upon annealing at 900 °C and higher for 10 minutes. Photoluminescence (PL) easurements showed one new line at 3.35 eV which provided strong evidence for the presence of optically active Be acceptors.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Figure 1.SIMS profiles of Be implanted in GaN, unannealed and annealed to 900 °C and 1100 °C for 15 minutes.

Figure 1

Figure 2.XRD 2-axis ω-2θ map of the (0002) GaN peak (A) dirctly after Be implantation with a dose of 2.5×1014 cm−2 and after subsequent annealing to a temperature of 900 °C (B) and 1100 °C (C) for 10 minutes. (Note: contour plots have log-scale).

Figure 2

Figure 3.Photoluminescence spectra measured at 14 K of GaN. Spectra were recorded in the situations: as-grown, as-implanted with Be, and after annealing to several temperatures for different times. The implantation energies were 100 keV and 200 keV and the total implantation dose 5×1013 cm−2.

Figure 3

Figure 4.Fundamental recoveryprocesses in ion implanted GaN and their detection methods as a function of annealing temperature (15 minutes).