Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T22:49:23.153Z Has data issue: false hasContentIssue false

Rapid Thermal Processing of Implanted GaN up to 1500°C

Published online by Cambridge University Press:  13 June 2014

X. A Cao
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, FL 32611, USA
S. J. Pearton
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, FL 32611, USA
R. K. Singh
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, FL 32611, USA
C. R. Abernathy
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, FL 32611, USA
J. Han
Affiliation:
Sandia National Laboratories, Albuquerque, NM 87185, USA
R. J. Shul
Affiliation:
Sandia National Laboratories, Albuquerque, NM 87185, USA
D. J. Rieger
Affiliation:
Sandia National Laboratories, Albuquerque, NM 87185, USA
J. C. Zolper
Affiliation:
Office of Naval Research, Arlington, VA 22217, USA
R. G. Wilson
Affiliation:
Consultant, Stevenson Ranch, CA 91381, USA
M. Fu
Affiliation:
Micropyretics Heaters International, Inc. Cincinnati, OH 45215, USA
J. A. Sekhar
Affiliation:
Micropyretics Heaters International, Inc. Cincinnati, OH 45215, USA
H. J. Guo
Affiliation:
Micropyretics Heaters International, Inc. Cincinnati, OH 45215, USA
S. J. Pennycook
Affiliation:
Oak Ridge National Laboratory, Solid State Division, Oak Ridge, TN 37831,USA

Abstract

GaN implanted with donor(Si, S, Se, Te) or acceptor (Be, Mg, C) species was annealed at 900-1500 °C using AlN encapsulation. No redistribution was measured by SIMS for any of the dopants and effective diffusion coefficients are ≤2 × 10−13 cm2. s−1 at 1400 °C, except Be, which displays damage-enhanced diffusion at 900 °C and is immobile once the point defect concentration is removed. Activation efficiency of ∼90% is obtained for Si at 1400 °C. TEM of the implanted material shows a strong reduction in lattice disorder at 1400-1500 °C compared to previous results at 1100 °C. There is minimal interaction of the sputtered AlN with GaN under our conditions, and it is readily removed selectively with KOH.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Fig. 1.(a) TEM plan view and (b) selected area diffraction pattern from Si+ implanted GaN (5×1015cm−2, 150 keV) after 1100 °C, 10 sec annealing.

Figure 1

Fig. 2.(a) TEM plan view and (b) selected area diffraction pattern from Si+ implanted GaN (5×1015cm−2, 150 keV) after 1400 °C, 10 sec annealing.

Figure 2

Fig. 3.Arrhenius plot of sheet electron density in S+ (top) or Te+ (bottom) implanted GaN versus annealing temperature.

Figure 3

Fig. 4.Sheet carrier densities in Mg+ or C+ implanted GaN as a function of annealing temperature.