Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T04:04:47.143Z Has data issue: false hasContentIssue false

The trilobite assemblage of the Declivolithus Fauna (lower Katian, Ordovician) of Morocco: a review with new data

Published online by Cambridge University Press:  15 January 2024

Sofia Pereira*
Affiliation:
Universidade de Coimbra, Centro de Geociências, Departamento de Ciências da Terra, Coimbra, Portugal
Isabel Rábano
Affiliation:
CN Instituto Geológico y Minero de España - CSIC, Ríos Rosas 23, 28003 Madrid, Spain
Juan Carlos Gutiérrez-Marco
Affiliation:
Instituto de Geociencias (CSIC, UCM) and Área de Paleontología GEODESPAL, Facultad de Ciencias Geológicas, Universidad Complutense de Madrid, José Antonio Novais 12, 28040 Madrid, Spain
*
*Corresponding author.

Abstract

Intense commercial exploitation of fossils in the famous El Qaid Errami area in the last 20 years has led to the discovery of the interesting Declivolithus Fauna in the Moroccan Anti-Atlas. This unusually large trinucleid trilobite, described originally from the Czech Republic, is the most conspicuous element of an assemblage mainly occurring in the Bofloss locality, a local biofacies development of pelagic mudstones and sandstones cropping out in a structurally isolated place in the Tizi n'Ounfite area. Here we revise this Declivolithus Fauna trilobite assemblage from Morocco, increasing the known trilobite diversity from four to 11 species: Ulugtella? biformis n. sp., Selenopeltis cf. S. vultuosa, Phacopidina quadrata, Eudolatites cf. E. bondoni, Prionocheilus cf. P. verneuili, Nobiliasaphus cf. N. kumatox, Cyclopyge cf. C. rediviva, Symphysops stevaninae, Heterocyclopyge sp., Dionide sp., and Declivolithus alfredi. The new data and the very good preservation of specimens in sandstones, clarify the specific identity of previously reported taxa. Although the stratigraphical correlation of the fossiliferous levels remains problematic, it probably corresponds to the upper part of the Lower Ktaoua Formation or to the lower half of the Upper Tiouririne Formation. Most taxa support previous assignment of the Moroccan assemblage to the late Berounian (ca. early Katian, Ka2), although a middle Berounian (ca. Sa2–Ka1) age cannot be excluded. Most of the identified species are known from the Czech Republic (eight out of 11), showing that the strong faunal link between Morocco and the Czech Republic still existed during the Late Ordovician, being stronger than the link with the coeval Ibero-Armorican domain faunas.

UUID: http://zoobank.org/3e6e55c7-168d-4008-98ba-38a795581ca3

Information

Type
Articles
Copyright
Copyright © The Author(s), 2024. Published by Cambridge University Press on behalf of Paleontological Society
Figure 0

Figure 1.Sketch maps showing the position of the examined localities with reference to the African continent (1), the main Moroccan tectonosedimentary basins (2), and a local map from the northwestern Tafilalt area, SE Morocco (3). Localities (a) and (b) in map (2) correspond to the early finds of the trilobite genus Declivolithus in the Skoura inlier of the central High Altas (Destombes, 1971) and to the study area, respectively. The map (3) is a detail of the position of the fossiliferous localities mentioned in the text with reference to the road and drainage network, main populations, and geodesic vertices. The outline of Jbel Tijarfaïouine, the mountains where Declivolithus was first reported in the Eastern Anti-Atlas, is highlighted in gray. Fossil localities: (A) Bofloss; (B) Tifrit n'Ougnaou; (C) erroneous placement of the type locality of Declivolithus titan in the Jbel Tijarfaïouine according to Fortey and Edgecombe (2017); (D) Tizi n'Mouri; (E) erroneous placement of the Tifrit n'Ougnaou trilobite and echinoderm locality according to Lebrun (2018, p. 138). Abbreviations for other elements of the hydrological and drainage network: A. Oui = Assif n'Ouinigui; A. Ouk = Assif n'Oukhit; A. Out = Assif n'Outaouch; A. Tif = Assif Tifersiguet; OBA = Oued Bou Azgar; OBT = Oued Bou Terga; OGb = Oued Gbis; O. Gou = Oued Gounat; O. Ha = Oued Hanich; O. Si = Oued Signit; O. Tag = Oued Tagueroumt. Map and place names adapted from the sheets n° NH-30-XX-1, Misissi (published/edited in 1968) and NH-30-XX-2, Erfoud (published/edited in 1970) of the Topographic Map of Morocco at a scale of 1:100,000.

Figure 1

Figure 2.(1–8) Ulugtella? biformis n. sp., from the Bofloss locality, Morocco. (1‒3) Exoskeleton, internal mold, holotype, MGM-7666X: (1) dorsal view; (2) left lateral view; (3) anterior view. (4) Exoskeleton, internal mold, paratype, MGM-7667X: dorsal view. (5) Exoskeleton, internal mold, paratype, MGM-7668X: dorsal view. (6) Exoskeleton, internal mold, paratype, MGM-7669X: dorsal view. (7, 8) Exoskeleton, paratype, MGM-7670X: (7) external mold of the left librigena; (8) latex cast of the external mold, MGM-7670X-1: dorsal view. (9) Hypostome, internal mold, paratype, MGM-7671X-1: ventral view. Specimens (1–3) and (9) are preserved in full relief (sandstones); the remaining specimens are preserved in mudstones, flattened. Scale bars = 5 mm.

Figure 2

Figure 3.(1, 2) Selenopeltis cf. S. vultuosa Přibyl and Vaněk, 1966, from the Bofloss locality, Morocco. (1) Cranidium, internal mold, MGM-7673X: dorsal view; (2) left librigena, latex cast of the external mold, MGM-7674X-1. (3–15) Phacopidina quadrata (Hawle and Corda, 1847) from the Bofloss locality, Morocco. (3) Cephalon, internal mold, MGM-7675X: dorsal view; (4, 9, 10) cephalon, internal mold, MGM-7676X: (4) frontal view showing frontal lobe auxiliary impressions; (9) dorsal view; (10) right lateral view; (5, 6) cephalon, internal mold, MGM-7677X: (5) dorsal view; (6) left lateral view; (7, 8) cephalon, internal mold, MGM-7678X: (7) dorsal view; (8) left lateral view; (11, 12, 15) cephalon, internal mold, MGM-7679X: (11) dorsal view; (12) left lateral view; (15) anterior view; (13, 14) cephalon, latex cast of the external mold, MGM-7680X: (13) dorsal view; (14) right lateral view. All specimens are preserved in full relief (sandstones). Scale bars = 5 mm.

Figure 3

Figure 4.(1–6) Phacopidina quadrata (Hawle and Corda, 1847) from the Bofloss locality, Morocco. (1–3) Cephalon, internal mold, MGM-7681X: (1) dorsal view; (2) ventral view; (3) anterior view; (4) cephalon and cephalic doublure, internal molds, dorsal and ventral views, MGM-7689X-1 and 7689X-2, respectively; (5) pygidium, internal mold, MGM-7690X: dorsal view; (6) pygidium, latex cast of the external mold, MGM-7674X-3: dorsal view. (7) Prionocheilus cf. P. verneuili Rouault, 1847, incomplete cephalon with thorax, latex cast of the external mold, MGM-7703X: dorsal view. (8, 9) Nobiliasaphus cf. N. kumatox Šnajdr, 1982a, pygidium, internal mold (field photograph): (8) dorsal view; (9) detail of the axis. All specimens are preserved in full relief (sandstones), except specimen (8, 9), preserved in mudstone. Scale bars = 5 mm.

Figure 4

Figure 5.(1–17) Eudolatites cf. E. bondoni Destombes, 1972, from the Bofloss locality, Morocco. (1–3) Cephalon, internal mold, MGM-7692X: (1) dorsal view; (2) right lateral view; (3) anterior view; (4, 5) incomplete cephalon, latex cast of the external mold, MGM-7696X-1: (4) left lateral view; (5) dorsal view; (6, 7) cephalon, internal mold, MGM-7693X: (6) dorsal view; (7) right lateral view; (8) cephalon, internal mold, MGM-7694X: detail of the frontal lobe showing auxiliary impressions; (9) hypostome, internal mold, MGM-7702X: ventral view; (10–12) pygidium, internal mold, MGM-7697X: (10) dorsal view; (11) posterior view; (12) right lateral view; (13) pygidium, internal mold, MGM-7699X: dorsal view; (14) pygidium, internal mold, MGM-7700X: dorsal view; (15) pygidium, latex cast of the external mold, MGM-7701X: dorsal view; (16, 17) pygidium, internal mold, MGM-7696X-2: (16) dorsal view; (17) left lateral view. All specimens are preserved in full relief (sandstones), except specimens (13–15), which are preserved in mudstones (flattened). Scale bars = 5 mm.

Figure 5

Figure 6.(1–6) Cyclopyge cf. C. rediviva (Barrande, 1846) from the Bofloss locality, Morocco. (1) Two exoskeletons, latex cast of internal (MGM-7704X-1a, left) and external (MGM-7704X-2a, right) molds: dorsal view, showing traces of the visual surfaces; (2) exoskeleton (center), meraspis thorax with pygidium (upper left) and cephalon (lower right), internal and external molds, MGM-7705X-1, MGM-7705X-3, and MGM-7705X-2, respectively: dorsal and anterior views; (3–5) exoskeleton, internal mold, MGM-7706X: (3) dorsal view; (4) anterior view; (5) right lateral view; (6) visual surface and cephalic doublure, latex cast of the external mold, MGM-7707Xa: anteroventral view. Specimens (3–5) are preserved in full relief (sandstones); the remaining specimens are preserved in mudstones, flattened. Scale bars = 5 mm.

Figure 6

Figure 7.(1–11) Cyclopyge cf. C. rediviva (Barrande, 1846) from the Bofloss locality, Morocco. (1) Exoskeleton, internal mold, MGM-7708X: dorsal view; (2) exoskeleton, internal mold, MGM-7709X: dorsal view; (3) exoskeleton, latex cast of the external mold, MGM-7710Xa: dorsal view; (4–6) cephalon, internal mold, MGM-7711X: (4) dorsal view; (5) right lateral view; (6) anterior view; (7) cephalon, internal mold, MGM-7712X-1: anterior view; (8) visual surface and cephalic doublure, internal mold, MGM-7712X-2: anteroventral view; (9, 10) visual surface and cephalic doublure, internal mold, MGM-7713X: (9) anteroventral view; (10) anterior view; (11) thorax with pygidium, internal mold, MGM-7714X: dorsal view. Specimens (1–2) and (11) are preserved in mudstones, flattened; the remaining are preserved in full relief (sandstones). Scale bars = 2 mm.

Figure 7

Figure 8.(1–10) Symphysops stevaninae Lopéz-Soriano and Corbacho, 2012, from the Bofloss locality, Morocco. (1) Exoskeleton, internal mold, MGM-7731X: dorsal view; (2) exoskeleton, latex cast of the external mold, MGM-7732X: dorsal view; (3) incomplete cephalon with thorax, internal mold, MGM-7739X: dorsal view; (4) thorax with pygidium, latex cast of the external mold, MGM-7691X: dorsal view; (5, 6) cranidium, latex cast of the external mold, MGM-7733X: (5) dorsal view; (6) anterior view; (7) cranidium, internal mold, MGM-7734X: dorsal view, (8) pygidium, internal mold, MGM-7740X: dorsal view; (9, 10) cranidium, internal mold, MGM-7735X: (9) dorsal view; (10) left lateral view. Specimens (1–4) are preserved in mudstones, flattened; the remaining specimens are preserved in full relief (sandstones). Scale bars = 5 mm.

Figure 8

Figure 9.(1–4) Symphysops stevaninae Lopéz-Soriano and Corbacho, 2012, from the Bofloss locality, Morocco. (1, 2) Visual surface and cephalic doublure, internal mold, MGM-7737X: (1) ventral view; (2) anterior view; (3, 4) visual surface and cephalic doublure, latex cast of the external mold, MGM-7738X: (3) oblique ventral view; (4) oblique left anteroventral view. (5) Dionide sp. from the Bofloss locality, Morocco. Incomplete cephalon with thorax, internal mold, MGM-7671X-2: dorsal view. All specimens preserved in full relief (sandstones). Scale bars = 5 mm.

Figure 9

Figure 10.(1–6) Declivolithus alfredi (Želízko, 1906) from the Bofloss locality, Morocco. (1) Exoskeleton (molting configuration), internal mold, MGM-7742X: dorsal and ventral (lower lamella) views; (2, 3) incomplete cephalon with thorax, latex cast of the external mold, MGM-7743X: (2) dorsal view; (3) detail of the external sculpture of the left genal lobe; (4–6) exoskeleton (upper lamella missing), dental plaster replica of the internal mold, MGM-7744X-R: (4) dorsal view; (5) dorsoposterior view; (6) oblique left anterolateral view. Specimens (1, 2) are preserved in mudstones, flattened; specimen (4–6) preserved in full relief (sandstone). Scale bars = 5 mm.

Figure 10

Figure 11.(1–10) Declivolithus alfredi (Želízko, 1906) from the Bofloss locality, Morocco. (1) Exoskeleton, latex cast of the external mold, MGM-7745X: dorsal view; (2) incomplete thorax with pygidium, latex cast of the external mold, MGM-7765X: dorsal view; (3–6) cephalon, internal mold (lower lamella missing), MGM-7749X: (3) dorsal view; (4) left lateral view; (5) anterior view; (6) right lateral view; (7–9) cephalon (fringe missing), internal mold, MGM-7750X: (7) dorsal view; (8) oblique right posterolateral view; (9) anterior view; (10) meraspis cephalon, latex cast of the external mold, MGM-7771X: dorsal view. All specimens are preserved in full relief (sandstones), except specimen (1), preserved in mudstone, flattened. Scale bars = 5 mm, except (10) = 2 mm.

Figure 11

Figure 12.(1–12) Declivolithus alfredi (Želízko, 1906) from the Bofloss locality, Morocco. (1–3) Cephalon, internal mold, MGM-7751X: (1) dorsal view; (2) anterodorsal view; (3) left lateral view; (4, 5) lower lamella of the fringe, internal mold, MGM-7761X: (4) ventral view; (5) oblique right ventrolateral view; (6) cephalon (upper lamella missing), internal mold, MGM-7752X: dorsal view; (7) incomplete cephalon (left genal lobe and posterior left part of the fringe), internal mold, MGM-7753X: dorsal view; (8) incomplete cephalon, latex cast of the external mold, MGM-7754X: anterodorsal view; (9) pygidium, latex cast of the external mold, MGM-7768X: dorsoposterior view. (10–12) Pygidium, internal mold, MGM-7767X-1: (10) dorsal view; (11) posterior view; (12) right lateral view. All specimens are preserved in full relief (sandstones), except specimen (9), preserved in mudstone, flattened. Scale bars = 5 mm.