Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T18:17:47.621Z Has data issue: false hasContentIssue false

Effects of Surface Preparation on Epitaxial GaN on 6H-SiC Deposited Via MOCVD

Published online by Cambridge University Press:  13 June 2014

Z. Y. Xie
Affiliation:
Department of Chemical Engineering, Kansas State University, Manhattan, KS 66506
C. H. Wei
Affiliation:
Department of Chemical Engineering, Kansas State University, Manhattan, KS 66506
L. Y. Li
Affiliation:
Department of Chemical Engineering, Kansas State University, Manhattan, KS 66506
J. H. Edgar
Affiliation:
Department of Chemical Engineering, Kansas State University, Manhattan, KS 66506
J. Chaudhuri
Affiliation:
Department of Mechanical Engineering, Wichita State University, Wichita, KS 67208
C. Ignatiev
Affiliation:
Department of Mechanical Engineering, Wichita State University, Wichita, KS 67208

Abstract

A comparison was made of 6H-SiC surfaces etched with H2, C2H4/H2, and HCl/H2, and the resulting crystal quality of epitaxial GaN films deposited on these substrates. To remove the many fine scratches and to smooth the rough surfaces typical of commercial SiC substrates, the Si-face 6H-SiC substrates were etched in H2, C2H4/H2, and HCl/H2 at 145 °C. GaN was subsequently deposited on these etched surfaces after first depositing a low temperature GaN buffer layer via metalorganic chemical vapor deposition (MOCVD). The surface morphologies after etching and after GaN deposition were characterized by atomic force microscopy and Normaski differential interference contrast microscopy, while the crystal quality of the GaN films was assessed by double crystal x-ray rocking curves and x-ray topography. 6H-SiC substrate surfaces were improved in terms of the removal of scratches and the reduction of surface roughness, and both surface morphology and crystal quality of the subsequently deposited GaN films were enhanced. However, the dislocation density was not decreased by the surface etching. The best GaN film was produced by etching the substrate in pure H2 for 40 minutes before growth. Recommendations for the optimum substrate treatment are made.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Figure 1.AFM images of 6H-SiC substrates, (a) as-received, no treatment, (b) after H2 etching for 10 mins, (c) after H2 etching for 40 mins, (d) after 0.5 % HCl/H2 etching for 10 mins.

Figure 1

Figure 2.NDIC images of GaN films grown on 6H-SiC substrates, (a) as-received, no treatment, (b) after H2 etching for 40 mins. Magnification: 200X

Figure 2

Figure 3.NDIC images of GaN film surfaces, (a) incomplete coalescence of GaN film separated by the substrate scratches, (b) the GaN film surface was disturbed by the scratches. Magnification: 400X.