Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T15:44:35.514Z Has data issue: false hasContentIssue false

Inertial effects in dusty Rayleigh–Taylor turbulence

Published online by Cambridge University Press:  07 September 2021

Marta Magnani*
Affiliation:
Dipartimento di Fisica and INFN, Università di Torino, Via P. Giuria 1, 10125 Torino, ItalyIstituto di Geoscienze e Georisorse, CNR, Via Valperga Caluso 35, 10125 Torino, Italy
Stefano Musacchio
Affiliation:
Dipartimento di Fisica and INFN, Università di Torino, Via P. Giuria 1, 10125 Torino, Italy
Guido Boffetta
Affiliation:
Dipartimento di Fisica and INFN, Università di Torino, Via P. Giuria 1, 10125 Torino, Italy
*
†Email address for correspondence: marta.magnani@edu.unito.it

Abstract

We investigate the dynamics of a dilute suspension of small, heavy particles superposed on a reservoir of still, pure fluid. The study is performed by means of numerical simulations of the Saffman model for a dilute particle suspension (Saffman, J. Fluid Mech., vol. 13, issue 1, 1962, pp. 120–128). In the presence of gravity forces, the interface between the two phases is unstable and evolves in a turbulent mixing layer which broadens in time. In the case of negligible particle inertia, the particle-laden phase behaves as a denser fluid, and the dynamics of the system recovers to that of the incompressible Rayleigh–Taylor set-up. Conversely, particles with large inertia affect the evolution of turbulent flow, delaying the development of turbulent mixing and breaking the up–down symmetry within the mixing layer. The inertial dynamics also leads to particle clustering, characterised by regions with higher particle density than the initial uniform density, and by the increase of the local Atwood number.

Information

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Table 1.Stokes time $\tau$, kinematic viscosity $\nu$, number of mesh points along vertical $N_z$ and number of realisations $N_s$ for each set of the three-dimensional simulations. The horizontal number of mesh points are $N_x=N_y=N_z/4$. Regularisation terms are $\nu _p = K = \nu$.

Figure 1

Figure 1.Growth rate of the linear instability $\gamma (k)$ for (a) three values of Stokes time at mass loading $\varPhi _m=0.2$ and fluid kinematic viscosity $\nu = 5 \times 10^{-4}$ and (b) for three values of mass loading at relaxation time $\tau =0.08 T$ and fluid kinematic viscosity $\nu = 2 \times 10^{-3}$. The black dashed line in (a) represents the Boussinesq viscous upper bound for the growth rate $\gamma (k)=\sqrt {Agk+(\nu k^2)^2}-\nu k^2$.

Figure 2

Figure 2.Vertical section of the number density field $\theta$ at $t=[25,35, 40, 48] T$ (from left to right). (a) $\tau =0.008 T$. (b) $\tau =0.08 T$. The colour scale represents the intensity of the particle density field, $\theta$: initial uniform density ($\theta =1$) in light blue, absence of particles ($\theta =0$) in black and large density values ($\theta > 1$) in yellow and red.

Figure 3

Figure 3.Vertical profile of the number density field $\bar {\theta }(z,t)$ for (a) $\tau =0.008 T$, (b) $\tau =0.08 T$ and (c) $\tau =0.2 T$ at different times, together with (d) a zoom of the case $\tau =0.2 T$ for large $\bar {\theta }(z,t)$.

Figure 4

Figure 4.(a) Evolution of the width of the mixing layer for different Stokes times $\tau =0.008T$ (red triangles) $\tau =0.08T$ (blue dots, with kinematic viscosity $\nu =2\times 10^{-3}$; and black diamonds, with $\nu =1 \times 10^{-3}$) and $\tau =0.2 T$ (green squares). Points correspond to ensemble average and error bars are ensemble standard deviation. (b) Width of the upper, positive $h_+(t)$ (solid lines) and lower, negative $h_-(t)$ (dashed lines) regions of the mixing layer (line styles as in left panel).

Figure 5

Figure 5.(a) Horizontal r.m.s. velocity of the fluid phase, $u_{xrms}$ for $\tau =0.008 T$ (solid red line, $t=48T$), $\tau =0.08 T$ (dotted blue line, $t=48T$) and $\tau =0.2 T$ (dashed green line, $t=52T$). Times correspond to the longest time represented in figure 3 as blue lines. The black vertical line is the central height of the mixing layer width. (b) Vertical r.m.s. velocity of the fluid phase, $u_{zrms}$ (line styles and times as in the left panel).

Figure 6

Figure 6.(a) The p.d.f. of the normalised particle density field, $\theta$, computed over the mixing layer for $\tau =0.008 T$ (solid red line), $\tau =0.08 T$ (dotted blue line) and $\tau =0.2 T$ (dashed green line) at the end of the simulation $t_f$, corresponding to $t=48 T$ for $\tau =0.008T$ and $\tau =0.08T$ (right panels of figure 2) and $t=54T$ for $\tau =0.2T$. Inset: Integral of $p(\theta )$ over $\theta >1$. (b) Mean product of the fluctuations of the density $\theta '$ and vertical velocity $v_z'$, averaged within the mixing layer for $\tau =0.008 T$ (red line with triangles), $\tau =0.08 T$ (blue line with circles) and $\tau =0.2 T$ (green line with squares).