Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T11:49:30.831Z Has data issue: false hasContentIssue false

Doping of AlGaN Alloys

Published online by Cambridge University Press:  13 June 2014

Chris G. Van de Walle
Affiliation:
Xerox Palo Alto Research Center, 3333 Coyote Hill Road, Palo Alto, CA 94304
C. Stampfl
Affiliation:
Fritz-Haber-Institut der Max-Planck-Gesellschaft, Faradayweg 4-6, D-14 195 Berlin-Dahlem, Germany
J. Neugebauer
Affiliation:
Fritz-Haber-Institut der Max-Planck-Gesellschaft, Faradayweg 4-6, D-14 195 Berlin-Dahlem, Germany
M. D. McCluskey*
Affiliation:
Xerox Palo Alto Research Center, 3333 Coyote Hill Road, Palo Alto, CA 94304
N. M. Johnson
Affiliation:
Xerox Palo Alto Research Center, 3333 Coyote Hill Road, Palo Alto, CA 94304
*
aPresent address: Department of Physics, Washington State University, P.O. Box 642814, Pullman, WA 99164-2814

Abstract

Nitride-based device structures for electronic and optoelectronic applications usually incor-porate layers of Alx Ga1−x N, and n- and p-type doping of these alloys is typically required. Experimental results indicate that doping efficiencies in Alx Ga1−x N are lower than in GaN. We address the cause of these doping difficulties, based on results from first-principles density-functional-pseudopotential calculations. For n-type doping we will discuss doping with oxygen, the most common unintentional donor, and with silicon. For oxygen, a DX transition occurs which converts the shallow donor into a negatively charged deep level. We present experimental evidence that oxygen is a DX center in Alx Ga1−x N for x>∼0.3. For p-type doping, we find that compensation by nitrogen vacancies becomes increasingly important as the Al content is in-creased. We also find that the ionization energy of the Mg acceptor increases with alloy composition x. To address the limitations on p-type doping we have performed a comprehensive investigation of alternative acceptor impurities; none of the candidates exhibits characteristics that surpass those of Mg in all respects.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Figure 1:Formation energies as a function of Fermi level for defects and impurities relevant for n-type AlN, obtained from first-principles calculations for the zinc-blende phase, and assuming Al-rich conditions.

Figure 1

Figure 2:Configuration coordinate diagram for oxygen displacements along [0001] in AlGaN, based on first-principles calculations for GaN:O and AlN:O. Eopt is the optical ionization energy; Ecand Ee are the capture and emission barriers.

Figure 2

Figure 3:Formation energies as a function of Fermi level for defects and impurities relevant for p-type AlN, obtained from first-principles calculations for the zinc-blende phase, and assuming Al-rich conditions. We note that the formation energy of Ali is significantly higher in wurtzite AlN.