Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T12:45:06.263Z Has data issue: false hasContentIssue false

Theoretical analysis on the transient ignition of a premixed expanding flame in a quiescent mixture

Published online by Cambridge University Press:  11 August 2021

Dehai Yu
Affiliation:
SKLTCS, CAPT, BIC-ESAT, Department of Mechanics and Engineering Science, College of Engineering, Peking University, Beijing 100871, PR China
Zheng Chen*
Affiliation:
SKLTCS, CAPT, BIC-ESAT, Department of Mechanics and Engineering Science, College of Engineering, Peking University, Beijing 100871, PR China
*
† Email address for correspondence: cz@pku.edu.cn

Abstract

The ignition of a self-sustained premixed expanding flame constitutes a crucial problem in fundamental combustion research. In this work, a transient formulation on the forced ignition of a premixed expanding spherical flame in a quiescent mixture is proposed under the framework of the thermal-diffusive model. The present theory considers the unsteady evolution of the temperature and fuel mass fraction distributions subject to finite duration central heating. It can determine both critical heating power and minimum ignition energy for successful ignition. The transient flame initiation process is found to consist of four stages, including fast establishment of the ignition kernel, ignition-energy-supported flame kernel propagation, unsteady transition of the flame kernel, and quasi-steady spherical flame propagation. The unsteady effects lead to the observation of flame kernel establishing stage and considerably affect the subsequent flame kernel development by altering the flame propagation speed. Time scale analysis indicates that the transient formulation completely degenerates to the quasi-steady theory in the limits of both stationary flame ball and planar flame. Previous quasi-steady theory shows that the critical heating power for successful ignition is proportional to the cube of the critical flame radius. However, that scaling relation shall be revised in the transient formulation due to the unsteady thermal conduction from heating centre to flame front. The memory effect that persistently supports flame propagation subsequent to switching off the central heating is examined. It is found that as the heating power grows, the memory effect becomes increasingly important, and it can greatly reduce the predicted minimum ignition energy.

Information

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Figure 1.Change of flame propagation speed with flame radius for different Lewis numbers. The solid and dashed lines represent results from transition formulation and quasi-steady theory, respectively. The mixture's Lewis number $(Le = 0.5,\; 1.0,\; 2.0)$ is indicated by the colour (black/red/blue) of lines. Here ${R_Z}$ and ${R_c}$, respectively, denote the flame ball radius and critical radius for flame initiation.

Figure 1

Figure 2.Profiles of temperature and mass fraction of the deficient reactant determined by transient formulation (solid lines) and quasi-steady theory (dashed lines) for $R = 2$, $Le = 1$ and ${Q_m} = 0$.

Figure 2

Figure 3.Profiles of temperature and mass fraction of the deficient reactant determined by transient formulation (solid lines) and quasi-steady theory (dashed lines) for $R = 2$, $Le = 1$ and ${Q_m} = 0.1$.

Figure 3

Figure 4.Change of flame propagation speed with flame radius for different central heating powers. The solid lines are solutions from the transient formulation, while the dashed lines are results from quasi-steady theory. The heating powers are indicated by colours of the solid/dashed lines: (a) black for$\; {Q_m} = 0.05$, red for ${Q_m} = 0.06$ and blue for$\; {Q_m} = 0.07$; (b) black for$\; {Q_m} = 1.0$, red for$\; {Q_m} = 2.0$ and blue for$\; {Q_m} = 2.5$. Here ${R_Z}$ and ${R_c}$, respectively, denote the flame ball radius and critical radius for flame initiation.

Figure 4

Figure 5.Change of flame propagation speed with flame radius for different initial flame kernel radius of R0=0.01, 0.1 and 1.0. The solid lines are solutions from the transient formulation, while the dashed lines are results from quasi-steady theory. The Lewis number is 2.0 and the central heating power is ${Q_m} = 2.5$.

Figure 5

Figure 6.Temporal evolution of the temperature distributions during different ignition stages: (a) stage I for fast establishment of the ignition kernel, (b) stage II for ignition-energy-supported flame kernel propagation and (c) stage III for unsteady transition of the flame kernel and stage IV for quasi-steady spherical flame propagation. The Lewis number is $Le = 2.0$ and the central heating power is ${Q_m} = 2.5$. The circles represent flame temperature and flame radius. The distributions for the mass fraction of the deficient reactant are also shown in panel (c).

Figure 6

Figure 7.The change of flame ball radii, $R_Z^ - $ and $R_Z^ + $, and the minimum distance between two branches of U–R diagrams, $\varLambda $, with the central heating power for different Lewis numbers of $Le = 1,\; 1.5,\;\textrm{and}\;2$.

Figure 7

Figure 8.Change of critical heating power and critical ignition radius with the Lewis number. The solid lines are solutions from the transient formulation, while the dashed lines are results from quasi-steady theory.

Figure 8

Figure 9.Change of critical heating power with the cube of critical ignition radius. The symbols represent results from quasi-steady theory or transient formulation, and the lines represent the scaling relationship of ${Q_{cr}}\sim R_{cr}^3$.

Figure 9

Figure 10.Change of flame propagation speed with flame radius for different ignition power and duration time. The Lewis number is $Le = 2$. The circles/squares represent the flame radius at the moment of external heating switching off, i.e. $t = {t_h}$, for successful/failing flame initiation.

Figure 10

Figure 11.Temporal evolution of the temperature distributions for ${Q_m} = 3$ and $Le = 2$. The heating duration is (a) ${t_h} = 33.3$ and (b) ${t_h} = 150$. The thick lines correspond to $t = {t_h}$, while the thin lines denote the moments thereafter. The red and blue lines represent temperature in the burnt and unburned regions, respectively.

Figure 11

Figure 12.Change of the MIE with heating power for different Lewis numbers. The solid lines represent ${E_{min}}$ determined by the transient formulation with memory effect, while the dashed lines stand for ${E^{\prime}_{min}}$ predicted by the quasi-steady theory without considering memory effect.