Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T02:36:41.514Z Has data issue: false hasContentIssue false

Dynamics of poles in two-dimensional hydrodynamics with free surface: new constants of motion

Published online by Cambridge University Press:  12 July 2019

A. I. Dyachenko
Affiliation:
Landau Institute for Theoretical Physics, Chernogolovka, 142432, RussiaCenter for Advanced Studies, Skoltech, Moscow, 143026, Russia
S. A. Dyachenko
Affiliation:
Department of Mathematics, University of Illinois at Urbana-Champaign, Urbana, IL 61801, USADepartment of Applied Mathematics, University of Washington, Seattle, WA 98195, USA
P. M. Lushnikov*
Affiliation:
Landau Institute for Theoretical Physics, Chernogolovka, 142432, RussiaDepartment of Mathematics and Statistics, University of New Mexico, Albuquerque, NM 87131, USA
V. E. Zakharov
Affiliation:
Landau Institute for Theoretical Physics, Chernogolovka, 142432, RussiaCenter for Advanced Studies, Skoltech, Moscow, 143026, RussiaDepartment of Mathematics, University of Arizona, Tucson, AZ 85721, USA
*
†Email address for correspondence: plushnik@math.unm.edu

Abstract

We address the problem of the potential motion of an ideal incompressible fluid with a free surface and infinite depth in a two-dimensional geometry. We admit the presence of gravity forces and surface tension. A time-dependent conformal mapping $z(w,t)$ of the lower complex half-plane of the variable $w$ into the area filled with fluid is performed with the real line of $w$ mapped into the free fluid’s surface. We study the dynamics of singularities of both $z(w,t)$ and the complex fluid potential $\unicode[STIX]{x1D6F1}(w,t)$ in the upper complex half-plane of $w$. We show the existence of solutions with an arbitrary finite number $N$ of complex poles in $z_{w}(w,t)$ and $\unicode[STIX]{x1D6F1}_{w}(w,t)$ which are the derivatives of $z(w,t)$ and $\unicode[STIX]{x1D6F1}(w,t)$ over $w$. We stress that these solutions are not purely rational because they generally have branch points at other positions of the upper complex half-plane. The orders of poles can be arbitrary for zero surface tension while all orders are even for non-zero surface tension. We find that the residues of $z_{w}(w,t)$ at these $N$ points are new, previously unknown, constants of motion, see also Zakharov & Dyachenko (2012, authors’ unpublished observations, arXiv:1206.2046) for the preliminary results. All these constants of motion commute with each other in the sense of the underlying Hamiltonian dynamics. In the absence of both gravity and surface tension, the residues of $\unicode[STIX]{x1D6F1}_{w}(w,t)$ are also the constants of motion while non-zero gravity $g$ ensures a trivial linear dependence of these residues on time. A Laurent series expansion of both $z_{w}(w,t)$ and $\unicode[STIX]{x1D6F1}_{w}(w,t)$ at each poles position reveals the existence of additional integrals of motion for poles of the second order. If all poles are simple then the number of independent real integrals of motion is $4N$ for zero gravity and $4N-1$ for non-zero gravity. For the second-order poles we found $6N$ motion integrals for zero gravity and $6N-1$ for non-zero gravity. We suggest that the existence of these non-trivial constants of motion provides an argument in support of the conjecture of complete integrability of free surface hydrodynamics in deep water. Analytical results are solidly supported by high precision numerics.

Information

Type
JFM Papers
Copyright
© 2019 Cambridge University Press 
Figure 0

Figure 1.Shaded area represents the domain occupied by fluid in the physical plane $z=x+\text{i}y$ (a) and the same domain in $w=u+\text{i}v$ plane (b). Thick solid lines correspond to the fluid’s free surface.

Figure 1

Figure 2.Simulations with the initial conditions (9.1), (9.4) and $g=\unicode[STIX]{x1D6FC}=0$. (a) Profiles of free surface at different times. (b) Complex singularities of $z_{u}$ recovered by the AGH algorithm at small times including the initial time $t=0$. Two persistent poles recovered by the AGH algorithm are shown by thick dots of different style moving near the imaginary axis. It is seen that these two poles, originating from the initial conditions (their initial positions are exactly at the imaginary axis according to equation (9.4)), only slightly move away from the initial positions at these early times. Two initial zeros of $z_{u}$ located at $w=w_{\pm }$ according to equation (9.5) turn into two short branch cuts at arbitrarily short times. Each branch cut connects two branch points. These branch cuts are revealed in the AGH algorithm by a dense set of poles located near $w=w_{\pm }$ with the number of these poles growing with time. (c) The schematic zoom into a small area around $w=w_{-}$ (in (b) that area is shown by the rectangular frame around the left branch cut) to display the extension of branch cut with time. The small filled square shows the point $w=w_{-}$. The length of each branch cut grows approximately linearly with time. (d) The same as in (b) but at larger times when the length of the branch cuts reaches ${\sim}1$. Poles approximating branch cuts are connected by solid lines.

Figure 2

Figure 3.(a) The residues of $z_{u}$ at $w=a_{1}(t)$ and $w=a_{2}(t)$ as functions of $t$ compared with equation (4.12). (b) The residues of $\unicode[STIX]{x1D6F1}_{u}$ at $w=a_{1}(t)$ and $w=a_{2}(t)$ compared with equation (4.13). (c) Trajectories of $w=a_{1}(t)$ and $w=a_{2}(t)$ in the $w$ plane compared with the result of the integration of the analytical expression (4.5). (d) Dependence of real and imaginary parts of $a_{1}$ and $a_{2}$ on $t$ for the same data as in (b). (a–d) Show the same simulation as in figure 2 (with $g=0$). (e,f) Show the same type of plots as (a,b) except a non-zero gravity $g=0.04$ is added to the simulation with all other parameters the same as in the simulations of figure 2.

Figure 3

Figure 4.Simulations with the initial conditions (9.1), (9.6) and $\unicode[STIX]{x1D6FC}=0.$ (a,b) Profiles of free surface at different times for $g=0$ and $g=0.005$, respectively. (c) Positions of two persistent poles (originate at $w=a_{1}(0)$ and $w=a_{2}(0)$, shown by small open circles, triangles and rhombi) and branch cuts (thick dots and triangles connected by solid lines) are shown at different $t$ for simulation with $g=0$. These poles and branch cuts determine the mushroom type shape of (a). There are other branch cuts well above (not shown) which determine only the background of the free surface height outside of the mushroom. (d) Vertical positions for both poles (solid and dashed lines) for $g=0$ and $g=0.005$ versus $t$ in log scale. The exponential dependence $\propto \text{e}^{-\unicode[STIX]{x1D6FD}t}$, $\unicode[STIX]{x1D6FD}\simeq 0.578329$ is also shown for comparison. (e) The residues of $z_{u}$ at $w=a_{1}(t)$ and $w=a_{2}(t)$ extracted from the simulations are constant in time both for $g=0$ and $g=0.005$ in agreement with equation (4.12). (f) The residues of $\unicode[STIX]{x1D6F1}_{u}$ at $w=a_{1}(t)$ and $w=a_{2}(t)$ are either constant or a linear function of $t$ depending on $g$ and are visually indistinguishable from equation (4.13).

Figure 4

Figure 5.Simulations of the initial conditions (9.1), (9.7), $g=\unicode[STIX]{x1D6FC}=0$ and either (9.8) (a,c,e) or (9.9) (b,d,f). (a,b) The shape of the surface. Dotted line in (a) shows a fit of the overturning portion of the wave to the square root dependence $z=q\,(w-w_{c})^{1/2}+z_{0}$, where fitting parameters are $z_{0}=0.0923+0.0961\,\text{i}$ and $q=0.595329+4.48567\,\text{i}$ while $w_{c}=-0.02348+3.2923\times 10^{-6}\,\text{i}$ is recovered from the AGH algorithm as the position of the lowest end of the branch cut. (c,d) The motion of the poles (small open circles and triangles) and branch cuts (filled circles and triangles connected by solid lines) in the $w$ plane. The small filled squares show the point $w=w_{\pm }$ from equation (9.3). (e,f) Residues of $z_{u}$ extracted from simulations are constant in time in agreement with equation (4.12). A similar statement is true for the residues of $\unicode[STIX]{x1D6F1}_{u}$ in accordance with equation (4.13) (not shown).

Figure 5

Figure 6.(a) Free surface profiles resulting from simulations for the cases (A), (B), (C) and (D) of equation (9.16) at $t=0.25$ compared with the initial profile at $t=0.$ (b) $|V|^{2}$ at the free surface for the same cases.

Figure 6

Figure 7.Data extracted from simulations for the cases (A) (a,c,e) and (B) (b,d,f) of equation (9.16). (a,b) The dependence of $\text{Im}(a)$ on $t$ in equation (6.11) compared with the result of the integration of the analytical expression (6.5) ($a$ is purely imaginary in these cases). For each moment of time the location of $w=a=\text{i}\,\text{Im}(a)$ was found as the solution of $R(w)=0$ by Newton’s method. (c,d) The dependence of $R_{2}$ on $t$ in equation (6.11) compared with the result of the integration of the analytical expression (6.8). $R_{2}$ is purely real in these cases. In (a,b) and (c,d) $U_{0}(t)$ and $U_{1}(t)$ were obtained from the AGH algorithm similar to § 9.1. (e,f) Motion of the pole (small open circle and triangles) and branch cuts (filled triangles connected by solid lines) in the $w$ plane for $z(w,t)$. The small filled squares show the points $w=w_{\pm }$ from equation (9.15).

Figure 7

Figure 8.Similar results to figures 7(a,b) and 7(c,d) but for the cases (C) (a,c) and (D) (b,d) of equation (9.16).