Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T16:15:11.972Z Has data issue: false hasContentIssue false

Damping of solitons by coastal vegetation

Published online by Cambridge University Press:  10 January 2025

Michele Mossa*
Affiliation:
DICATECh, Polytechnic University of Bari, Via E. Orabona 4, 70125 Bari, ItalyCoNISMa, Piazzale Flaminio 9, 00196 Rome, Italy
Diana De Padova
Affiliation:
DICATECh, Polytechnic University of Bari, Via E. Orabona 4, 70125 Bari, ItalyCoNISMa, Piazzale Flaminio 9, 00196 Rome, Italy
Miguel Onorato
Affiliation:
Dipartimento di Fisica and INFN, Università di Torino, Via P. Giuria 1, 10125 Torino, Italy
*
†Email address for correspondence: michele.mossa@poliba.it

Abstract

Mangroves are a natural defence of the coastal strip against extreme waves. Furthermore, innovative techniques of naturally based coast defence are used increasingly, according to the canons of eco-hydraulics. Therefore, it is important to correctly evaluate the transmission of waves through cylinder arrays. In the present paper, the attenuation of solitary waves propagating through an array of rigid emergent and submerged cylindrical stems on a horizontal bottom is investigated theoretically, numerically and experimentally. The results of the theoretical model are compared with the numerical simulations obtained with the smoothed particle hydrodynamics meshless Lagrangian numerical code and with experimental laboratory data. In the latter case, solitary waves were tested on a background current, in order to reproduce more realistic sea conditions, since the absence of circulation currents is very rare in the sea. The comparison confirmed the validity of the theoretical model, allowing its use for the purposes indicated above. Furthermore, the present study allowed for an evaluation of the bulk drag coefficient of the rigid stem arrays used, as a function of their density, the stem diameter, and their submergence ratio.

Information

Type
JFM Papers
Copyright
© The Author(s), 2025. Published by Cambridge University Press
Figure 0

Figure 1.Example of interactions of waves and obstacles: (a) coastal vegetation; (b) Indian Ocean tsunami with coastal vegetation; (c) poles of a mussel farm; (d) typical so-called briccole of Venice.

Figure 1

Figure 2.Functions $M$ and $N$ in solitary wave theory, after Munk (1949).

Figure 2

Figure 3.Definition of key geometric parameters for an array of cylinders of uniform diameter.

Figure 3

Figure 4.Theoretical wave heights of solitary waves propagating on a horizontal bottom with emerged obstacles and obstacles with a submerged ratio equal to 50 %. Here, $ad$ means array density.

Figure 4

Figure 5.Front view of the computational wave tank: geometrical set-up and initial conditions.

Figure 5

Table 1.Values of some parameters of the numerical tests of solitary waves.

Figure 6

Figure 6.Effect of particle resolution on the numerical simulation (test A3): computed and analytical free surface elevation measured at a distance $x=2.5h$; ‘$\eta$’ is the free surface elevation of a solitary wave.

Figure 7

Figure 7.Comparison of the numerical and theoretical velocity profiles beneath the crest of a solitary wave (test A1 with $H/Dx=100$).

Figure 8

Figure 8.Vorticity (in $\textrm {s}^{-1}$) on a horizontal plane at distance 0.35 m from the channel bottom: (a) test A1, (b) test B1, (c) test C1.

Figure 9

Figure 9.Comparison between theoretical and numerical wave heights of solitary waves of tests of group A: (a) test A0, (b) test A1, (c) test A2, (d) test A3.

Figure 10

Figure 10.Comparison between theoretical and numerical wave heights of solitary waves of tests of group B: (a) test B0, (b) test B1, (c) test B2, (d) test B3.

Figure 11

Figure 11.Comparison between theoretical and numerical wave heights of solitary waves of tests of group C: (a) test C0, (b) test C1, (c) test C2, (d) test C3.

Figure 12

Figure 12.Experimental set-up at the Polytechnic University of Bari, where UPs are the ultrasonic probes.

Figure 13

Figure 13.Some photos of the complex experimental apparatus: (a) a view of the flume; (b) the electro-valve.

Figure 14

Figure 14.Obstacle patterns for the three tested configurations.

Figure 15

Figure 15.Side view of the stem array.

Figure 16

Table 2.Values of some parameters of the experimental runs of solitary waves.

Figure 17

Figure 16.Comparison between theoretical and experimental solitary wave heights: (a) test Exp1, (b) test Exp2, (c) test Exp3.

Figure 18

Figure 17.Diagram of the experimental values of the bulk drag coefficient $C_D$ with the fitting line and the variability range of the experimental data from the literature (Nepf 1999).

Figure 19

Figure 18.Relationship between $KC_{r_v}$ and the $C_D$ data of three vegetation models of Wang et al. (2022), with their theoretical curve, their proposal of a 95 % prediction band, and the data of the present study.