Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T09:10:35.376Z Has data issue: false hasContentIssue false

Slab avalanche release viewed as interface fracture in a random medium

Published online by Cambridge University Press:  14 September 2017

Michael Zaiser*
Affiliation:
Centre for Materials Science and Engineering, The University of Edinburgh, Sanderson Building, The King’s Buildings, Edinburgh EH9 3JL, Scotland E-mail: M.Zaiser@ed.ac.uk
Rights & Permissions [Opens in a new window]

Abstract

A theoretical model is formulated to investigate the influence of random variations in strength of the weak layer on slab avalanche release. An equation for slab stability is derived which accounts for stress redistribution between strong and weak regions. The model is first used to re-derive results on shear fractures (shear bands) in a homogeneous slab. It is then applied to the case of a slab with randomly varying peak strength of the weak layer. It is demonstrated that such variation may have a dramatic knock-down effect on the failure strength of a slope. The nature of the critical flaw is studied and precursors to failure are investigated.

Information

Type
Research Article
Copyright
Copyright © The Author(s) [year] 2004
Figure 0

Fig. 1.Snowpack geometry considered in the model.

Figure 1

Fig. 2.Shear strength vs displacement across weak layer, and “equal-area” condition fulfilled by a shear band (schematically).

Figure 2

Table 1.Typical values and ranges of the physical parameters entering the model

Figure 3

Fig. 3.Dependence of slope failure stress on the average peak strength and peak-strength variation of the weak layer. Square data points: critical stresses for average peak strength 〈TM〉 = 5 and different values of the peak-strength variation σM/〈TM〉. Insert: dependence of failure stress on peak strength for two different values of the relative peak-strength variation. Each data point represents an average over an ensemble of 100 systems; the error bars represent the variance of the respective failure stress distributions.

Figure 4

Fig. 4.Data points: two-point correlation function C(X) = 〈D(X′)D(X + X′)〉 of the damage pattern (average over final configurations of 1000 simulations); full line: power-law decay C(X) / X -0:46. Insert: distribution of damage at failure for one system.

Figure 5

Fig. 5.Average slope susceptibility (mean displacement increment per unit stress increment, average over 104 simulations) as a function of distance from critical stress. Insert: displacement increments in a single simulation with step size ΔT =0.02.