Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T11:43:21.606Z Has data issue: false hasContentIssue false

Elastohydrodynamics of a pre-stretched finite elastic sheet lubricated by a thin viscous film with application to microfluidic soft actuators

Published online by Cambridge University Press:  14 January 2019

Evgeniy Boyko
Affiliation:
Faculty of Mechanical Engineering, Technion – Israel Institute of Technology, Haifa 3200003, Israel
Ran Eshel
Affiliation:
Faculty of Mechanical Engineering, Technion – Israel Institute of Technology, Haifa 3200003, Israel
Khaled Gommed
Affiliation:
Faculty of Mechanical Engineering, Technion – Israel Institute of Technology, Haifa 3200003, Israel
Amir D. Gat*
Affiliation:
Faculty of Mechanical Engineering, Technion – Israel Institute of Technology, Haifa 3200003, Israel
Moran Bercovici*
Affiliation:
Faculty of Mechanical Engineering, Technion – Israel Institute of Technology, Haifa 3200003, IsraelDepartment of Mechanical Engineering, The University of Texas at Austin, Austin, Texas, TX 78712, USA
*
†Email addresses for correspondence: amirgat@technion.ac.il, mberco@technion.ac.il
†Email addresses for correspondence: amirgat@technion.ac.il, mberco@technion.ac.il

Abstract

The interaction of a thin viscous film with an elastic sheet results in coupling of pressure and deformation, which can be utilized as an actuation mechanism for surface deformations in a wide range of applications, including microfluidics, optics and soft robotics. Implementation of such configurations inherently takes place over finite domains and often requires some pre-stretching of the sheet. Under the assumptions of strong pre-stretching and small deformations of the lubricated elastic sheet, we use the linearized Reynolds and Föppl–von Kármán equations to derive closed-form analytical solutions describing the deformation in a finite domain due to external forces, accounting for both bending and tension effects. We provide a closed-form solution for the case of a square-shaped actuation region and present the effect of pre-stretching on the dynamics of the deformation. We further present the dependence of the deformation magnitude and time scale on the spatial wavenumber, as well as the transition between stretching- and bending-dominant regimes. We also demonstrate the effect of spatial discretization of the forcing (representing practical actuation elements) on the achievable resolution of the deformation. Extending the problem to an axisymmetric domain, we investigate the effects arising from nonlinearity of the Reynolds and Föppl–von Kármán equations and present the deformation behaviour as it becomes comparable to the initial film thickness and dependent on the induced tension. These results set the theoretical foundation for implementation of microfluidic soft actuators based on elastohydrodynanmics.

Information

Type
JFM Papers
Copyright
© 2019 Cambridge University Press 
Figure 0

Figure 1.(a) Illustration and (b) image of an experimental set-up for deformation of an elastic sheet, actuated by non-uniform electro-osmotic flow. The configuration consists of a $12~\unicode[STIX]{x03BC}\text{m}$ thick low-density polyethylene sheet stretched over a rigid frame that is supported by $100~\unicode[STIX]{x03BC}\text{m}$ tall pillars from a rigid glass substrate, forming a Hele-Shaw chamber. The glass surface is patterned with three parallel electrodes and coated with an insulating oxide layer, excluding a rectangular actuation region at the centre. The chamber is filled with an aqueous solution, and the voltage is set to drive electro-osmotic flow from the outer electrodes to the inner ones, resulting in internal pressure gradients. (c) Experimental results showing the growth and decay of deformation at the centre of the elastic membrane, in response to sudden actuation and cessation of the electric field. Error bars indicate a $95\,\%$ confidence on the mean based on six repeats, and the red curve represents the corresponding applied voltage as a function of time.

Figure 1

Figure 2.Schematic illustration showing the centreline cross-section of the examined configuration. A thin viscous fluid layer of initial thickness $\tilde{h}_{0}$ is confined between a rigid surface and a pre-stretched elastic sheet supported at its boundaries. Non-uniform and time-varying slip velocity $\tilde{\boldsymbol{u}}_{slip}(\tilde{x},{\tilde{y}},\tilde{t})$ and external pressure $\tilde{p}_{e}(\tilde{x},{\tilde{y}},\tilde{t})$ drive the viscous–elastic interaction and create the deformation field $\tilde{d}(\tilde{x},{\tilde{y}},\tilde{t})$.

Figure 2

Figure 3.Investigation of the deformation field resulting from two square-shaped regions with opposite signs of zeta potential subjected to a constant electric field suddenly applied at $t=0$. (a) The deformation field (colour map) at $t=0.1$, superposed on a schematic illustration of the two oppositely directed electro-osmotic actuation regions. (b) The scaled steady-state deformation $d/d_{max}$ along the $\hat{\boldsymbol{x}}$ axis, showing the evolution of the deformation for $\unicode[STIX]{x1D706}=10^{-3}$, and a comparison between the steady-state deformation at $\unicode[STIX]{x1D706}=10^{-3}$ (tension dominant, with $d_{max}=3.7\times 10^{-2}$) and $\unicode[STIX]{x1D706}=10$ (bending dominant, with $d_{max}=1.2\times 10^{-3}$). (c,d) The evolution of the maximum deformation and pressure as a function of time. (e) The maximum deformation $\tilde{d}_{max}$ at steady state, scaled by $\tilde{h}_{0}$, as a function of $\unicode[STIX]{x1D706}$, for $\tilde{E}_{Y}=1~\text{MPa}$ and $\tilde{E}_{Y}=1~\text{GPa}$. The dashed and solid grey lines indicate the validity boundaries $\tilde{d}_{max}/\tilde{h}_{0}=0.1$ and $\unicode[STIX]{x1D6FC}=0.1$, respectively, where the greyed-out region is beyond the validity of the model. All calculations were performed using $\tilde{l}^{\ast }=5~\text{mm}$, $\tilde{h}_{0}=100~\unicode[STIX]{x03BC}\text{m}$, $\tilde{p}^{\ast }\approx 1~\text{Pa}$, $\tilde{h}_{m}=10~\unicode[STIX]{x03BC}\text{m}$, $\unicode[STIX]{x1D708}=0.5$, $c_{x,1}=2\unicode[STIX]{x03C0}/5$, $c_{x,2}=3\unicode[STIX]{x03C0}/5$, $c_{y,1}=c_{y,2}=\unicode[STIX]{x03C0}/2$ and $L=\unicode[STIX]{x03C0}/10$.

Figure 3

Figure 4.The effect of wavenumber on the magnitude of the deformation and the time scale of viscous–elastic interaction. (a) Deformation in dimensional form along the $\hat{\boldsymbol{x}}$ axis for various values of $k_{x}$, with $k_{y}=1$ and $\tilde{h}_{m}=10~\unicode[STIX]{x03BC}\text{m}$. (b,c) The maximum (dimensional) deformation $\tilde{d}_{0}$ and time scale $\tilde{\unicode[STIX]{x1D70F}}_{0}$, respectively, as a function of wavenumber $k_{x}$, for $k_{y}=1$ and different values of the elastic sheet thickness, $\tilde{h}_{m}$. All calculations were performed using non-uniform electro-osmotic actuation as the driving mechanism, with $\tilde{h}_{0}=100~\unicode[STIX]{x03BC}\text{m}$, $\tilde{l}_{m}=\tilde{w}_{m}=4~\text{cm}$, $\tilde{E}_{Y}=0.3~\text{GPa}$, $\unicode[STIX]{x1D708}=0.5$, $\tilde{T}=15~\text{Pa}~\text{m}$, $\tilde{\unicode[STIX]{x1D701}}_{0}=-70~\text{mV}$, $\tilde{E}=100~\text{V}~\text{cm}^{-1}$ and $\tilde{\unicode[STIX]{x1D700}}=7.08\times 10^{-10}~\text{F}~\text{m}^{-1}$.

Figure 4

Figure 5.The effect of actuation discretization on the shape and the magnitude of the deformation. (a) Deformation formed by the continuous driving force $f_{F_{x}}$ shown in (c), acting in the $\hat{\boldsymbol{x}}$ direction. (b) Deformation obtained from $4\times 4$ square-shaped actuation regions, each having a uniform value which is found by solving the least-squares problem (5.3) and shown in (d). (e,f) Deformation along the $\hat{\boldsymbol{x}}$ and $\hat{\boldsymbol{y}}$ axes, respectively, for different levels of discretization.

Figure 5

Figure 6.Demonstration of the use of a least-squares discretization method for creation of a complex deformation. (a) Top view of a microfluidic configuration, in which black lines represent the confining walls, characterized by step-like behaviour. (b) The deformation field (colour map) obtained from $28\times 28$ square-shaped actuation regions, each having a uniform value found by solving the least-squares problem (5.3). (c) Deformation along the two cross-sections, depicted in (a) and (b), showing that discretization results in undesired oscillations of the deformation field. Dashed and solid lines correspond to the chosen and obtained deformation, respectively.

Figure 6

Figure 7.The effect of weak nonlinearity due to induced tension. (a,b) Comparison between asymptotic and numerical results for the maximum deformation and tension at steady state as a function of $\unicode[STIX]{x1D6FC}$. Dashed black and grey lines correspond to the leading- and first-order asymptotic solutions, respectively, while black dots correspond to the numerical solution. (c,d) Comparison between asymptotic (dashed lines) and numerical (solid lines) solutions for the steady-state deformation and tension, respectively, for $\unicode[STIX]{x1D6FC}=0,0.5$ and 1. All calculations were performed using $\unicode[STIX]{x1D6FD}=0$, $V_{r}=-2$, $\unicode[STIX]{x1D708}=0.5$ and $R_{m}=2$.

Figure 7

Figure 8.Investigation of nonlinear effects on the transient behaviour and the magnitude of deformation. (a,b) The time evolution of the deformation field for $\unicode[STIX]{x1D6FD}=0$ (a) and $\unicode[STIX]{x1D6FD}=0.1$ (b), in the case of a strongly pre-stretched elastic membrane, $\unicode[STIX]{x1D6FC}=0$. Grey solid lines represent the numerical results and black dashed lines represent the leading-order asymptotic solution (6.12). (c) The maximum deformation, obtained at the centre of the membrane, as a function of time for various values of $\unicode[STIX]{x1D6FD}$, with $\unicode[STIX]{x1D6FC}=0$. (d) The maximum deformation, in dimensional form, scaled by the initial fluid thickness, $\tilde{d}_{max}/\tilde{h}_{0}=\unicode[STIX]{x1D6FD}d_{max}$ as a function of the parameter $\unicode[STIX]{x1D6FD}$, for various values of $\unicode[STIX]{x1D6FC}$. In (c,d) solid lines and dots represent the numerical results, respectively, and the dashed black curve represents the asymptotic solution (6.12). All calculations were performed using $V_{r}=-2$, $\unicode[STIX]{x1D708}=0.5$ and $R_{m}=2$.

Figure 8

Figure 9.Investigation of nonlinear effect of the induced tension on the maximum displacement and tension. (a,b) Maximum displacement, $\unicode[STIX]{x1D6FD}d_{max}=h_{max}-1=\tilde{d}_{max}/\tilde{h}_{0}$ and tension, $T_{r,max}$, as a function of $\unicode[STIX]{x1D6FC}$, for $\unicode[STIX]{x1D6FD}=0.1,0.5$ and 1, obtained from numerical solution of (6.4)–(6.5). For $\unicode[STIX]{x1D6FC}\ll 1$, both deformation and tension are independent of $\unicode[STIX]{x1D6FC}$, while for $\unicode[STIX]{x1D6FC}\gg 1$ the deformation decreases as $\unicode[STIX]{x1D6FC}^{-1/3}$ and the tension increases as $\unicode[STIX]{x1D6FC}^{1/3}$. All calculations were performed using $V_{r}=-2$, $\unicode[STIX]{x1D708}=0.5$ and $R_{m}=2$.

Boyko et al. supplementary movie 1

The evolution of pressure and deformation fields, resulting from two square-shaped regions with opposite signs of zeta potential, subjected to an electric field suddenly applied at t=0.

Download Boyko et al. supplementary movie 1(Video)
Video 9.4 MB

Boyko et al. supplementary movie 2

The steady-state oscillations of pressure and deformation fields, resulting from a single square region with a fixed zeta potential, subjected to an oscillating electric field.

Download Boyko et al. supplementary movie 2(Video)
Video 9.3 MB
Supplementary material: PDF

Boyko et al. supplementary material

Supplementary material

Download Boyko et al. supplementary material(PDF)
PDF 1.7 MB