Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-17T22:49:16.367Z Has data issue: false hasContentIssue false

Thermal expansion of GaN at low temperatures - a comparison of bulk and homo- and heteroepitaxial layers

Published online by Cambridge University Press:  13 June 2014

Verena Kirchner
Affiliation:
University of Bremen, Institute of Solid State Physics, Bremen, Germany
Heidrun Heinke
Affiliation:
University of Bremen, Institute of Solid State Physics, Bremen, Germany
Sven Einfeldt
Affiliation:
University of Bremen, Institute of Solid State Physics, Bremen, Germany
Detlef Hommel
Affiliation:
University of Bremen, Institute of Solid State Physics, Bremen, Germany
Jaroslaw Z. Domagala
Affiliation:
Polish Academy of Science, Institute of Physics, Dept. of X-ray Studies and Electron Microscopy, Warsaw, Poland
Michal Leszczynski
Affiliation:
High Pressure Research Center, Unipress, Warsaw, Poland

Abstract

The thermal expansion of different GaN samples is studied by high-resolution X-ray diffraction within the temperature range of 10 to 600 K. GaN bulk crystals, a homoepitaxial layer and different heteroepitaxial layers grown by metalorganic chemical vapor deposition (MOCVD) and molecular beam epitaxy (MBE) were investigated. Below 100 K the thermal expansion coefficients (TEC) were found to be nearly zero which has to be taken into account when estimating the thermal strain of GaN layers in optical experiments commonly performed at low temperatures. The homoepitaxial layer and the underlying GaN substrate with a lattice mismatch of −6·10−4 showed identical thermal expansion. The comparison between the temperature behavior of lattice parameters of heteroepitaxial layers and bulk GaN points to a superposition of thermally induced biaxial strain and compressive hydrostatic strain.

Information

Type
Research Article
Copyright
Copyright © 1996 Materials Research Society
Figure 0

Figure 1.Triple axis 2θ/ω scan for the (006) reflection (a) and the corresponding RSM (b). The intensity maximums A and B are assigned to two grains of the substrate with different lattice parameter c.

Figure 1

Figure 2.Lattice parameters c in dependence on the temperature for an undoped bulk crystal (substrate) overgrown with a 3 µm thick MOCVD layer and a Mg-doped GaN bulk crystal. The error bars are representative for all lattice parameters given. The lattice parameters a are shown in the inset.

Figure 2

Figure 3.Comparison of the lattice parameters c in dependence on the temperature for bulk GaN, homoepitaxial and different heteroepitaxial GaN layers.