Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T09:50:42.127Z Has data issue: false hasContentIssue false

Formation regimes of vortex rings in thermals

Published online by Cambridge University Press:  07 January 2020

Xinping Zhou*
Affiliation:
School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan430074, PR ChinaDepartment of Mechanics, Huazhong University of Science and Technology, Wuhan430074, PR China
Yangyang Xu*
Affiliation:
Department of Mechanics, Huazhong University of Science and Technology, Wuhan430074, PR China
Wanqiu Zhang
Affiliation:
School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan430074, PR ChinaDepartment of Mechanics, Huazhong University of Science and Technology, Wuhan430074, PR China
*
†Email addresses for correspondence: xpzhou08@hust.edu.cn, yangyangxu91@hust.edu.cn
†Email addresses for correspondence: xpzhou08@hust.edu.cn, yangyangxu91@hust.edu.cn

Abstract

The development of laminar thermals and the formation of buoyant vortex rings in thermals are studied by performing direct numerical simulations. The formation number of buoyant vortex rings in thermals is also analysed. We find that the development of thermals can be classified into three modes: the starting vortex ring dominated mode; the mode with the occurrence of a secondary vortex ring with breakup; and the mode with the occurrence of a secondary vortex ring without breakup. For the latter two modes, owing to the stretching of the thermal cap, the fluid at the leading edge rolls up, and a secondary vortex ring occurs, grows and replaces the starting vortex ring. The boundary of non-occurrence and occurrence of the secondary vortex ring is determined in a space of Richardson number (Ri) and injection duration ($t_{i}$). The final mode occurs only in a small region. For $Ri<0.6$, the secondary vortex ring does not occur even for very long injection duration. The effective Rayleigh number ($Ra_{m}$) is proposed to accommodate the cases $Ri>0.7$ and $t_{i}<5$, with $Ra_{m}$ larger than the critical value (approximates to 1. 95 × 105) for the occurrence of the secondary vortex ring. The formation number of buoyant vortex rings in thermals is beyond the universal formation number of 4 for non-buoyant vortex rings, and increases with the increase of the Richardson number and the injection duration. The switching between the thermal modes by changing the Richardson number and the injection duration has no significant effect on the value of the formation number.

Information

Type
JFM Papers
Copyright
© 2020 Cambridge University Press
Figure 0

Figure 1.Sketch of the computational domain of a thermal flow and the boundary conditions.

Figure 1

Figure 2.An exploded view of the temperature front of $\unicode[STIX]{x1D703}=0.05$ at $t=4$ for $Ri=2$ and $t_{i}=2$.

Figure 2

Table 1.Richardson numbers and fluid injection durations for the computational cases.

Figure 3

Figure 3.Shape evolution of the thermal caps represented by the temperature contour plots in the longitudinal section of $z=0$ for $t\leqslant 6$ for two typical cases: (a) $Ri=1.5$, $t_{i}=2$; (b) $Ri=1.5$, $t_{i}=3$.

Figure 4

Figure 4.Shape evolution of the thermal caps represented by the temperature contour plots for $t\geqslant 7$ for two typical cases: (a) $Ri=1.5$, $t_{i}=3$; (b) $Ri=2$, $t_{i}=2$. The temperature contour plots in the longitudinal section of $z=0$ are at $t=7$, 7.5, 8, 8.5, 9 and 15 in sequence.

Figure 5

Figure 5.Vorticity isolines in the longitudinal section of $z=0$ at $t=6$, 8, 12, 18 and 24 for the three typical thermal cap modes. (a) $Ri=1.5$, $t_{i}=2$; (b) $Ri=2$, $t_{i}=2$; (c) $Ri=1.5$, $t_{i}=3$. The vorticities of the isolines are respectively equal to $\pm 80\,\%$, $\pm 60\,\%$, $\pm 40\,\%$, $\pm 20\,\%$ and $\pm 4\,\%$ of the maximum vorticity in the flow field.

Figure 6

Figure 6.Boundary between non-occurrence and occurrence of the secondary vortex ring in a (Ri, $t_{i}$) space for $Re=100$ and $Pr=7$. Red squares represent the non-occurrence of the secondary vortex ring (NSVR), and the blue line white triangles represent the occurrence of the secondary vortex ring (OSVR) without breakup and green triangles represent the OSVR with breakup. Black solid line is the boundary line of NSVR and OSVR. The other seven computational cases in table 1 used in figure 8 are a little far from the boundary and therefore are not included here.

Figure 7

Figure 7.(a) Evolution of the total circulation and the vortex circulation and (b) the circulation of the pinched off vortex ring and the formation number (F) for different cutoff percentages ($Ri=2$, $t_{i}=2$). In (a), the formation time for pinch-off is $\unicode[STIX]{x1D70F}=33.5$.

Figure 8

Figure 8.Effects of (a) the injection duration and (b) the Richardson number on the pinched off vortex ring circulation and the formation number. In (a), the Richardson number is kept constant: $Ri=1$, the injection duration varies from 2 to 6 at an interval of 0.5 and the formation number increases from 5.4 to 7.8. In (b), the injection duration is kept constant: $t_{i}=2$, the Richardson number varies from 1 to 4 at an interval of 0.5 and the formation number increases from 5.4 to 6.4.