Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T21:27:42.749Z Has data issue: false hasContentIssue false

Improved Low Resistance Contacts of Ni/Au and Pd/Au to p-Type GaN Using a Cryogenic Treatment

Published online by Cambridge University Press:  13 June 2014

Mi-Ran Park
Affiliation:
State University of New York at Buffalo, Department of Electrical Engineering, Amherst, NY, U.S.A.
Wayne A. Anderson
Affiliation:
State University of New York at Buffalo, Department of Electrical Engineering, Amherst, NY, U.S.A.
Seong-Ju Park
Affiliation:
Kwangju Institute of Science and Technology, Department of Materials Science and Engineering, Kwangju, Korea

Abstract

A low resistance Ohmic contact to p-type GaN is essential for reliable operation of electronic and optoelectronic devices. Such contacts have been made using Ni/Au and Pd / Au contacts to p-type Mg-doped GaN (1.41×1017 cm−3) grown by metalorganic chemical vapor deposition ( MOCVD ) on ( 0001 ) sapphire substrates. Thermal evaporation was used for the deposition of those metals followed by annealing at temperatures of 400 ∼ 700 °C in an oxygen and nitrogen mixed gas ambient, then subsequently cooled in liquid nitrogen which reduced the specific contact resistance from the range of 9.46∼2.80×10−2 Ωcm2 to 9.84∼2.65×10−4 Ωcm2 for Ni/Au and from the range of 8.35∼5.01×10−4 Ωcm2 to 3.34∼1.80×10−4 Ωcm2 for Pd/Au. The electrical characteristics for the contacts were examined by the current versus voltage curves and the specific contact resistance was determined by use of the circular transmission line method (c-TLM). The effects of the cryogenic process on improving Ohmic behavior (I-V linearity) and reducing the specific contact resistance will be discussed from a microstructural analysis which reveals the metallurgy of Ohmic contact formation.

Information

Type
Research Article
Copyright
Copyright © 1996 Materials Research Society
Figure 0

Figure 1.Current versus voltage curves for the Ni/Au and the Pd/Au contacts to p-GaN as deposited and annealed with and without cryogenic treatment in liquid nitrogen.

Figure 1

Figure 2.ESCA depth profiles for the Au/Ni/p-GaN: (a) annealed at 600 °C 10 min. in O2/N2 and (b) annealed and cryogenically treated.

Figure 2

Figure 3.ESCA depth profiles for the Au/Pd/p-GaN: (a) annealed at 700 °C 10 min. in O2/N2 and (b) annealed and cryogenically treated.

Figure 3

Figure 4.SEM images for the Ni/Au contacts to p-GaN: (a) annealed at 600 °C for 10 min. in an O2/N2 and (b) annealed and cryogenically treated.

Figure 4

Figure 5.SEM images for the Pd/Au contacts to p-GaN: (a) annealed at 700 °C for 10 min. in an O2/N2 and (b) annealed and cryogenically treated.