Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T20:17:18.371Z Has data issue: false hasContentIssue false

A body in nonlinear near-wall shear flow: numerical results for a flat plate

Published online by Cambridge University Press:  11 March 2021

Ryan A. Palmer*
Affiliation:
Department of Mathematics, University College London, London WC1H 0AY, UKRecently changed institution: School of Mathematics, Fry Building, Woodland Road, Bristol BS8 1UG, UK
Frank T. Smith
Affiliation:
Department of Mathematics, University College London, London WC1H 0AY, UK
*
†Email address for correspondence: ryan.palmer@bristol.ac.uk

Abstract

Direct numerical solutions are described for flow past a body placed in an otherwise uniform shear layer adjoining a wall. The study is associated with potential impact of the body onto the wall. Steady two-dimensional flow solutions are calculated for an inclined flat plate in particular, covering cases of zero wall velocity, positive wall velocity and negative wall velocity, with the plate being at varying orientations and distances from the wall. Substantial flow separation is found with reduced proximity to the wall or increased plate incidence, caused partly by the cutting off of the mass flux in the gap between the body and the wall as impact is neared. Other distinct flow characteristics that emerge with increased local Reynolds number are the extent of the enhanced wake responses, greatly condensed upstream influence near the leading edge, increased sensitivity to body orientation, the pressure dominance in the total lift and moment on the body, new insight into the complex flow structure and quantitative agreement with a recent viscous–inviscid interaction analysis on scales.

Information

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Figure 1.Sketch of the body situated near the wall within uniform shear flow parallel to the wall with the typical gap width of $O(1)$. (a) Zero wall velocity relative to the body. (b) Positive wall velocity relative to the body. (c) Negative wall velocity relative to the body.

Figure 1

Figure 2.Example of the fluid flow for a plate in uniform shear flow for $\beta _1 = 0.01$, (a) $R = 10$ for $u_w = 0.1$, (b) $R = 1000$ for $u_w = 0.1$, (c) $R = 10$ for $u_w = 0.0$, (d) $R = 1000$ for $u_w = 0.0$, (e) $R = 10$ for $u_w = -0.1$, (f) $R = 1000$ for $u_w = -0.1$.

Figure 2

Figure 3.Velocity profiles underneath and on top of the plate taken at various points for $u_w = 0.1$. Flow reversal is seen along the plate as the leading edge gap, $\beta _1$, decreases.

Figure 3

Figure 4.Velocity profiles underneath and on top of the plate taken at various points for $u_w = 0$. An eddy forms on the wall as the leading edge gap, $\beta _1$, becomes smaller.

Figure 4

Figure 5.Velocity profiles underneath and on top of the plate taken at various points for $u_w = -0.1$. Flow reversal becomes more prominent further along the body as the leading edge gap, $\beta _1$, decreases. An eddy is also forming ahead of the leading edge in most cases.

Figure 5

Figure 6.Velocity profiles upstream of the plate's leading edge for $u_w = 0.1$.

Figure 6

Figure 7.Velocity profiles upstream of the plate's leading edge for $u_w = 0$.

Figure 7

Figure 8.Velocity profiles upstream of the plate's leading edge for $u_w = -0.1$.

Figure 8

Figure 9.Velocity profiles of the plate's wake for $u_w = 0.1$.

Figure 9

Figure 10.Velocity profiles of the plate's wake for $u_w = 0$.

Figure 10

Figure 11.Velocity profiles of the plate's wake for $u_w = -0.1$.

Figure 11

Figure 12.Plot of pressure for $u_w = 0.1$, (a) along the length of the lower wall, (b) along the upper surface of the body, blue: $R = 10$, red: $R = 100$, yellow: $R = 1000$.

Figure 12

Figure 13.Plot of pressure for $u_w = 0.0$, (a) along the length of the lower wall, (b) along the upper surface of the body, blue: $R = 10$, red: $R = 100$, yellow: $R = 1000$.

Figure 13

Figure 14.Plot of pressure for $u_w = -0.1$, (a) along the length of the lower wall, (b) along the upper surface of the body, blue: $R = 10$, red: $R = 100$, yellow: $R = 1000$.

Figure 14

Table 1.Drag, lift and moment acting on the body for $u_w = 0.1$ with varying wall gap and local Reynolds number.

Figure 15

Table 2.Drag, lift and moment acting on the body for $u_w = 0.0$ with varying wall gap and local Reynolds number.

Figure 16

Table 3.Drag, lift and moment acting on the body for $u_w = -0.1$ with varying wall gap and local Reynolds number.

Figure 17

Figure 15.Wall pressure for $R = 1000$ with $\beta _1 = 0.01$ and $\beta _2 = 0.11, 0.21$ and $0.31$. With increased $\beta _2$, relative to fixed $\beta _1$, the adverse pressure gradients cover a larger region under the body and into the wake.

Figure 18

Figure 16.Wall pressure for $R = 1000$ with $u_w = 0.2$ and $-0.2$. With increased $u_w$ there are larger adverse pressure gradients under the body and in the wake.

Figure 19

Figure 17.Wall pressure for $\beta _1 = R^{-1/3}, \beta _2 = 2 \times R^{-1/3}$ and $u_w = R^{-1/3}$ with $R = 10, 50, 100, 500$ and $1000$. In each case the magnitude of the wall pressure is of the order $R^{-2/3}$, indicating (see also table 4) that a distinguished scaling exists between wall pressure and Reynolds number.

Figure 20

Table 4.Scaling results for magnitude of wall pressure compared to $R^{-2/3}$ for $R = 10, 50, 100, 500$ and $1000$, with $u_w = R^{-1/3}, \beta _1 = R^{-1/3}$ and $\beta _2 = 2 \times R^{-1/3}$. The magnitude of wall pressure is seen to be within a multiplicative constant of $R^{-2/3}$, hence the wall pressure appears to be $O(R^{-2/3})$ as expected.