Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T19:48:56.934Z Has data issue: false hasContentIssue false

The Behavior of Ion-Implanted Hydrogen in Gallium Nitride

Published online by Cambridge University Press:  13 June 2014

W.R. Wampler
Affiliation:
Sandia National Laboratories, Albuquerque, NM 87185-1056, smmyers@sandia.gov

Abstract

Hydrogen was ion-implanted into wurtzite-phase GaN, and its transport, bound states, and microstructural effects during annealing up to 980°C were investigated by nuclear-reaction profiling, ion-channeling analysis, transmission electron microscopy, and infrared (IR) vibrational spectroscopy. At implanted concentrations ∧1 at.%, faceted H2 bubbles formed, enabling identification of energetically preferred surfaces, examination of passivating N-H states on these surfaces, and determination of the diffusivity-solubility product of the H. Additionally, the formation and evolution of point and extended defects arising from implantation and bubble formation were characterized. At implanted H concentrations ∧0.1 at.%, bubble formation was not observed, and ion-channeling analysis indicated a defect-related H site located within the [0001] channel.

Information

Type
Research Article
Copyright
Copyright © 1999 Materials Research Society
Figure 0

Fig. 1.Calculated depth profiles of implanted 2H and the differential nuclear cross section for 0.85-MeV 3He with a scattering angle of 135°.

Figure 1

Fig. 2.Release of ion-implanted 2H from GaN during isochronal annealing.

Figure 2

Fig. 3.Depth profile of ion-implanted 2H in GaN after implantation of 1017 2H/cm2 at 50 keV and isochronal annealing extending to 886°C.

Figure 3

Fig. 4.High-resolution TEM images of bubbles in GaN: (a) plan-view in [0001] orientation and (b) cross-section in[110] orientation. The implanted layer was injected with 2×1016 1H/cm2 at room temperature, and the specimen was then annealed at 886°C for 1 hour.

Figure 4

Fig. 5.Infrared absorption peaks ascribed to 1H chemisorbed on bubble walls. The specimen was implanted with 2×10161H/cm2 in each of 5 layers and then annealed at 600°C for 1 hour.

Figure 5

Fig. 6.Decrease of H-related IR absorptions during isochronal annealing, compared with the loss of total H measured by NRA.

Figure 6

Fig. 7.Release of ion-implanted 2H from GaN during isothermal annealing at 886°C.

Figure 7

Fig. 8.Channeled RBS spectra from GaN before and after 2H implantation and annealing, obtained using 2-MeV 4He.

Figure 8

Fig. 9.High-resolution cross-section TEM image showing a part of one stacking fault in H-implanted GaN after annealing at 886°C.

Figure 9

Fig. 10.Channeling scans after implanting 10152H/cm2 into GaN at room temperature.