Skip to main content Accessibility help
×
Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T11:23:50.208Z Has data issue: false hasContentIssue false

6 - Microwave power measurements

from Part II - Microwave instrumentation

Published online by Cambridge University Press:  05 June 2013

Ronald Ginley
Affiliation:
NIST, USA
Valeria Teppati
Affiliation:
Swiss Federal University (ETH), Zürich
Andrea Ferrero
Affiliation:
Politecnico di Torino
Mohamed Sayed
Affiliation:
Microwave and Millimeter Wave Solutions, Santa Rosa
Get access

Summary

Introduction

In physics, power is the rate at which energy is transferred, used, or transformed. For example, the rate at which a light bulb transforms electrical energy into heat and light is measured in watts – the more wattage, the more power, or equivalently the more electrical energy is used per unit time [1]. Energy transfer can be used to do work, so power is also the rate at which this work is performed [2].

For systems or circuits that operate at microwave frequencies, the output power is usually the critical factor in the design and performance of that circuit or system. Measurement of the power (signal level) is critical in understanding everything from the basic circuit element up to the overall system performance. The large number of signal measurements that can be made and their importance to system performance means that the power-measurement equipment and techniques must be accurate, repeatable, traceable, and convenient.

In a system, each component in a signal chain must receive the proper signal level from the previous component and pass the proper signal level on to the succeeding component. If the output signal level becomes too low, the signal becomes obscured in noise. If the signal level becomes too high, though, the performance becomes nonlinear and distortion can result. The uncertainties associated with the measurement of power also play a very important role in the development and application of microwave circuits. For example, a 10 W transmitter costs more than a 5 W transmitter.

Information

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Book purchase

Temporarily unavailable

Save book to Kindle

To save this book to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about saving to your Kindle.

Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.

Find out more about the Kindle Personal Document Service.

Available formats
×

Save book to Dropbox

To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Dropbox.

Available formats
×

Save book to Google Drive

To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Google Drive.

Available formats
×