Introduction

Biotechnology is a major component of modern chemical engineering, and biotechnology appears to many observers to be a new thrust; yet, as noted in Chapter 1, biochemical engineering has been an essential part of chemical engineering since the development of the modern profession in the early part of the twentieth century. One important aspect of biotechnology, in fact its most traditional component, is the use of microorganisms to effect chemical change. We cited the microbiological production of acetone and penicillin as two classic examples in Chapter 1.

In terms of annual throughput, the activated sludge process for wastewater treatment is by far the most widely used biochemical process in the world, and it provides a useful framework for discussing some interesting features of bioreactor design and performance. The entire process flowsheet is shown schematically in Figure 8.1. The wastewater feed contains organic materials, commonly measured in toto as biological oxygen demand (BOD), that are used as nutrients by microorganisms; the organisms produce water and CO2 as metabolic products. The primary settler is there to remove large objects. The heart of the process is the aeration basin; this is a reactor in which a suspension of microorganisms in porous flocs is brought into contact with the BOD. The microorganisms are aerobic, meaning that they require oxygen for metabolism, so air or enriched air is added to keep the oxygen concentration in the water above a critical level of about 2 g/m3 (2 ppm).