from PART I
Published online by Cambridge University Press: 05 June 2012
Heat exchanger analysis follows the same procedures as chemical reactor analysis with the added complication that we need to deal with two control volumes separated by a barrier of area a. As shown in Table 3.1 we need to consider both tank type and tubular systems and allow for mixed–mixed, mixed–plug, or plug–plug fluid motions.
A heat exchanger is any device in which energy in the form of heat is transferred. The types of heat exchangers in which we will be most interested are devices in which heat is transferred from a fluid at one temperature to another at a different temperature. This is most commonly done by the confinement of both fluids in some geometry in which they are separated by a conductive material. In such devices the area available for heat transfer is set by the device type and size, and is often the object of a design calculation. If the two fluids are immiscible it is possible to exchange heat by direct contact of one fluid with the other, but such direct contact heat exchange is somewhat unusual. It is, however, the configuration most commonly employed to transfer mass between two fluids, and as such, will be treated in detail in Chapter 4. Note that the area for heat (and mass) transfer is much more difficult to measure or calculate in direct fluid–fluid contacting.
A simple heat exchanger, easily constructed, is one in which the fluids are pumped through two pipes, one inside the other.
To save this book to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Find out more about the Kindle Personal Document Service.
To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Dropbox.
To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Google Drive.